DLA A-A-55314-1997 JERSEY REVERSIBLE《正反两面穿逆羊毛衫》.pdf

《DLA A-A-55314-1997 JERSEY REVERSIBLE《正反两面穿逆羊毛衫》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-55314-1997 JERSEY REVERSIBLE《正反两面穿逆羊毛衫》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、 A-4-55314 m 9999974 0376344 792 m I INCH-POUND I A-A-55314 December 03,1997 COMMERCIAL ITEM DESCRIPTION JERSEY, REVERSIBLE The General Service Administration has authorized the use of this commercial item description in preference to MIL-J-43967. 1. SCOPE. This commercial item description covers th

2、e requirements for a reversible jersey in two (2) types. The jersey is intended for use by personnel of the Department of Defense. 2. CLASSIFICATION 2.1 The reversible jersey shall be in the following types: a. Type I: The reversible jersey shall match Black shade number 421 on the outside and Gold

3、shade number 422 on the inside. b. Type II; The reversible jersey shall match Navy shade number 3378 on the outside and Yellow shade number 35 12 on the inside. 3. SALIENT CHARACTERISTICS 3.1 DescriDtion. The 100% cotton jersey shall be a pullover type with a collarette and short sleeves. The body o

4、f the jersey shall consist of two layers of fabric to result in a reversible style. Any commercially acceptable thread shall be used providing that it has a minimum breaking strength of 1.5 pounds when tested in accordance with ASTM D5034, The color of the thread shall approximate the Black 421 knit

5、ted cloth for Type I and Navy 3378 knitted cloth for Type II. The cloth for the body and collarette shall be a jersey knit, single or 2-ply carded cotton yarn, circular knit with a flat jersey stitch. As a alternate, the collarette shall be a rib knit cloth constructed from single or 2-ply carded co

6、tton yarn, circular, 1x1 rib knit. The basic material shall conform to the requirements in Table I. I Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Defense Personnel Support Center, Clothing and Textil

7、es Directorate, Attn.: DPSC-FNS 2800 South 20th Street, Philadelphia, PA 19145-5099. AMSC N/A FSC 8415 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55314 m 99999

8、74 OL7b345 b29 m Characteris tics Wales per inch Courses per inch Bursting strength (pounds) Weight Colorfastness: Laundering Light Perspiration A-A-55314 Physical Requirements (min) Jersey Knit Ribbed Knit Test Method 29 19 ASTM D3887 35 25 ASTM D3887 50 120 ASTM D3787 - 8 .o ASTM D3776 Grade 4 AAT

9、CC 61-TEST 3A Grade 4 AATCC 16-Option A Grade 4 AATCC 15 TABLE I. - Reauirements Crocking Dimensional stability (lengwwidth) Grade 4 AATCC 8 12.0 percent, maximum AATCC 135 11 Sizes y2 Chest Length Sleeve Armhole Length Sleeve Neck (A) (BI Underarm (C) (Flat) 0) Opening (E) Opening (F) X-Small 15 27

10、 6 8- 112 6 18 (30-32) Small 17 28 6- 112 9 7 18-112 (34-36) - Medium 19 29 6-112 10-112 7-314 19 (38-40) Large 21 30- 1/2 6- 112 10-112 7-314 20 X-Large 23 32 7-112 11 8- 1/4 20 XX-Large 25 33 7-112 11-112 8-112 20 (42-44) (46-48) (50-52) Tolerance +I- 112 +/- 1 /4 +I- 114 +I- 114 +I- 114 +I- 114 -

11、 the nearest 0.1 of an inch with jeiseys laid flat as shown ck figure 1 and 2. Shrinkage or elongation shall be reported to the nearest O. 1 of a percent. Elongation shall reported prefixed with a (-) sign. 3.2 Finished measurements and weights. The finished measurements and weights shall conform to

12、 the requirements in Tables II and III. NOTE: The sizes may be abbreviated as XSM, S, M, LG, and XXLG. B. C. D. E. armpit. Lenath. Measure on a straight line from the junction of the shoulder and collarette seams to bottom edge of jersey. Underarm sleeve length. Measure on a straight line from the j

13、unction of the bottom of the armhole and top of the side, along the bottom of the sleeve to the bottom of sleeve opening. Armhole. Measure from the junction of the shoulder and top of armhole and sleeve seams along armhole sleeve joining seam to bottom of armhole. Sleeve omning. Measure along bottom

