DLA MIL-B-87018 A-1982 BAG MONEY [Use DLA A-A-55179]《钱袋[使用 DLA A-A-55179]》.pdf

《DLA MIL-B-87018 A-1982 BAG MONEY [Use DLA A-A-55179]《钱袋[使用 DLA A-A-55179]》.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-B-87018 A-1982 BAG MONEY [Use DLA A-A-55179]《钱袋[使用 DLA A-A-55179]》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、i MIL-B-87018A( NU) 4 June 1982 SUPERSEDING 30 March i976 MIL-B-87018 (SA) MILITARY SPECIFICATION BAG, MONEY This specification is approved for use by the Navy Clothing and Textile Research Facility, Department of the Navy, and is available for use by all Departments and Agencies of the Department o

2、f Defense. 1. SCOPE 1.1 Scope. This specification covers the requirements for a leather money bag. 2. APPLICABLE DOCUMENTS 2.1 Issues of documents. The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specifi- cation to the extent

3、 specified herein: SPECIFICATIONS FEDERAL v-276 v-285 V-T- 291 V-T-295 FF-R-556 KK-L- 154 PPP-B-636 - Thread, Cotton - Thread, Polyester - Thread, Linen - Thread, Nylon - Rivets, SolLd, Small; Rivets, Split, Small; Rivets, - Leather, Cattlehide (Bag and Cace) - Boxes , Shipping Fiberboard Tubular Sm

4、all; and Burr and Cap Rivets; General Purpose MILITARY MIL-F-10884 - Fasteners, Snap Beneficial comments (recommendations , additions , deletions and any pertinent data which may be of use in improving this document should be addressed to: Officer in Charge, Navy Clothing and Textile,Research Facili

5、ty, 21 Strathmore Road, Natick, MA 01760, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. FSC 8460 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILB-87018

6、A(NU) I STANDARDS FEDERAL FED-STD- 751 FED-STD- 311 MILITARY MILSTD-105 MIL-S TB 129 MIL-STD-130 - Stitches, Seams and Stitchings - Leather, Methods of Sampling and Testing - Sampling Procedures and Tables for Inspection by - Marking for Shipment and Storage - Identification Marking of US Military P

7、roperty Attribut es (Copies of specifications, standards, drawings and publications required by contractors in connection with specific procurement fuctions should be obtained from the procuring activity or as directed by the contracting officer). LAWS AND REGUL FRONT HASP 4 0. I RIVETSA I BOTTOM FI

8、GURE 1 - MONEY BAG 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ MIL-B-87038A 84 M 9799906 0407963 2 STRAPLOOP 0 j 9 ST ITCH I NG JOINING OFSTRAPS AT BOTTOM OF BAG REINFORCEMENT END PANEL ASSEMBLY r f-4k-i INSERTON OF BOTTOM LOOP FIGURE 2- DETA

9、ILS (See Figura i) / 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-B7OLBA 84 M 977970b O4097b2 4 M I I. I I END LND RENFoFUMUIT PANEL FIGURE 3- BOTTOM/END ASSEMBLIES 7 - -_ - _- 1 Provided by IHSNot for ResaleNo reproduction or networking p

10、ermitted without license from IHS-,-,-MIL-B- 87018 (NU) 3.8 Identification marking. Identification marking shall be in accordance with MILSTD-130, in a contrasting color on the inside OP the top flap, lettering shall be at least 3/16 inch high. ing information: All l Markings shall contain the follo

11、w- BAG, MONEX Name of Contractor Contract No. us Stock NO, 3.9 Workmanship. The finished money bags shall conform to the quality established by this specification. the applicable acceptable quality levels. The occurrence of defects shall not exceed 4, QUALITY ASSURANCE PROVISIONS 4.1 Responsibility

12、for. inspection. Unless otherwise specified in the contract, the contractor is responsible for the performance of all inspection requirements as specified hereiri; may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved

13、 by the Government. The Government reserves the right to perform any of the inspections set forth in this specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. Except as otherwise specified in the contract, the contractor 4.1.1

14、Certificate of compliance. Where certificates of cornpliance are sub:. mitted, the Government reserves the right to check test such items to determine the validity of the certification. 4.2 First article inspection. The first article, submitted in accordance with 3.2, shall be ihspected as specified

