DLA MS27384 REV B-2003 ADAPTER ASSEMBLY FLARELESS 45 DEG FORGED ELBOW TUBE TO HOSE-WITH SWIVEL NUT《45度断接弯管到胶皮管旋转螺母承插适配器装配》.pdf

《DLA MS27384 REV B-2003 ADAPTER ASSEMBLY FLARELESS 45 DEG FORGED ELBOW TUBE TO HOSE-WITH SWIVEL NUT《45度断接弯管到胶皮管旋转螺母承插适配器装配》.pdf》由会员分享，可在线阅读，更多相关《DLA MS27384 REV B-2003 ADAPTER ASSEMBLY FLARELESS 45 DEG FORGED ELBOW TUBE TO HOSE-WITH SWIVEL NUT《45度断接弯管到胶皮管旋转螺母承插适配器装配》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 DETAIL SPECIFICATION SHEET ADAPTER ASSEMBLY, FLARELESS, 45 FORGED ELBOW, TUBE TO HOSE - WITH SWIVEL NUT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specificatio

2、n and MIL-DTL-27272. NOTE: Dimension A is measured between the hose end of the socket and the free end of the radius MS8000 series seal insert at its centerline when the socket is assembled on the nipple subassembly. FIGURE 1. Adapter assembly illustration. AMSC N/A 1 of 3 FSC 4730 DISTRIBUTION STAT

3、EMENT A. Approved for public release; distribution is unlimited. MS27384B 24 September 2003 SUPERSEDING MS27384A 30 June 1972 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27384B 2 REQUIREMENTS Intended use. This adapter is intended fo

4、r use with hose conforming to MIL-DTL-27267. Dimensions. Dimensions are in inches. Material. PIN suffix C, corrosion-resistant steel. No PIN suffix. Combination of aluminum alloy and corrosion-resistant steel. See applicable specification sheet and MIL-DTL-25579 for material of other components iden

5、tified in table I for their material requirements. Identification of product. The Part or Identifying Number (PIN) and the manufacturers PIN and Government Entity (CAGE) Code shall be marked on a removable tag securely attached to the adapter. The PIN for this assembly shall be as specified in table

6、 I (e.g., MS27384-4C). Order of precedence. This specification takes precedence over the documents referenced herein. Unless otherwise specified, referenced documents shall be of the issue in effect on the date of solicitation. Adapter assembly illustration. See figure 1. Flareless fitting, hose con

7、nector design. Use MIL-DTL-25579/1 for application of NAS 1760. TABLE I. Adapter assembly composition. PIN 1/ Elbow subassembly PIN Sleeve PIN Socket PIN A 2/ max MS27384 MS27389 MS27070 MS27069 -3/-4C 3/ -3/-4C -4C -4C 1.92 -4C -4C -5C -5C -5C -5C 1.99 -6C -6C -6C -6C 2.11 -8C -8C -8C -8C 2.73 -8 -

8、8 1/ If required, lockwire holes to be drilled in accordance with SAE AS1043 and suffix L added to the Part of Identifying Number (PIN) (e.g., MS27384-8CL). 2/ Dimension A is measured between the hose end of the socket and the free end of the radius MS8000 series seal insert at its centerline when t

9、he socket is assembled on the nipple subassembly. 3/ Swivel nut and sealing surface of this elbow subassembly shall mate with SAE AS33514-3. The remaining portion of the subassembly shall mate with M27267-4 hose. Changes from previous issue. Marginal notations are not used in this revision to identi

10、fy changes with respect to the previous issue, due to the extent of the changes to complete reformatting. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27384B 3 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 (Project 4730-0868-023) DLA - CC Review activities: Army - AR, AT, MI Navy - MC, SA, SH Air Force - 71 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-