DIN EN ISO 11127-3-2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3 Determin.pdf

《DIN EN ISO 11127-3-2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3 Determin.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 11127-3-2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3 Determin.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、April 2012 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 2

2、5.220.10!$?1“1882814www.din.deDDIN EN ISO 11127-3Preparation of steel substrates before application of paints and relatedproducts Test methods for non-metallic blast-cleaning abrasives Part 3: Determination of apparent density (ISO 11127-3:2011)English translation of DIN EN ISO 11127-3:2012-04Vorber

3、eitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen Prfverfahren fr nichtmetallische Strahlmittel Teil 3: Bestimmung der scheinbaren Dichte (ISO 11127-3:2011)Englische bersetzung von DIN EN ISO 11127-3:2012-04Prparation des subjectiles dacier avant application de peintures et de pr

4、oduitsassimils Mthodes dessai pour abrasifs non mtalliques destins la prparation par projection Partie 3: Dtermination de la masse volumique apparente (ISO 11127-3:2011)Traduction anglaise de DIN EN ISO 11127-3:2012-04SupersedesDIN EN ISO 11127-3:1997-11www.beuth.deDocument comprises pagesIn case of

5、 doubt, the German-language original shall be considered authoritative.1103.12 DIN EN ISO 11127-3:2012-04 2 A comma is used as the decimal marker. National foreword This standard falls in the domain of Technical Committee CEN/TC 139 “Paints and varnishes” (Secretariat: DIN, Germany). It is identical

6、 with International Standard ISO 11127-3 which was prepared by Technical Committee ISO/TC 35 “Paints and varnishes”, Subcommittee SC 12 “Preparation of steel substrates before application of paints and related products” (Secretariat: BSI, United Kingdom). The responsible German body involved in its

7、preparation was the Normenausschuss Beschichtungsstoffe und Beschichtungen (Coatings and Coating Materials Standards Committee), Working Committee NA 002-00-11 AA Strahlmittel. DIN EN ISO 11127 consists of the following parts, under the general title Preparation of steel substrates before applicatio

8、n of paints and related products Test methods for non-metallic blast-cleaning abrasives: Part 1: Sampling Part 2: Determination of particle size distribution Part 3: Determination of apparent density Part 4: Assessment of hardness by a glass slide test Part 5: Determination of moisture Part 6: Deter

9、mination of water-soluble contaminants by conductivity measurement Part 7: Determination of water soluble chlorides The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 3696 DIN ISO 3696 ISO 11126-1 DIN EN ISO 11126-1 ISO 11126-3 DIN EN ISO

10、11126-3 ISO 11126-4 DIN EN ISO 11126-4 ISO 11126-5 DIN EN ISO 11126-5 ISO 11126-6 DIN EN ISO 11126-6 ISO 11126-7 DIN EN ISO 11126-7 ISO 11126-8 DIN EN ISO 11126-8 ISO 11126-9 DIN EN ISO 11126-9 ISO 11126-10 DIN EN ISO 11126-10 ISO 11127-1 DIN EN ISO 11127-1 Amendments This standard differs from DIN

11、EN ISO 11127-3:1997-11 as follows: a) in Annex A the reference to ISO 11126-2 and ISO 11127-8 has been deleted; b) the standard has been brought in line with the current presentation rules. Previous editions DIN EN ISO 11127-3: 1997-11 DIN EN ISO 11127-3:2012-04 3 National Annex NA (informative) Bib

12、liography DIN EN ISO 11126-1, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification DIN EN ISO 11126-3, Preparation of steel substrates before application of paints an

13、d related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag DIN EN ISO 11126-4, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag DIN EN ISO

14、 11126-5, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 5: Nickel refinery slag DIN EN ISO 11126-6, Preparation of steel substrates before application of paints and related products Specifications for n

15、on-metallic blast-cleaning abrasives Part 6: Iron furnace slag DIN EN ISO 11126-7, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 7: Fused aluminium oxide DIN EN ISO 11126-8, Preparation of steel substra

16、tes before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 8: Olivine sand DIN EN ISO 11126-9, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 9: S

17、taurolite DIN EN ISO 11126-10, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 10: Almandite garnet DIN EN ISO 11127-1, Preparation of steel substrates before application of paints and related products Te

18、st methods for non-metallic blast-cleaning abrasives Part 1: Sampling DIN ISO 3696, Water for analytical laboratory use Specification and test methods DIN EN ISO 11127-3:2012-04 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11127-3 December 2011 ICS 25.2

19、20.10 Supersedes EN ISO 11127-3:1997English Version Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning Prparation des subjectiles dacier avant application de peintures et de produits assimils - Mthodes dessai pour abrasifs

20、 non mtalliques destins la prparation par projection - Partie 3: Dtermination de la masse volumique apparente (ISO 11127-3:2011) Vorbereitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen - Prfverfahren fr nichtmetallische Strahlmittel - Teil 3: Bestimmung der scheinbaren Dichte (IS

21、O 11127-3:2011) This European Standard was approved by CEN on 14 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bi

22、bliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp

23、onsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, G

24、reece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Manag

25、ement Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11127-3:2011: E(ISO 11127-3:2011) abrasives - Part 3: Determination of apparent density Contents EN ISO 11127-3:2011 (E) DIN E

