DLA A-A-59358-2003 UNDERSHIRT MID WEIGHT SPEAR SYSTEM LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP) LAYER-2《环保轻型矛系统中重贴身内衣》.pdf

《DLA A-A-59358-2003 UNDERSHIRT MID WEIGHT SPEAR SYSTEM LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP) LAYER-2《环保轻型矛系统中重贴身内衣》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-59358-2003 UNDERSHIRT MID WEIGHT SPEAR SYSTEM LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP) LAYER-2《环保轻型矛系统中重贴身内衣》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-59358 INCHPOUND A-A-59358 27 August 2003 _ COMMERCIAL ITEM DESCRIPTION UNDERSHIRT, MID WEIGHT, SPEAR System, Lightweight Environmental Protection (LEP), Layer-2 1. SCOPE 1.1 Scope. This Commercial Item Description covers the requirements for Layer 2- Mid Weight Undershirt fabricated in 100% Visa

2、 Polyester Double Knit Interlock to wick moisture / perspiration away from the body. The undershirt is intended for wear by male and female military personnel of the Department of Defense as an insulation layer of the Extended Cold Weather Clothing System (ECWCS). 2. CLASSIFICATION The Undershirt sh

3、all be color Black 470 or Camouflage Green 483, as specified. The undershirt shall be of one type in the following sizes as specified: SCHEDULE OF SIZES Small- Regular Medium-Regular Large-Regular Large-Long Extra Large-Regular Extra Large-Long. Beneficial comments (recommendations, additions, delet

4、ions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DSCP-COCT, 700 Robbins Ave Philadelphia, PA 19111-5096. AMSC N/A FSC 8415 DISTRIBUTION STATEMENT A. Approved for public rel

5、ease; distribution is unlimited. 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59358 3. SALIENT CHARACTERISTICS 3.1 Design and Construction. The undershirt shall have a low bulk, fold over collar, contoured longer tail in back, long sleeves an

6、d a neck to chest zipper opening to allow ventilation. All joining seams shall be flat locked construction to reduce chaffing and improve comfort during movement. 3.2 Basic Material. The following material shall be used to provide the environmental protection, user comfort; lightweight and durabilit

7、y needed for wear in field, combat, and operations other than war. The basic material for the undershirt shall be 100% polyester double knit interlock, Milliken Visa style# 696374 or product with equivalent performance characteristics. The contracting officer must approve any alternate material with

8、 equivalent performance characteristics. The fabric shall be Black 470 or Camouflage Green (CG-483). The material provides the required military appearance and functionality required by the military. The fabric shall conform to the following requirements: Fabric Specifications Characteristic Require

9、ment Test Method Fiber Content 100% Visa Polyester. Yarn Source U.S.A. Construction Double Knit Interlock Width 60 inches minimum 62 inches maximum Weight per square yard Weight per linear yard 5.65 +/- .25 ounces 9.75 +/- .25 ounces ASTM D3776 Pilling 1.0 for 30 minutes after 1 wash ASTM D-3512, Ra

10、ndom Tumble Method Soil release (after 5 washes) 4.0 AATCC TM 135-3 cycles, 2, III, A,iiiMoisture transport (after 5 washes) 1.0 vs a standard of = 5.0 AATCC TM 135-3 cycles, 2, III, A, iii Stretch Wales - 16.5% Courses - 92.5% ASTM D2594, Form fit Dimensional Stability Wales - 2.8% max. Courses - 4

11、.0% max. AATCC TM 135-3 cycles, 2, III, A, iii Air permeability test 395 cu.ft./min/sq.ft. ASTM D737 Water Vapor Transmission Test Run under test conditions of 70 F and 50% RH for 24 hours (upright); calculationsfor the loss per sq. meter over 24 hour period = 330.3 grams. ASTM E96 Colorfastness: La

12、undering Crocking, Dry comfort and durability in use during field duties, combat, and operations other than war. End item construction and appearance shall conform to Figure 1Undershirt. 3.8 Seaming. The seams shall be consistent, exhibit a uniform appearance and conform to the ASTM D-6193, Stitch a

13、nd Seam Types listed in the Construction of Undershirt below. All material edges shall not ravel. 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59358 TABLE II. Constructions of Undershirt No. Operation Stitch Type Seam TypeUNDERSHIRT 1. 2. 3.

