DLA MS27471 REV G-2012 CONNECTORS RECEPTACLE ELECTRICAL SOLDER MOUNTING SOLDER TYPE HERMETIC SEAL SERIES I.pdf

《DLA MS27471 REV G-2012 CONNECTORS RECEPTACLE ELECTRICAL SOLDER MOUNTING SOLDER TYPE HERMETIC SEAL SERIES I.pdf》由会员分享，可在线阅读，更多相关《DLA MS27471 REV G-2012 CONNECTORS RECEPTACLE ELECTRICAL SOLDER MOUNTING SOLDER TYPE HERMETIC SEAL SERIES I.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、MS27471G 13 April 2012 SUPERSEDING MS27471F 12 July 2002 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER MOUNTING, SOLDER TYPE, HERMETIC SEAL, SERIES I This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acqu

2、iring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, class Y. AMSC N/A FSC 5935 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27471G 2 FIGURE 1. Receptacle, class Y - Con

3、tinued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27471G 3 Shell size K + .016 - .005 M + .031 - .000 MM +.031 -.000 DD dia +.001 -.005 S dia .016 O.D. U +.005 -.011 XX max 9 .031 .747 .659 .672 .750 .390 .187 11 .781 .844 13 .906 .969 15 1.0

4、31 1.094 17 1.156 1.218 19 1.250 1.312 21 1.375 1.438 23 1.500 1.563 .218 25 1.625 1.688 Inches mm Inches mm Inches mm Inches mm .001 0.03 .116 2.95 .672 17.07 1.156 29.36 .004 0.10 .126 3.18 .747 18.97 1.218 30.94 .005 0.13 .187 4.75 .750 19.05 1.250 31.75 .008 0.20 .218 5.54 .781 19.84 1.312 33.32

5、 .010 0.25 .359 9.12 .844 21.44 1.375 34.93 .011 0.29 .390 9.91 .906 23.01 1.438 36.53 .016 0.41 .391 9.93 .969 24.61 1.500 38.10 .031 0.79 .576 14.63 1.031 26.19 1.563 39.70 .063 1.60 .659 16.74 1.094 27.79 1.625 41.28 1.688 42.88 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given

6、for information only. 3. For main keyway and keyway positions, see MIL-DTL-38999. 4. Diameters DD and S shall be concentric with .015 inches (0.381 mm) TIR. FIGURE 1. Receptacle, class Y - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS

7、27471G 4 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. Mating connectors: MS27467, MS27661 and MS27653. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27471 Y 23 D 21 P A MS number Class Shell size F

8、inish Insert arrangement Contact style Polarizing positions (No letter is required for normal) Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to

9、MIL-DTL-38999, this document references the following: MIL-STD-1560 MS27467 MS27653 MS27661 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 85 (Project: 5935-2012-025) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: Th

10、e activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-