ECA EIA-60384-23-2014 Fixed Capacitors for Use in Electronic Equipment - Part 23 Sectional Specification - Fixed Surface Mount Metallized Polyethylene Naphthalate Film Dielectric D.pdf

《ECA EIA-60384-23-2014 Fixed Capacitors for Use in Electronic Equipment - Part 23 Sectional Specification - Fixed Surface Mount Metallized Polyethylene Naphthalate Film Dielectric D.pdf》由会员分享，可在线阅读，更多相关《ECA EIA-60384-23-2014 Fixed Capacitors for Use in Electronic Equipment - Part 23 Sectional Specification - Fixed Surface Mount Metallized Polyethylene Naphthalate Film Dielectric D.pdf（33页珍藏版）》请在麦多课文档分享上搜索。

1、 EIA STANDARD Fixed Capacitors for Use in Electronic Equipment Part 23: Sectional Specification Fixed Surface Mount Metallized Polyethylene Naphthalate Film Dielectric DC Capacitors EIA-60384-23 (IEC 60384-23:2006, IDT) October 2014 ANSI/EIA-60384-23-2014 Approved: October 3, 2014 EIA-60384-23 NOTIC

2、E EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay th

3、e proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of ECIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publication

4、s preclude their voluntary use by those other than ECIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by ECIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, ECIA does not

5、assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This EIA Standard is identical (IDT) with the International Standard IEC Publication 60384-23:2006: Fixed Capacitors for Use in Electronic Equipment Part 23: Sectiona

6、l Specification Fixed Surface Mount Metallized Polyethylene Naphthalate Film Dielectric DC Capacitors. This document is the EIA Standard EIA-60384-23 2014 Edition 1: Fixed Capacitors for Use in Electronic Equipment Part 23: Sectional Specification Fixed Surface Mount Metallized Polyethylene Naphthal

7、ate Film Dielectric DC Capacitors. The text, figures and tables of IEC 60384-23:2006 are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). These materials are subject to copyright claims of IEC and ECIA. No part of this publication may be reprodu

8、ced in any form, including an electronic retrieval system, without the prior written permission of ECIA. All requests pertaining to EIA-60384-23 2014 Edition 1: Fixed Capacitors for Use in Electronic Equipment Part 23: Sectional Specification Fixed Surface Mount Metallized Polyethylene Naphthalate F

9、ilm Dielectric DC Capacitors should be submitted to ECIA at the address below. The IEC copyrighted material has been reproduced with permission from ANSI. The IEC Foreword and Introduction are not part of the requirements of this standard but are included for information purposes only. This Standard

10、 does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use.

11、(From Standards Proposal No. 5270, formulated under the cognizance of the P-2.2 Committee on EIA Paper, Film, Mica any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with th

12、e IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly

13、 as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that s

14、ense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees u

15、ndertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedur

16、e to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents

17、including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or

18、reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of t

19、he elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-23 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This bilin

20、gual version (2006-05) replaces the English version. The text of this standard is based on the following documents: FDIS Report on voting 40/1503/FDIS 40/1532/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The F

21、rench version of this standard has not been voted upon. EIA-60384-23 Page 2 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 60384 consists of the following parts, under the general title Fixed capacitors for use in electronic equipment: Part 1: Generic specif

22、ication Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric DC capacitors Part 3: Sectional specification: Fixed tantalum chip capacitors Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte Part 5: Sectional

23、 specification: Fixed mica dielectric DC capacitors with a rated voltage not exceeding 3000 V - Selection of methods of test and general requirements Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric DC capacitors Part 7: Sectional specification: Fixed polystyrene film

24、dielectric metal foil DC capacitors Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil DC capac

25、itors Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil DC capacitors Part 13: Sectional specification: Fixed polypropylene film dielectric metal foil DC capacitors Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and conn

26、ection to the supply mains Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte Part 16: Sectional specification: Fixed metallized polypropylene film dielectric DC capacitors Part 17: Sectional specification: Fixed metallized polypropylene film dielectric A

27、C and pulse capacitors Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid and non-solid electrolyte Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric chip DC capacitors Part 20: Sectional specification: Fixed metalliz

28、ed polyphenylene sulfide film dielectric chip DC capacitors Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 Part 23: Sectional specifi

29、cation Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors (this publication) EIA-60384-23 Page 3 The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webst

