DLA A-A-55057 B-2010 PANELS WOOD WOOD BASED CONSTRUCTION AND DECORATIVE.pdf

《DLA A-A-55057 B-2010 PANELS WOOD WOOD BASED CONSTRUCTION AND DECORATIVE.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-55057 B-2010 PANELS WOOD WOOD BASED CONSTRUCTION AND DECORATIVE.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5530 A-A-55057B 15 December 2010 SUPERSEDING A-A-55057A 30 December 1994 COMMERCIAL ITEM DESCRIPTION PANELS, WOOD/WOOD BASED; CONSTRUCTION AND DECORATIVE The General Services Administration has authorized the use of this Commercial Item Description for all Federal Agencies. 1. SCOPE. Th

2、is commercial item description covers generic wood and wood based panel products. 2. CLASSIFICATION. The panels shall be of the following types (see notes for typical uses of these panels): 2.1 Type A Construction and industrial plywood: Conventional plywood (laminated wood veneers) manufactured in

3、accordance with U.S. product standard PS 1, Construction and Industrial Plywood (see notes). 2.2 Type B Structural use panels: Panels manufactured in accordance with U.S. product standard PS 2, Performance Standard for Wood-Based Structural-Use Panels; Timber Engineering Company (TECO) PRP-133, Perf

4、ormance Standard and Policies for Structural-Use Panels (see notes). 2.3 Type C Hardwood and decorative plywood manufactured in accordance with Hardwood Plywood and Veneer Association (HPVA) product standard HPVA HP-1, Standard for Hardwood and Decorative Plywood (see notes). INCH-POUND Comments, su

5、ggestions, or questions on this document should be addressed to Defense Supply Center Philadelphia (DSCP), ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or e-mail to dscpg&inspecommentsdla.mil . Since contact information can change, you may want to verify the currency of this addr

6、ess information using ASSIST Online database at https:/assist.daps.dla.mil .Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55057B 2 3. SALIENT CHARACTERISTICS. 3.1 Description. Panels covered by this commercial item description shall conform to

7、the requirements of the applicable product standards as specified for Type A, Type B, or Type C panels. 3.2 Species. The species, species group, number of plies, sanding, exposure capability, span rating, core construction, grade, dimensions, and quantity as applicable shall be as specified and in a

8、ccordance with the applicable product standard (see notes). 3.3 Preservative or fire-treated panels. Preservative or fire-retardant treated panels shall be treated in accordance with the requirements of the American Wood Protection Association (AWPA) standard T1 or MIL-L-19140 as specified (see note

9、s). 3.4 Panel marking and/or certification. All panels shall be marked and/or certified as required by the applicable standard. 3.5 Workmanship. Panel shall have no defects which affect its use, appearance, or serviceability. 3.6 Metric products. Products manufactured to metric dimensions will be co

10、nsidered on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of ASTM SI 10, and all other requirements of this commercial item description are met. If a product is manufactured to me

11、tric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum exte

12、nt practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 5. PRODUCT CONFORMANCE. 5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producers own drawings, specifications, s

13、tandards, and quality assurance practices, and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance. 6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order. 7. NOTES. 7.1 Typical

14、 uses: 7.1.1 Type A Conventional laminated veneer panels have many uses including furniture, concrete forms, boats, containers, flooring, siding, sheathing, and general construction. Care should be taken by the ordering activity to specify plywood grades commensurate with their intended end-use. 7.1

15、.2 Type B - Panels are primarily intended for such uses as subflooring, roof/wall sheathing, and siding. Panels may also be suitable for use as containers. They may be made from wood veneers (not necessarily in accordance with PS 1) or reconstituted wood, e.g., oriented strand board (OSB) and may ge

16、nerally be substituted for Type A panels for these uses often at a lower price (see ordering data). 7.1.3 Type C Panels are primarily intended for use as decorative wall panels or stock panels for furniture. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IH

17、S-,-,-A-A-55057B 3 7.2 Ordering data. The contract or order should specify the following: a. Purchaser should specify the number, title, and date of this commercial item description. b. Purchaser should specify, as applicable, the species, species group, number of plies, sanding, exposure capability

18、 (e.g., interior or exterior), span rating, core construction, preservative treatment, grade, dimensions, and quantity of panels. c. When ordering Type A panels, and it has been determined that equivalent Type B panels may be substituted, it will be so stated in the contract or order. d. When orderi

19、ng preservative or fire-retardant treated panels, the type of preservative, use conditions, and type (interior or exterior) fire-retardant will be specified (see salient characteristic). Care should be taken to ensure that panels are of a type/grade compatible with desired treatment. e. Packaging re

20、quirements. 7.3 Source of documents. 7.3.1 ASTM SI10 is available from the ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 or online at http:/www.astm.org . 7.3.2 FAR. The Federal Acquisition Regulation is available from the Superintendent of Documents, U.S. Government Pr

21、inting Office, Washington, DC 20402 or online at http:/www.arnet.gov/far . 7.3.3 Government documents. Federal and military documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191

22、11-5094. 7.3.4 HPVA HP-1 is available from the Hardwood Plywood and Veneer Association, 1825 Michael Faraday Drive, P.O. Box 2789, Reston, VA 22090-2789 or at http:/www.hpva.org . 7.3.5 TECO PRP-133 is available from the Timber Engineering Company, 2902 Terra Court, Sun Prairie, WI 53590. 7.3.6 U.S.

23、 Product Standards PS 1 and PS 2 are available from the Standards Services Division, National Institute of Standards and Technology, 100 Bureau Drive, MS 2150, Gaithersburg, MD 20899-2150 or at http:/ts.nist.gov/docvps. 7.4 Key words. Fire-Retardant Treated Hardwood Laminated Veneer Particleboard Pl

24、ywood Structural-Use 7.5 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55057B

25、 4 Custodians: Preparing activty: Army AR DLA - IS Navy YD Air Force - 99 (Project 5530-2010-001) Review activities: Army EA, SM Navy MC Air Force - 84 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-