26、N ISO 11127-3:2012-04 2 Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definition .4 4 Reagent .4 5 Apparatus .4 6 Sampling .5 7 Procedure .5 8 Expression of results 5 9 Test report 6 Annex A (informative) International Standards for non-metallic blast-cleaning abrasives .7 Foreword

27、This document (EN ISO 11127-3:2011) has been prepared by Technical Committee ISO/TC 35 Paints and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, e

28、ither by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or

29、CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11127-3:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria

30、, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. End

31、orsement notice The text of ISO 11127-3:2011 has been approved by CEN as a EN ISO 11127-3:2011 without any modification. “ EN ISO 11127-3:2011 (E) DIN EN ISO 11127-3:2012-04 3 1 ScopeThis is one of a number of parts of ISO 11127 dealing with the sampling and testing of non-metallic abrasives for bla

32、st-cleaning.The types of non-metallic abrasive and requirements on each are contained in ISO 11126.The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A.T

33、his part of ISO 11127 specifies a method for the determination of the apparent density of non-metallic blast-cleaning abrasives.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For u

34、ndated references, the latest edition of the referenced document (including any amendments) applies.ISO 3696, Water for analytical laboratory use Specification and test methodsISO 11127-1, Preparation of steel substrates before application of paints and related products Test methods for non-metallic

35、 blast-cleaning abrasives Part 1: Sampling3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1apparent densitymass of a given volume of non-metallic abrasive, as determined by the pyknometer method described in this part of ISO 111274 Reagent4.1 Dis

36、tilled or deionized water, of at least grade 3 purity as defined in ISO 3696.5 ApparatusOrdinary laboratory apparatus and glassware, together with the following:5.1 Pyknometer, Gay-Lussac type, of capacity 50 ml, with a capillary stopper.EN ISO 11127-3:2011 (E) DIN EN ISO 11127-3:2012-04 4 5.2 Oven,

37、 capable of being maintained at a temperature of (110 5) C.5.3 Balance, capable of weighing to an accuracy of 0,01 g.5.4 Desiccator, containing a desiccant such as dried silica gel impregnated with cobalt chloride.6 SamplingTake a representative sample of the product to be tested, as described in IS

38、O 11127-1.7 Procedure7.1 Carry out the determination in duplicate.7.2 Dry a sufficient quantity of the sample by heating it at (110 5) C for 1 h. Allow to cool to room temperature in the desiccator (5.4).7.3 Weigh the clean, dry pyknometer (5.1) to an accuracy of 0,01 g (m1), introduce into it appro

39、ximately 10 g of the dried sample and reweigh (m2).7.4 Add distilled or deionized water (4.1) to the pyknometer until it is completely filled. Replace the stopper and gently shake the pyknometer to displace air adhering to the test portion. Remove the stopper, fill with water and then replace the st

40、opper, forcing excess water out through the capillary tube. Carefully dry the outside of the pyknometer. Ensure there are no air bubbles present. Reweigh the pyknometer and its contents (m3).7.5 Empty the pyknometer of water and test portion, rinsing several times to remove all traces of abrasive. R

41、efill with distilled or deionized water, replace the stopper and ensure there are no air bubbles present. Dry the outside of the pyknometer and weigh (m4).7.6 Care shall be taken that the pyknometer is handled as little as possible in order to prevent warming by hand. Pyknometer, test portion and wa

42、ter shall, as far as possible, be at the same temperature.8 Expression of resultsCalculate the apparent density, A, of the product tested, expressed in kilograms per cubic metre (kg/m3), using the equation A W=( ) ( ) m mm m m m2 14 1 3 2310wherem1is the mass, in grams, of the pyknometer;m2is the ma

43、ss, in grams, of the pyknometer and test portion;m3is the mass, in grams, of the pyknometer, test portion and water;m4is the mass, in grams, of the pyknometer and water;Wis the density, in kilograms per cubic decimetre, of water at the temperature of the determination.If the duplicate determinations

44、 differ by more than 10 % (relative to the higher result), repeat the procedure described in Clause 7.Calculate the mean of two valid determinations and report the result to the nearest 100 kg/m3.EN ISO 11127-3:2011 (E) DIN EN ISO 11127-3:2012-04 5 9 Test reportThe test report shall contain at least

45、 the following information:a) all details necessary to identify the product tested, in accordance with the appropriate part of ISO 11126 (see Annex A), if applicable;b) a reference to this part of ISO 11127 (ISO 11127-3);c) the result of the test;d) any deviation from the test method specified;e) th

46、e date of the test;f) the name of the person who carried out the test.EN ISO 11127-3:2011 (E) DIN EN ISO 11127-3:2012-04 6 Annex A (informative) International Standards for non-metallic blast-cleaning abrasivesRequirements and test methods for non-metallic blast-cleaning abrasives are contained in I

47、SO 11126 and ISO 11127, respectively.ISO 11126 consists of the following parts under the general title:Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification Part 3: Co

48、pper refinery slag Part 4: Coal furnace slag Part 5: Nickel refinery slag Part 6: Iron furnace slag Part 7: Fused aluminium oxide Part 8: Olivine sand Part 9: Staurolite Part 10: Almandite garnetISO 11127 consists of the following parts, under the general title:Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling Part