DIN EN ISO 11127-2-2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2 Determin.pdf

《DIN EN ISO 11127-2-2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2 Determin.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 11127-2-2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2 Determin.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、April 2012 Translation by DIN-Sprachendienst.English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 2

2、5.220.10!$?0“1882813www.din.deDDIN EN ISO 11127-2Preparation of steel substrates before application of paints and relatedproducts Test methods for non-metallic blast-cleaning abrasives Part 2: Determination of particle size distribution (ISO 11127-2:2011)English translation of DIN EN ISO 11127-2:201

3、2-04Vorbereitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen Prfverfahren fr nichtmetallische Strahlmittel Teil 2: Bestimmung der Korngrenverteilungen (ISO 11127-2:2011)Englische bersetzung von DIN EN ISO 11127-2:2012-04Prparation des subjectiles dacier avant application de peintu

4、res et de produitsassimils Mthodes dessai pour abrasifs non mtalliques destins la prparation par projection Partie 2: Analyse granulomtrique (ISO 11127-2:2011)Traduction anglaise de DIN EN ISO 11127-2:2012-04SupersedesDIN EN ISO 11127-2:1997-11www.beuth.deDocument comprises pagesIn case of doubt, th

5、e German-language original shall be considered authoritative.1103.12 DIN EN ISO 11127-2:2012-04 2 A comma is used as the decimal marker. National foreword This standard falls in the domain of Technical Committee CEN/TC 139 “Paints and varnishes” (Secretariat: DIN, Germany). It is identical with Inte

6、rnational Standard ISO 11127-2 which was prepared by Technical Committee ISO/TC 35 “Paints and varnishes”, Subcommittee SC 12 “Preparation of steel substrates before application of paints and related products” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparatio

7、n was the Normenausschuss Beschichtungsstoffe und Beschichtungen (Coatings and Coating Materials Standards Committee), Working Committee NA 002-00-11 AA Strahlmittel. DIN EN ISO 11127 consists of the following parts, under the general title Preparation of steel substrates before application of paint

8、s and related products Test methods for non-metallic blast-cleaning abrasives: Part 1: Sampling Part 2: Determination of particle size distribution Part 3: Determination of apparent density Part 4: Assessment of hardness by a glass slide test Part 5: Determination of moisture Part 6: Determination o

9、f water-soluble contaminants by conductivity measurement Part 7: Determination of water soluble chlorides The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 565 DIN ISO 565 ISO 11126-1 DIN EN ISO 11126-1 ISO 11126-3 DIN EN ISO 11126-3 ISO

10、11126-4 DIN EN ISO 11126-4 ISO 11126-5 DIN EN ISO 11126-5 ISO 11126-6 DIN EN ISO 11126-6 ISO 11126-7 DIN EN ISO 11126-7 ISO 11126-8 DIN EN ISO 11126-8 ISO 11126-9 DIN EN ISO 11126-9 ISO 11126-10 DIN EN ISO 11126-10 ISO 11127-1 DIN EN ISO 11127-1 Amendments This standard differs from DIN EN ISO 11127

11、-2:1997-11 as follows: a) in Annex A the reference to ISO 11126-2 and ISO 11127-8 has been deleted; b) the standard has been brought in line with the current presentation rules. Previous editions DIN EN ISO 11127-2: 1997-11 DIN EN ISO 11127-2:2012-04 3 National Annex NA (informative) Bibliography DI

12、N EN ISO 11126-1, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification DIN EN ISO 11126-3, Preparation of steel substrates before application of paints and related pr

13、oducts Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag DIN EN ISO 11126-4, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag DIN EN ISO 11126-5, Pr

14、eparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 5: Nickel refinery slag DIN EN ISO 11126-6, Preparation of steel substrates before application of paints and related products Specifications for non-metallic

15、blast-cleaning abrasives Part 6: Iron furnace slag DIN EN ISO 11126-7, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 7: Fused aluminium oxide DIN EN ISO 11126-8, Preparation of steel substrates before a

16、pplication of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 8: Olivine sand DIN EN ISO 11126-9, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 9: Staurolite DI

17、N EN ISO 11126-10, Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 10: Almandite garnet DIN EN ISO 11127-1, Preparation of steel substrates before application of paints and related products Test methods f

18、or non-metallic blast-cleaning abrasives Part 1: Sampling DIN ISO 565, Test sieves Metal wire cloth, perforated metal plate and electroformed sheet Nominal sizes of openings DIN EN ISO 11127-2:2012-04 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11127-2

19、 December 2011 ICS 25.220.10 Supersedes EN ISO 11127-2:1997English Version Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2011) Prparation de

20、s subjectiles dacier avant application de peintures et de produits assimils - Mthodes dessai pour abrasifs non mtalliques destins la prparation par projection - Partie 2: Analyse granulomtriqueVorbereitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen - Prfverfahren fr nichtmetallis

21、che Strahlmittel - Teil 2: Bestimmung der Korngrenverteilungen (ISO 11127-2:2011) This European Standard was approved by CEN on 14 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a

22、 national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German).

