DIN EN ISO 15465-2004 Pipework - Stripwound metal hoses and hose assemblies (ISO 15465 2004) German version EN ISO 15465 2004《管道工程 带绕金属软管和软管配件》.pdf

《DIN EN ISO 15465-2004 Pipework - Stripwound metal hoses and hose assemblies (ISO 15465 2004) German version EN ISO 15465 2004《管道工程 带绕金属软管和软管配件》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 15465-2004 Pipework - Stripwound metal hoses and hose assemblies (ISO 15465 2004) German version EN ISO 15465 2004《管道工程 带绕金属软管和软管配件》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 23.040.70PipeworkStripwound metal hoses and hose assemblies(ISO 15465 : 2004)English version of DIN EN ISO 15465Rohrleitungen Gewickelte Metallschluche und Metallschlauchleitungen (ISO 15465 : 2004)European Standard EN ISO 15465 : 2004 has the status of a DIN Standard.A comma is used as the deci

2、mal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 342 Metal hoses, hoseassemblies, bellow and expansion joints to adopt, without alteration, International Standard ISO 15465 asa European Standard.The responsible German body involved in its pre

3、paration was the Normenausschuss Rohrleitungen undDampfkesselanlagen (Pipelines and Boilers Standards Committee), Technical Committee Schlauch-leitungen und Kompensatoren aus Metall.The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are asfollows:ISO Sta

4、ndard DIN StandardISO 554 DIN 50014ISO 2081 DIN 50961ISO 7369 DIN EN ISO 7369*)ISO 10380 DIN EN ISO 10380DEUTSCHE NORM July 2004DIN EN ISO 15465 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin,

5、Germany,has the exclusive right of sale for German Standards (DIN-Normen).Normenausschuss Bauwesen (NABau) im DINEnglish price group 11www.din.dewww.beuth.de10.04 9578615Continued overleaf.Document comprises 16 pages.*) Currently at draft stage.Page 2DIN EN ISO 15465 : 2004-07National Annex NAStanda

6、rds referred to(and not included in Normative references)DIN 50014 Artificial climates in technical applications Standard atmospheresDIN 50961 Chromatized zinc and cadmium coatings on ferrous materialsDIN EN ISO 10380 Pipework Corrugated metal hoses and hose assemblies (ISO 10380 : 2003)English vers

7、ionICS 23.040.70Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungPipeworkStripwound metal hoses and hose assemblies(ISO 15465 : 2004) 2004. CEN All rights of exploitation in any form and by any mea

8、nsreserved worldwide for CEN national members.Ref. No. EN ISO 15465 : 2004 ETuyauteries Tuyaux et tuyauteriesmtalliques flexibles agrafs(ISO 15465 : 2004)Rohrleitungen Gewickelte Metall-schluche und Metallschlauch-leitungen (ISO 15465 : 2004)This European Standard was approved by CEN on 2004-03-01.C

9、EN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on applic

10、ation to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same sta

11、tus as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Sl

12、ovenia, Spain, Sweden, Switzerland, andthe United Kingdom.March 2004EN ISO 15465Page 2EN ISO 15465 : 2004ForewordInternational StandardISO 15465 : 2004 Pipework Stripwound metal hoses and hose assemblies,which was prepared by ISO/TC 5 Ferrous metal pipes and metallic fittings of the International Or

13、ganizationfor Standardization, has been adopted by Technical Committee CEN/TC 342 Metal hoses, hose assemblies,bellow and expansion joints, the Secretariat of which is held by Italy, as a European Standard.This European Standard shall be given the status of a national standard, either by publication

14、 of an identicaltext or by endorsement, and conflicting national standards withdrawn, by August 2004 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium,

15、 Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the I

16、nternational Standard ISO 15465 : 2004 was approved by CEN as a European Standard withoutany modification.23333345567781010101011121313131414Page 3EN ISO 15465 : 2004Page 4EN ISO 15465 : 2004Page 5EN ISO 15465 : 2004Page 6EN ISO 15465 : 2004Page 7EN ISO 15465 : 2004Page 8EN ISO 15465 : 2004Page 9EN ISO 15465 : 2004Page 10EN ISO 15465 : 2004Page 11EN ISO 15465 : 2004Page 12EN ISO 15465 : 2004Page 13EN ISO 15465 : 2004Page 14EN ISO 15465 : 2004