14、4. 5. 6. 7. 8. 9. Join shoulders together. Set collar to neck with label. Join collar tab pieces together and top stitch. Over edge front facing. Join front facing to collar . Turn collar inside and sew to back neck and facing. Set front zipper with collar tab. Set sleeves, close sleeves and side se

15、ams. Hem 1/2 inch 1/8 inch the edge of sleeves, and bottom of the undershirt. 607 301 301 504 505 301 301 607 605 FSa-1 SSa-1 SSe-2 (a/b) EFd-1 SSa-1 SSa-1 LSbr-3 FSa-1 EFa-2 4. REGULATORY REQUIREMENTS 4.1 Recycled, Recovered, or Environmentally Preferable Materials. Recycled, recovered, or Environm

16、entally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE 5.1 Product Conformance. The products provided shall me

17、et the salient characteristic of this commercial item description, and shall conform to cited patterns, specifications, standards and quality assurance practices. The Government reserves the right to require proof of such conformance. 5.2 Quality Conformance Inspection. Sampling for inspection shall

18、 be performed in accordance with ANZI/ASQCZ1.4, as defined by contract, except where otherwise indicated. 5.3 Component and End Item Inspection. In accordance with 3.2 and 5.1, components and end items shall be tested in accordance with all the requirements of referenced documents unless otherwise e

19、xcluded, amended, modified, or qualified in this document or applicable procurement documents. The Government reserves the right to inspect all components and end items to determine conformance to requirements. 5.4 End Item Visual Examination. The Undershirts shall be examined for the major defects

20、listed below. 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59358 EXAMINATION DEFECT Component part omitted, distorted, full, tight, or twisted; any part of Undershirt caught in any unrelated stitching, the edge of any component part required

21、to be forced out having folds of more than 1/8 inch . Hole, cut, tear, smash, burn, drill hole, run, thin place, dye streak, color not as specified, misweave affecting appearance or serviceability. Material and Workmanship Seam: puckered, distorted, pleated, wavy, twisted, irregular or open, loose o

22、r tight stitch tension, broken or missing thread or stitch, needle chew, visible mend, edge or raised stitching sewn too close to edge, resulting in damage to cloth, seam allowance not as specified, raw edge affecting appearance or serviceability. Cleanness Spot, stain, excessive thread ends not tri

23、mmed or removed, odor, affecting appearance or serviceability. Shade Shade variation within a part or between parts. Thread color not as specified. Labels Omitted, incorrect, illegible, not attached where specified; bar-codes omitted, not readable by scanner; human-readable interpretation (HRI) omit

24、ted or illegible; bar- code not visible on folded, packaged item; bar- code attachment causes damage to the item. Packaging Any Undershirt not packaged in accordance with the contract or purchase order. 5.5 Finished Dimensions. The finished Mid Weight Underwear shall conform to the measurements in i

25、nches listed in the Table-III. Table - III. Undershirt Finished Measurements SIZE 1/2 - CHEST (1) 1/2 - NECK (2) BACK LENGTH (3) SMALL 19-1/2” 7-7/8” 31-1/2”MEDIUM 21” 8-1/4” 32”LARGE 22-1/2” 8-5/8” 32-1/2” X-LARGE 24-1/2” 9-1/8” 33”LARGE-LONG 22-1/2” 8-5/8” 34-1/2” X-LARGE-LONG 24-1/2” 9-1/8” 35”TO

26、LERANCE 1/2” 1/4” + 1”/- 3/4” (1) Chest measurement taken from armseye to armseye with garment laid flat. (2) Neck measurement taken along neckline folded edge to folded edge with garment laid flat. (3) Back Length measurement taken from center back of collar seam to bottom of shirt with garment lai

27、d flat. 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59358 Collar Height: 4-1/8 inches, 1/4 inch, for all sizes. 6. PACKAGING 6.1. Packaging, Packing, Marking and Palletization. Packaging, packing marking and palletization shall be in accorda

28、nce with ASTM D 3951. Each pair of undershirts shall be packed individually in an commercially acceptable plastic bag and thirty (30) undershirts shall be packed in each box type CF or SF, class domestic, style RSC (variety sw with dw liner), grade 275. 6.2 Marking. Marking shall be in accordance wi

29、th MIL-STD-129 7. NOTES (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory unless otherwise stated in the contract or purchase order.) 7.1 Intended use: The undershirts are for wear by military personnel of the Department of Defense. They

30、are intended for Special Operations Forces Personal Equipment Advance Requirements (SPEAR). They are used as an insulation layer of the Extended Cold Weather Clothing System in field, combat, and operations other than war. 7.2 Acceptance criteria. Sampling for inspection shall be in accordance with

31、ANZI/ASQC Z1.4. The end items shall be examined for visual defects listed in paragraph 5.4. The lot size shall be expressed in units of undershirts. The sample unit will be one undershirt. The inspection level shall be II and the acceptable quality level (AQL), expressed in terms of defects per hund

