DIN EN ISO 17830-2016 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830 2016) German version EN ISO 17830 2016《固体生物燃料 芯块分裂的粒度分布(ISO 17830-2016) 德文版本EN.pdf

《DIN EN ISO 17830-2016 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830 2016) German version EN ISO 17830 2016《固体生物燃料 芯块分裂的粒度分布(ISO 17830-2016) 德文版本EN.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 17830-2016 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830 2016) German version EN ISO 17830 2016《固体生物燃料 芯块分裂的粒度分布(ISO 17830-2016) 德文版本EN.pdf（17页珍藏版）》请在麦多课文档分享上搜索。

1、November 2016 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 75.160.40!%up“2588277www.din.de

2、DIN EN ISO 17830Solid biofuels Particle size distribution of disintegrated pellets (ISO 17830:2016);English version EN ISO 17830:2016,English translation of DIN EN ISO 17830:2016-11Biogene Festbrennstoffe Partikelgrenverteilung von PelletAusgangsmaterial (ISO 17830:2016);Englische Fassung EN ISO 178

3、30:2016,Englische bersetzung von DIN EN ISO 17830:2016-11Biocombustibles solides Dtermination de la distribution granulomtrique des granuls dsintgrs (ISO 17830:2016);Version anglaise EN ISO 17830:2016,Traduction anglaise de DIN EN ISO 17830:2016-11SupersedesDIN EN 16126:201205www.beuth.deDocument co

4、mprises 17 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.11.16 DIN EN ISO 17830:2016-11 2 A comma is used as the decimal marker. National foreword This document (EN ISO 17830:2016) has been prepared by Technical Committee ISO

5、/TC 238 “Solid biofuels” in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” (Secretariat: SIS, Sweden). The responsible German body involved in its preparation was DIN-Normenausschuss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 062-05-82 AA Bio

6、gene Festbrennstoffe. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 16559 DIN EN ISO 16559 ISO 17225-2 DIN EN ISO 17225-2 ISO 17827-2 DIN EN ISO 17827-2 ISO 18134-1 DIN EN ISO 18134-1 ISO 18134-2 DIN EN ISO 18134-2 Amendments This sta

7、ndard differs from DIN EN 16126:2012-05 as follows: a) the content of EN ISO 17830 (based on EN 16126) has been adopted in full; b) the German translation of “solid biofuels” has been changed throughout the document from Feste Biobrennstoffe to Biogene Festbrennstoffe; c) references to EN Standards

8、have been partly replaced by references to the relevant ISO Standards and have been updated, e.g. in Clause 2; d) Clause 6 “Apparatus” has been revised and duplications have been removed; e) Clause 8 “Procedure” and Clause 9 “Calculation” have been revised and rendered more precise; f) Clause 11 “Te

9、st report” has been revised and supplemented by necessary data, e.g. relating to the recording of all adjustable sieving machine settings; g) the standard has been editorially revised. Previous editions DIN EN 16126: 2012-05 DIN EN ISO 17830:2016-11 3 National Annex NA (informative) Bibliography DIN

10、 EN ISO 16559, Solid biofuels Terminology, definitions and description DIN EN ISO 17225-2, Solid biofuels Fuel specifications and classes Part 2: Graded wood pellets DIN EN ISO 17827-2, Solid biofuels Determination of particle size distribution for uncompressed fuels Part 2: Vibrating screen method

11、using sieves for classification of samples with apertures of 3,15 mm and below DIN EN ISO 18134-1, Solid biofuels Determination of moisture content Oven dry method Part 1: Total moisture Reference method DIN EN ISO 18134-2, Solid biofuels Determination of moisture content Oven dry method Part 2: Tot

12、al moisture Simplified method DIN EN ISO 17830:2016-11 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17830 April 2016 ICS 75.160.10; 27.190 Supersedes EN 16126:2012English Version Solid biofuels - Particle size distribution of disintegrated pellets (ISO

13、17830:2016) Biocombustibles solides - Dtermination de la distribution granulomtrique des granuls dsintgrs (ISO 17830:2016) Biogene Festbrennstoffe - Bestimmung der Partikelgrenverteilung von Pellet-Ausgangsmaterial (ISO 17830:2016) This European Standard was approved by CEN on 20 February 2016. CEN

14、members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appli

15、cation to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Man

16、agement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

17、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marni

18、x 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17830:2016 EEuropean foreword .3Introduction 51 Scope . 62 Normative references 63 Terms and definitions . 64 Principle 65 Reagents 66 Apparatus . 77 Sa

19、mple preparation . 88 Procedure. 88.1 Disintegration 88.2 Drying . 88.3 Moisture conditioning 88.4 Sieving 99 Calculation 910 Performance characteristics . 1111 Test report 11Annex A (informative) Characteristics on determination of particle size distribution of material within pellets in accordance

20、 with the 2007 inter-comparison study 12Bibliography . 13Contents Page2DIN EN ISO 17830:2016-11 EN ISO 17830:2016 (E)Foreword .4European foreword This document (EN ISO 17830:2016) has been prepared by Technical Committee ISO/TC 238 “Solid biofuels“ in collaboration with Technical Committee CEN/TC 33