14、 edge of sleeve from edge to folded edge. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55314 9999974 0176346 565 A-A-55314 F. Neck oDening. Neck opening shall be measured by grasping collarette at center back and center front, forming a stra

15、ight line and measuring. NOTE: Refer to Figures 1 and 2 for A, B, C, D, E, and F measurements. TABLE III. Weierht Per dozen, (min.) - 1/ Twelve jerseys of each size shall be allowed to reach equilibrium under standard conditions. Upon reaching equilibrium, each size (one dozen) shall be weighed as a

16、 unit under standard conditions and results reported to nearest 1 ounce (see 5.1). 3.3 Labels. A commercial-type label is acceptable, provided that an additional printed cloth label containing the contractors name, contract number, size and National Stock Number (NSN) is caught on the stitching of t

17、he commercial label. The commercial label shall include fiber and laundering information. The care instructions shall read as follows: CARE INSTRUCTIONS HAND OR MACHINE WASH IN COLD WATER OR WARM WATER (MAX.110“F) DO NOT BLEACH. TUMBLE DRY AT REGULAR COTTON SETTING. WASH AND DRY EACH JERSEY SEPARATE

18、LY 3.4 Labeytag. Each item shall be individually bar-coded. The bar coding element shall be a 13 digit national stock number (NSN). The bar code type shall be a medium to high code density and shall be located so that it is completely visible on the item when it is folded andor packaged as specified

19、 and so that it causes no damage to the item. 3.5 Patterns. The jersey shall be made from the contractors own patterns such that the jersey will conform to the finished measurements in Table II. 3.6 Figure. Figures 1 and 2 are furnished for information purposes only. When inconsistencies exist betwe

20、en the written commercial item description and the figures, the written commercial item description shall govern. 4. REGULATORY REQUIREMENTS. The offerorkontractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisiti

21、on Regulation (FAR). 5. QUALITY ASSURANCE PROVISIONS 5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producers own standards and quality assurance 3 Provided by IHSNot for ResaleNo reproduction or networking pe

22、rmitted without license from IHS-,-,-A-A-553L4 9999974 0376347 4TL D * A-A-55314 practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. 5.2 Warranty. The item offered shall include the standard warranty gi

23、ven to the commercial market beginning with the date of delivery of the individual items. 5.3 Visual examination. Each jersey shall be examined for the following defects: Any hole, cut, or tear; any part shaded; any spot or stain (outside); raw edges, open seams, thread ends not removed, or loose te

24、nsion resulting in loose seams; any material defects, distorted parts or poor workmanship; color not as specified; any component part omitted; label missing, incorrect, or illegible; measurement of item not as specified; bar code omitted or not readable by scanner; human-readable interpretation (HRI

25、) omitted or illegible; bar code not visible on folded, packaged item; bar code causes damage to the item; any items not packaged in accordance with the contract or purchase order. 6. Preservation, packing, and marking. The presenration, packing, and marking shall be as specified in the contract or

26、order. 7. NOTES 7.1 Source of Government documents. Copies of military and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue, Bldg. 4D Philadelphia, PA 1 9 1 1 1-5094 7.1 Source of non-Government documents ASTM Test Methods (Applications for copie

27、s should be addressed to American Society For Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1 187.) AATCC Test Method (Applications for copies should be addressed to American Association of Textile Chemists and Colorists (AATCC), PO Box 12215, Triangle Park, NC 27709-2215.) 7.2 Sta

28、ndard sample. The standard sample for shades Black 421, Gold 422, Navy 3378 and Yellow 35 12 can be acquired from the procuring activity. MILITARY INTERESTS: Custodians Navy - NU CIVIL AGENCY COORDINATING ACTNITY: GSA - FSS 1 PREPARING ACTIVITY: DLA - CT Project 84 15-0887 4 Provided by IHSNot for R

29、esaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5531 4 = 9999974 O376348 338 A-A-55314 -A - CT FIGURE 1 - JERSEY, REVERSIBLE 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-8-55314 74 O17b34 274 9 A-A-55314 B l FIGURE 2 - JERSEY, REVERSIBLE, ALTERNATE COLLARETTE Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-