23、A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyp

24、rus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C

25、OMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11127-2:2011: E(ISO 11127-2:2011) Contents DIN EN ISO 11127-

26、2:2012-04 EN ISO 11127-2:2011 (E) 2 Page Foreword 3 1 Scope 4 2 Normative references 4 3 Apparatus .4 4 Sampling .5 5 Procedure .5 6 Expression of results 6 7 Test report 6 Annex A (informative) International Standards for non-metallic blast-cleaning abrasives .7 Foreword This document (EN ISO 11127

27、-2:2011) has been prepared by Technical Committee ISO/TC 35 Paints and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an

28、identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held r

29、esponsible for identifying any or all such patent rights. This document supersedes EN ISO 11127-2:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croati

30、a, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of

31、 ISO 11127-2:2011 has been approved by CEN as a EN ISO 11127-2:2011 without any modification. “ DIN EN ISO 11127-2:2012-04 EN ISO 11127-2:2011 (E) 3 1 ScopeThis is one of a number of parts of ISO 11127 dealing with the sampling and testing of non-metallic abrasives for blast-cleaning.The types of no

32、n-metallic abrasive and requirements on each are contained in ISO 11126.The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A.This part of ISO 11127 speci

33、fies a method for the determination of the particle size distribution of non-metallic blast-cleaning abrasives by sieving.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated

34、 references, the latest edition of the referenced document (including any amendments) applies.ISO 565:1990, Test sieves Metal wire cloth, perforated metal plate and electroformed sheet Nominal sizes of openingsISO 11127-1, Preparation of steel substrates before application of paints and related prod

35、ucts Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling3 ApparatusOrdinary laboratory apparatus and glassware, together with the following:3.1 Test sieves, circular, with a height of between 25 mm and 50 mm and a sieving area approximately 200 mm in diameter, made of woven metal

36、 wire cloth. The frame of the test sieves shall be made of metaI. The range of nominal mesh apertures depends on the specification for the product to be tested and shall comply with the requirements of Table 2 in ISO 565:1990, as indicated in Table 1. The sieves shall have square openings. A lid and

37、 a residue pan shall also be provided.NOTE Smaller-diameter sieves might not produce accurate separation of the sample.Sieves shall be regularly checked for calibration and freedom from retained abrasive.DIN EN ISO 11127-2:2012-04 EN ISO 11127-2:2011 (E) 4 Table 1 List of sieve mesh apertures to be

38、used(from ISO 565:1990; R20/3 and R20 sizes)mm mm mm mm0,036 0,112 0,355 1,120,040 0,125 0,400 1,250,045 0,140 0,450 1,400,050 0,160 0,500 1,600,056 0,180 0,560 1,800,063 0,200 0,630 2,000,071 0,224 0,710 2,240,080 0,250 0,800 2.500,090 0,280 0,900 2,800,100 0,315 1,00 3,153.2 Rotating sieve machine

39、, for agitating the sieves with the sample at a frequency of rotation of approximately 300 min1and provided with a timer for time periods of up to 30 min in 1 min intervals.Other sieve machines may be used provided the same results are obtained.3.3 Balance, capable of weighing to an accuracy of 0,1

40、g.4 SamplingTake a representative sample of the product to be tested, as described in ISO 11127-1.5 Procedure5.1 Carry out the determination in duplicate.5.2 Weigh out, to the nearest 0,1 g, a test portion of approximately 300 g of the sample (m0).5.3 Use all the test sieves listed against the grade

41、 under test as given in the grade and screening specification table in the appropriate part of ISO 11126 (see Annex A) or, in the case of materials not covered by ISO 11126, as otherwise agreed between the interested parties.5.4 Arrange the test sieves (3.1) with the largest-aperture sieve on the to

42、p and progress to the smallest aperture at the bottom, with a pan to catch any abrasive that falls through the finest sieve.5.5 Place the test portion in the top sieve.5.6 Place a cover over the top sieve.5.7 Place the stack of sieves with the test portion in the rotating sieve machine (3.2) and ope

43、rate the sieve machine for 15 min.5.8 Carefully remove the top sieve from the stack and transfer any retained abrasive on to the balance pan. Brush the sieve clean of any trapped abrasive and add this to the balance pan. Weigh to the nearest 0,1 g and record this result (m1). Repeat for all the siev

44、es in the stack, including the retaining pan.DIN EN ISO 11127-2:2012-04 EN ISO 11127-2:2011 (E) 5 6 Expression of resultsFor each test sieve used, and for the residue in the pan, calculate the percentage of material retained R, expressed as a percentage by mass, using the equationRmm= 10100wherem0is

45、 the mass, in grams, of the test portion;m1is the mass, in grams, of the residue on the sieve (or in the pan).If the duplicate determinations differ by more than 10 % (relative to the higher result), repeat the procedure described in Clause 5.Calculate the mean of two valid determinations and report

46、 the result to the nearest 1 %.7 Test reportThe test report shall contain at least the following information:a) all details necessary to identify the product tested, in accordance with the appropriate part of ISO 11126 (see Annex A), if applicable;b) a reference to this part of ISO 11127 (ISO 11127-

47、2);c) the result of the test;d) any deviation from the test method specified;e) the date of the test;f) the name of the person who carried out the test.DIN EN ISO 11127-2:2012-04 EN ISO 11127-2:2011 (E) 6 Annex A (informative) International Standards for non-metallic blast-cleaning abrasivesRequirem

48、ents and test methods for non-metallic blast-cleaning abrasives are contained in ISO 11126 and ISO 11127, respectively.ISO 11126 consists of the following parts under the general title:Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification Part 3: Copper refinery slag Part 4: Coal furnace slag Part 5: Nickel