32、red units, shall be 2.5 for major defects. The end item shall be examined for dimensional conformance in accordance with paragraph 5.5. Any dimension not within the specified tolerance shall be classified as a defect. The lot size shall be expressed in units of undershirts. The sample size shall be

33、one undershirt. The inspection level shall be S-3 and the AQL, expressed in terms of defects per hundred units, shall be 4.0. Requirements for this acceptance criteria shall be referenced in the contract or purchase order. 7.3 Government documents. 7.3.1 Specifications, standards, and handbooks. The

34、 following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents shall be those listed in the issue of the 7.3.2 Acquisition Streamlining and Standardization Information System (ASSIST) and supp

35、lement thereto, cited in the solicitation. SPECIFICATIONS Commercial Item Descriptions (CIDS) A-A-52095 -Thread, Polyester, Textured A-A-55634 - Zippers (Fasteners, Slide Interlocking) 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59358 Source

36、 of Government documents. Copies of Military and Federal documents are available from: Standardization Documents Order Desk Bldg 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 7.3.2 Other Government documents, drawings, and publications. The following Government documents, drawings, and publicati

37、ons form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those specified in the solicitation. Code of Federal Regulations (Applications for copies should be addressed to U.S. Government Printing Office, Superintendent of Documents, Mail stop: SSOP,

38、Washington, DC 20402-9328.) 7.3.3 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issue of documents which are DOD adopted shall be those in the issue of the Acquisition Streamlining and Standardization

39、 Information System (ASSIST) cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the ASISTS are the documents cited in the solicitation. AMERICAN SOCIETY FOR TESTING AND MATERIALS (For all inquires please contact the American Society for Testing and Materials

40、, 100 Barr Harbor, West Conshohocken, PA 19428-2959). Website address http:/www.astm.org ASTM D 3776 Standard Test Method for Mass Per Unit Area (Weight) of Fabric ASTM D 737 Standard Test Method for Air Permeability of Textile Fabrics ASTM D 6193 Standard Test Method for Stitches and Seams ASTM D 3

41、512 Standard Test Method for Pilling ASTM D 2594 Standard Test Method for Tension of Elastic Textiles ASTM D 3951 Standard Test Method for Commercial Packaging ASTM E 96 Standard Test Method for Water Vapor Transmission of Materials ASTM D 204 Standard Test Method for Sewing Threads AMERICAN ASSOCIA

42、TION OF TEXTILE CHEMISTS AND COLORISTS (For all inquires please contact the American Association of Textile Chemists and Colorists, P.O. Box 12215, Triangle Park, NC 27709-2215). Website address http:/www.aatcc.org AATCC TM 61 Colorfastness to Laundering, Home and Commercial: Accelerated AATCC TM 8

43、Colorfastness to Crocking: AATCC Crockmeter Method 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59358 AATCC 15 Colorfastness to Perspiration AATCC TM16 Colorfastness to Light AATCC TM 135 Dimensional Changes in Automatic Home Laundering of Wo

44、ven and Knit Fabrics ANSI/ASCQ Z1.4- Sampling Procedures and Tables for Inspection of Attributes (For all inquires please contact the American National Standards Institute, 25 West 43rdStreet, 4thFloor, New York, NY 10036). Website address http:/www.ansi.org. 7.3.4 Source of supply. Sources of sugge

45、sted supply for the Visa Polyester 1/ Milliken & Co. 920 Milliken Road Spartenburg, NC 29303 Note: The contracting officer must approve any alternate material with equivalent performance characteristics. 1/ Visa Performance Characteristics Visa is a registered trademark of Milliken & Co. Visa adds v

46、alue by offering three key benefits: 1. Moisture wicking - Visa polyester is hydrophilic. It wicks perspiration away from the skin, moving moisture to the outer surface of the garment where it evaporates. 2. Soil release - Skip the pretreatments. Visa is machine washable, releasing stubborn stains a

47、nd odors without pretreatments. 3. Prevents soil redeposition - Visa prevents dirt and oil transfer in the wash cycle. With no soil redeposition, Visa color stays bright and whites stay white wash after wash. Do not use fabric softeners on Visa polyester. Additional benefits of Visa polyester: Super

48、ior durability, Wrinkle resistance, Unbeatable color retention, Benefits wont wear or wash out. Apparel retains original weight, body and shape. MILITARY INTERESTS: Custodians: PREPARING ACTIVITY: Army - GL DLA - CT Navy - MC Project 8415-0252 CIVIL AGENCY COORDINATING ACTIVITY: GSA FSS 9Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59358 10Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-