30、ore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. EIA-60384-23 Page 4 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 23: Sectional specification Fixed surface mount metallized p

31、olyethylene naphthalate film dielectric DC capacitors 1 General 1.1 Scope This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized co

32、nnecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have “self-healing properties“ depending on conditions of use. They are primarily intended for applications where the AC component is small with

33、respect to the rated voltage. Capacitors for radio interference suppression are not included, but are covered by IEC 60384-14. 1.2 Object The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1 (1999), the appropriate quality assessment proced

34、ures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level, lower performance levels are not pe

35、rmitted. 1.3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60062: Mark

36、ing codes for resistors and capacitors IEC 60063:1963, Preferred number series for resistors and capacitors Amendment 1 (1967) Amendment 2 (1977) IEC 60068-1, Environmental testing Part 1: General and guidance1IEC 60384-1:1999, Fixed capacitors for use in electronic equipment Part 1: Generic specifi

37、cation IEC 60410: Sampling plans and procedures for inspection by attributes ISO 3:1973, Preferred numbers Series of preferred numbers _ 1For the tests in the IEC 60068 series of publication, the editions referenced in the applicable test clauses of the generic specification shall be used. EIA-60384

38、-23 Page 5 1.4 Information to be given in a detail specification Detail specifications shall be derived from the relevant blank detail specification. Detail specifications shall not specify requirements inferior to those of the generic, sectional or blank detail specification. When more severe requi

39、rements are included, they shall be listed in 1.9 of the detail specification and indicated in the test schedules, for example by an asterisk. NOTE The information given in 1.4.1 may, for convenience, be presented in tabular form. The following information shall be given in each detail specification

40、 and the values quoted shall preferably be selected from those given in the appropriate clause of this sectional specification. 1.4.1 Outline drawing and dimensions There shall be an illustration of the capacitor as an aid to easy recognition and for comparison of the capacitor with others. Dimensio

41、ns and their associated tolerances, which affect interchangeability and mounting, shall be given in the detail specification. All dimensions shall preferably be stated in millimetres, however, when the original dimensions are given in inches, the converted metric dimensions in millimetres shall be a

42、dded. Normally, the numerical values shall be given for the length, width and height of the body. When necessary, for example when a number of items (sizes and capacitance/voltage ranges) is covered by a detail specification, the dimensions and their associated tolerances shall be placed in a table

43、below the drawing. When the configuration is other than described above, the detail specification shall state such dimensional information as will adequately describe the capacitor. 1.4.2 Mounting The detail specification shall give guidance on methods of mounting for normal use. Mounting for test a

44、nd measurement purposes (when required) shall be in accordance with 4.1. 1.4.3 Ratings and characteristics The ratings and characteristics shall be in accordance with the relevant clauses of this specification, together with the following: 1.4.3.1 Rated capacitance range See 2.2.1. NOTE When product

45、s approved to the detail specification have different ranges, the following statement should be added: “The range of capacitance values available in each voltage range is given in IEC QC 001005.“ 1.4.3.2 Particular characteristics Additional characteristics may be listed, when they are considered ne

46、cessary to specify adequately the component for design and application purposes. EIA-60384-23 Page 6 1.4.3.3 Soldering The detail specification shall prescribe the test methods, severities and requirements applicable for the solderability and the resistance to soldering heat tests. 1.4.4 Marking The

47、 detail specification shall specify the content of the marking on the capacitor and on the package. Deviations from 1.6 shall be specifically stated. 1.5 Terms and definitions For the purposes of this document the definitions of IEC 60384-1 and the following definitions apply: 1.5.1 surface mount ca

48、pacitor capacitor whose small dimensions and nature or shape of terminations make it suitable for surface mounting in hybrid circuits and on printed boards 1.5.2 performance grade 1 capacitors (long-life) capacitors for long-life applications with stringent requirements for the electrical parameters

49、 1.5.3 performance grade 2 capacitors (general purpose) capacitors for general application where the stringent requirements for grade 1 capacitors are not necessary 1.5.4 performance grade 3 capacitors (low temperature, miniature type) miniature type capacitors having a rated temperature of 85 C and for which less stringent requirements than for grade 2 capacitors are acceptable 1.5.5 rated voltage URmaximum DC voltage which may be applied continuously to a capacitor at the rated temperature NOTE The sum of the DC voltage and the peak AC voltage