15、 in 4.3.2 for compliance with design, con- struction, workmanship and dimensional requirements. 4.3. Inspection. Sampling for inspection shall be performed in accordance with MIL-STD-105, except where otherwise indicated. 4.3.1 Component and material inspection. In accordance with 4.1 above, com- po

16、nents and materials shall be inspected and tested in accordance with all Eequirements of referenced specifications , drawings , and standards unless other- wise excluded, amended, modified, or qualified in this specification or applicable purchase document. ponents and materials listed in Table I. A

17、ll test reports shall contain the individual values utilized in expressing the final result. The lot shall be unacceptable if one or more sample units fail to meet the requirements specified. In addition, testing shall be performed on com- 8 Provided by IHSNot for ResaleNo reproduction or networking

18、 permitted without license from IHS-,-,-MIL-B-870LA 84 7777906 0407964 8 .o 3 4 (d al al 4-P m 83 ri Cu a al -P cd t: rl rl rl al rl -P o 2 8 RI al P rl d .rl B a E: cd a al -P dldl c!J w B rlrll-l rlrl f-c- AA, ciri mmM i mM mm MMM GM vivi M vi. . . .a -Pk al rl % t: 9 ,- Provided by IHSNot for Res

19、aleNo reproduction or networking permitted without license from IHS-,-,-MIL-B- 87018A( Nu) 4.3.2 Exmination -I of the end item. The defects found during the examination of the end item shall be classified in accordance with 4.3.2.1 and 4.3.2.2. sample unit shall be one finished money bag, and accept

20、able quality levels shall be as specified in 4.3.2.3. The The applicable inspection levels 4.3.2.1 Visual examination. The finished money bags shall be examined for the defects listed below: Clas si f i cat ion Examine Def ecL Major Minor Leather Thread Metal components Construction and workmanship

21、- - Color not is specified, not uniform Grain not. as specified Hole, cut or torn area on exterior of haec Grub marks, open or badly healed scratches, brands, boney, loose or pipey leather Heavy fat wrinkles, stretchy leather Grain side not finished as specified Finish not as specified Shade does no

22、t match color of leather Not specifed size or type Lock not approved ty-pe Finish not as specified Studs, rivets, caps and washers not as specified = Design not as specified Any component not made from material Any component missing or operation not Any leather component not attached Caps and rivets

23、 or studs not securely Lock does not function properly Caps and rivets or studs loose but Keys missing or do not operate lock Rivets reversed Sharp burrs or sliver on metal components Not specified stitch type or seam type specified performed 8s specified with grain side out clinched and may become

24、detached in use securely attached 10 X X X X X X X X X X X X X X X X X X X X X X X Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-870LA 84 m 77777Ob 04077bb L m MILB-87018A (NU) Class if i cat ion Examine Defect Major Minor Construction and Ga

25、uge of stitching irregular Loose stitch tension causing Lock stitches exposed on surface Tight stitch tension rupturing workmanship (contd) X loose seam of leather leather X stitches per inch X Any row of stitching omitted X Fewer than specified number of More stitches per inch than specified Open s

26、eam (A sem shall be classified as open when one or more stitches joining a seam are broken or when two or more continuous stitches or runoffs X occur) Thread ends not trimmed or removed Any spot or stain on exterior of bag Any spot, stain, or foreign matter clearly noticeable: that can be removed th

27、at can not be removed X hasp X Staple does not align properly with Missing, incomplete, incorrect, not legible, improper location, not specified size X X X X Marking X 4.3.2.2 Examinatiion for dimensions. The finished money bags shall be examined for defects in dimension. in Figures 1 or 2 shall be

28、classified as a defect. Any dimension that is not within tolerances specified 4.3.2.3 Inspection levels and acceptable quality levels. The inspection levels (AQLs) expressed in defects per hundred units (DHU) shall be as follows: Major AQLs Total Inspection level For defects applicable to 4.3.2.1 Fo

29、r defects applicable to 4.3.2.2 For defects applicable to 4.3.3 II 2.5 6.5 s-2 2.5 s-2 2.5 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL- B- 87 O 18A ( Nu ) 4.3.3 Examination of packaging requirements. An examination sh&ll be made to determi

30、ne that packaging, packing, and marking comply with Section 5 requirements. Defects shall be scored in-accordance with the list below. be one shipping container fully prepared for delivery except that it need not be sealed. Defects of closure shall be examined on shipping containers fully pre- pared