21、5 “Solid biofuels” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall be withdrawn at the latest by Oct

22、ober 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 16126:2012. According to the CEN-CENELEC Intern

23、al Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ire

24、land, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17830:2016 has been approved by CEN as EN ISO 17830:2016 without any modification. 3DIN

25、 EN ISO 17830:2016-11 EN ISO 17830:2016 (E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member

26、body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electr

27、otechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of

28、ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held r

29、esponsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information gi

30、ven for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the followi

31、ng URL: Foreword - Supplementary information.The committee responsible for this document is ISO/TC 238, Solid biofuels.4DIN EN ISO 17830:2016-11 EN ISO 17830:2016 (E)IntroductionIn power plants with powder fuel burners for energy production, the operators need information about the particle size dis

32、tribution of the fuel for optimising particle burnout during combustion. Fuel preparation equipment, such as pulverizers, are used for crushing pellets into the original particle sizes before the material was pressed into pellets. The method described in this International Standard is intended to ch

33、aracterize particle size distribution of the material contained within fuel pellets and also allows for a relative comparison of pellets of different manufacturing.This method is based on experience with pellets made from sawdust, wood shavings and milled wood, as well as straw. The method may also

34、be applicable for pellets produced from other solid biofuel materials provided that they can be dissolved into its constituents in water.Pellets that are engineered to resist water, e.g. pellets from materials which have undergone some thermal treatments, cannot be characterised by this method.5DIN

35、EN ISO 17830:2016-11 EN ISO 17830:2016 (E)1 ScopeThis International Standard aims to define the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.2 Normative referencesThe following documen

36、ts, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 16559, Solid biofuels Ter

37、minology, definitions and descriptionsISO 17827-21), Solid biofuels Determination of particle size distribution for uncompressed fuels Part 2: Vibrating screen using sieves for classification of samples with apertures of 3,15 mm and belowISO 181341, Solid biofuels Determination of moisture content O

38、ven dry method Part 1: Total moisture Reference methodEN 14778, Solid biofuels SamplingEN 14780, Solid biofuels Sample preparation3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 16559 and the following apply.3.1sieve fractionmaterial collected on a si

39、eve4 PrincipleThe particle size distribution is determined after the sample pellets have been disintegrated in hot deionised water and dried in a drying cabinet or oven. The determination is performed by sieving the dried material in accordance with ISO 17827-2.5 ReagentsDeionised water.1) To be pub

40、lished.6DIN EN ISO 17830:2016-11 EN ISO 17830:2016 (E)6 Apparatus6.1 Disintegration container, water proof container made of material such as stainless steel capable of withstanding a temperature of 100 C. The container shall be able to hold at least 2 000 ml of the deionised water and the entire te

41、st portion of pellets without spilling over during stirring.A lid or a cover, e.g. aluminium foil, shall be used to cover the container during the dissolving of the pellets in water.Volume of container should be about 5 l.6.2 Electric kettle or other suitable equipment for water heating, capable of

42、heating at least 2 000 ml of water.6.3 Drying cabinet or oven, shall be capable of maintaining a temperature of (60 5) C with at least three air exchanges per hour. The air velocity shall be such that the test sample particles are not dislodged from the drying container(s).NOTE Higher air exchange r

43、ates will shorten the drying time.6.4 Drying containers, shall consist of non-corrodible heat-resistant material such as metal, glass or porcelain and be able to hold sufficient volume to accommodate the slurry from the disintegration container.6.5 Balance, shall be capable of reading to the nearest

44、 0,01 g.6.6 Sieves, set of sieves described in ISO 17827-2 and listed in Table 1 shall be considered the default sieve set. However, other sieve sets can be used based on the specific requirements as agreed upon by the interested parties such as listed in Table 2.6.7 Weighing containers, an adequate

45、 number of weighing containers are required.The weighing of the sieved particle fractions can be performed either by weighing the remaining material directly on the tarred weighed sieves or by collecting and weighing the material in weighing containers.6.8 Spoon, shall be made of non-corrodible mate

46、rial for stirring the disintegration slurry.6.9 Mechanical sieving equipment, sieving equipment in accordance with ISO 17827-2 shall be used for determination of the particle size distribution of the disintegrated pellets and to break down agglomerates of particles formed during the drying of the sl

47、urry.Some sieving machines have adjustable parameters. The results of the sieving might differ depending on how adjustable parameters are controlled. It is therefore important, for comparative purposes, to report how the adjustable parameters have set in terms of frequency, amplitude, duration, etc.

48、 If machines have adjustable dimensionless settings, an estimate of the adjustable degree shall be recorded to the best of the ability of the operator.6.10 Flat surfaced tool, or flat brush, shall be used for stirring the dried material and for separating agglomerated particles after drying and siev

49、ing.7DIN EN ISO 17830:2016-11 EN ISO 17830:2016 (E)7 Sample preparationThe laboratory sample used for the determination of particle size of disintegrated pellets shall be obtained in accordance with EN 14778 and a test sample shall be extract using volume reduction methods in accordance with EN 14780. The recommended size of the test sample is (300 10) g.NOTE If a larger test sample is used, the amount of water, container si