31、 for delivery. The lot size shall be the number of shipping containers in the end item inspection lot. level shall be as specified The sample unit shall The inspection lot level and acceptable quality in 4.3.2.3. Examine Defect I Marking (interior and Omitted, incorrect, illegible, or improper size,

32、 Materials Any component missing or not as specified. Any component damaged. Workmanship Inadequate application of components, such as: exterior 1 location, sequence or method of application. incomplete closure of container flaps, loose strapping, inadequate stapling. Bulging or distortion of contai

33、ners. Number of items per container is more or less than Content specified. 5. PACKAGING 5.1 Preservation packaging. Packaging shall be level A or C (commercial) as specified (see 6.2). 5.1.1 Levei A. Each money bag shall be closed and strap handles secured. The lock and two keys shall be securely t

34、ied to one of the strap handles. shall be completely wrapped in a suitable commercial kraft paper and secured with a gmed paper tape. end polyethylene bag. closed by a suitable commercial practice. a snug-fitting fiberboard container conforming to Type CF, class domestic, grade 200, variety SW, styl

35、e FOL of PPP-B-636. appendix of the container specification. Each bag As an alternate, each bag may be placed in a clear, open The open end of the bag shall be folded over or may be Each prepared bag shall be packaged in Closure shall be in accordance with the 5.1.2 Level C (commercial). adequate pr

36、otection against physical damage during shipment from the contractor to the first receiving activity. used by the contractor for retail distribution. The money bag shall be packaged to afford The package shall be the same as that normally 5.2 Packing. 5.2.1 Level A. Packing shall be level A, B or C

37、(commercial) as specified. Eight (8) packages, preserved as specified in 5.1, shall be packed in a snug-fitting fiberboard shipping container conforming to Type CF or SF, class weather-resistant, variety SW, grade V3c or VS, style RSC of PPP-B-636. Each container shall be closed, waterproofed and re

38、inforced in accordance with the appendix of the box specification. 12 7- - .f . . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - . MIL-B-870LA 4 m 77777Ob 04077b 5 m - MIL-B-87018A( NU) 5.2.2 Level B. Eight (8) packages, preserved as specified in

39、 5.1, shall be packed in a snug-fitting, fiberboard shipping container, conforming to Type CF, class domestic variety SW, grade 200, style RSC of PPP-B-636. shall be closed in accordance with Method II of the appendix of the box specification. Each container O 5.2.2 Weather-resistant fiberboard cont

40、ainers. When specified (see 6.2) , the shipping container shall be a grade VC, W5c or W6c fiberboard box fabricated in accordance with PPP-B-636 and closed in accordance with the appendix of the container specification. 5.2.3 Level C (commercial). Packages, preserved as specified in 5.1, shall be pa

41、cked in a manner to insure carrier acceptance and safe delivery at destination at the lowest transportation rate for such supplies. container shall be the same as that normally used by the contractor for retail distribution. Containers shall comply with te US Postal Manual, Uniform Freight Classific

42、ation Rules or National Motor Freight Classification Rules as applicable. The quantity per shipping 5.3 Marking. In addition Lo any special marking required by the contractor or order, interior packages and shipphg containers shall be marked in accordance with MIL-STD-129. 6. NOTES 6.1 Intended use.

43、 The money bag covered by this specification is used for the transportation of money. 6.2 Ordering data. Procurement documents should specify the following: (a) (b) (c) (a) Title, number and date of this specification. Whether first article sample is required (see 3.2). Selection of applicable level

44、s of packaging and packing (see 5.1 and 5.2). When weather resistant grade fiberboard shipping containers are required for level B packing (see 5.2.2.1). 6.3 Samples. For access to samples, address the procuring activity issuing the invitation for bids. 6.4 Acceptable brass lock components specified

45、 in 3.3.7 are style #450 swivel and plate from Presto Lock Company, 100 Outwater Lane, Garfield, NJ 07026. Custodian : Navy - Nu Review Activity: DLA - CT Preparing activity: Navy - NIT Project NO. 8460-NO63 User Activity: Navy - MC *US GOVERNMENT PRINTING OFFICE: 1982-505-02213185 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4 I o olt -7 # - -y- -. .* - I I I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-