DIN EN 15090-2012 Footwear for firefighters German version EN 15090 2012《防火鞋》.pdf

《DIN EN 15090-2012 Footwear for firefighters German version EN 15090 2012《防火鞋》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15090-2012 Footwear for firefighters German version EN 15090 2012《防火鞋》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、April 2012 Translation by DIN-Sprachendienst.English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、13.340.50!$:%“1882302www.din.deDDIN EN 15090Footwear for firefightersEnglish translation of DIN EN 15090:2012-04Schuhe fr die FeuerwehrEnglische bersetzung von DIN EN 15090:2012-04Chaussures pour pompiersTraduction anglaise de DIN EN 15090:2012-04SupersedesDIN EN 15090:2006-10 andDIN EN 15090 See st

3、art of applicationwww.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.Corrigendum 1:2007-073603.12 DIN EN 15090:2012-04 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 1 April

4、2012. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Persnliche Schutz-ausrst

5、ung (Personal Protective Equipment Standards Committee), Working Committee NA 075-04-01 AA Fu- und Beinschutz. Amendments This standard differs from DIN EN 15090:2006-10 and DIN EN 15090 Corrigendum 1:2007-07 as follows: a) slip resistance has been added (reference to EN ISO 20345, 5.3.5); b) the ty

6、pes of footwear for firefighters (4.3) have been changed in accordance with the risks; c) the requirements and the test method for radiant heat (6.3.2 and 7.2) have been changed; d) the requirements for resistance to chemicals (6.5) have been slightly changed; e) the requirements for high electrical

7、 resistance outsoles (6.6.4 in the old version) and the associated marking symbols in Table 9 have been removed; f) Annex B (normative) has been restructured. The criteria for the assessment of the condition of footwear have been listed separately: “Insulation against heat“, “Radiant heat” and “Flam

8、e resistance”; g) Annex D “Testing of laces” has been deleted. Previous editions DIN 4843-100: 1991-03 DIN 23329: 1970-01, 1984-10, 1990-04 DIN EN 344-2: 1996-08 DIN EN 345-2: 1996-08 DIN EN 15090: 2006-10 DIN EN 15090 Corrigendum 1: 2007-07 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15090

9、 January 2012 ICS 13.340.50 Supersedes EN 15090:2006English Version Footwear for firefighters Chaussures pour pompiers Schuhe fr die Feuerwehr This European Standard was approved by CEN on 24 September 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate th

10、e conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard

11、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nationa

12、l standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerlan

13、d, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. N

14、o. EN 15090:2012: EEN 15090:2012 (E) 2 Contents Page Foreword 4Introduction 51 Scope 62 Normative references 63 Terms and definitions .64 Classification, design and type 64.1 Classification 64.2 Design .74.3 Type .75 Sampling and conditioning .76 Requirements .86.1 Types and classifications .86.2 Ge

15、neral requirements 86.3 Thermal behaviour 136.3.1 Insulation against heat . 136.3.2 Radiant heat 146.3.3 Flame resistance . 146.4 Compression resistance of the toepuff 146.5 Resistance to chemicals 156.6 Electrical properties . 156.6.1 General . 156.6.2 Electrically insulating footwear . 156.6.3 Ant

16、istatic footwear 156.7 Outsole . 156.7.1 Cleat design . 156.7.2 Cleat height . 156.7.3 Cleat height in the waist area 156.7.4 Heel breast . 156.8 Zipper . 166.8.1 Zipper construction 166.8.2 Zipper (slide fastener) puller attachment strength 166.8.3 Zipper (slide fastener) lateral strength . 167 Tes

17、t methods . 167.1 Insulation against heat . 167.2 Radiant heat 167.3 Flame resistance test . 177.3.1 Conditioning and sampling . 177.3.2 Procedure 177.4 Compression resistance of the toepuff 187.5 Zipper . 197.5.1 Puller attachment strength 197.5.2 Lateral strength . 198 Marking 209 Information to b

18、e supplied . 219.1 General . 219.2 Antistatic footwear 229.3 Insocks . 23DIN EN 15090:2012-04 EN 15090:2012 (E) 3 Annex A (informative) Example of guidelines and considerations for performing a risk . 24A.1 General . 24A.2 General approach for conducting a risk assessment . 24A.3 Recommended factors

19、 for identifying and evaluating fire fighter risks 25A.4 Types of footwear for firefighters 26Annex B (normative) Assessment of the footwear by the laboratory during testing of thermal behaviour 28B.1 General . 28B.2 Criteria for the assessment of the state of footwear . 28Annex C (informative) Asse

20、ssment of the footwear by the wearer . 30C.1 General . 30C.2 Criteria for the assessment of the state of footwear . 30Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC . 32Bibliography 34DIN EN 15090:2012-04 EN 15090:2012 (E)

21、 4 Foreword This document (EN 15090:2012) has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at

22、the latest by July 2012, and conflicting national standards shall be withdrawn at the latest by July 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all

23、 such patent rights. This document supersedes EN 15090:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative

24、 Annex ZA, which is an integral part of this document. The main differences between this edition and EN 15090:2006 are as follows: a) Slip resistance has been added (reference to EN ISO 20345, 5.3.5). b) The types of footwear for firefighters (4.3) have been changed in accordance with the risks. c)

25、The requirements and the test method for radiant heat (6.3.2 and 7.2) have been changed. d) The requirement for resistance to chemicals (6.5) have been slightly changed. e) The requirements for high electrical resistance outsoles (6.6.4 in the old version) and the adequate Marking symbols in Table 9

26、 were removed. f) Annex B (normative) has been restructured. The criteria for the assessment of the state of footwear have been listed separately: “Insulation against heat”, “Radiant heat” and “Flame resistance”. g) Annex D Testing of laces has been deleted. According to the CEN/CENELEC Internal Reg

27、ulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, M

28、alta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 15090:2012-04 EN 15090:2012 (E) 5 Introduction The purpose of this standard is to provide minimum performance requirements and test methods for footwear for fir

29、efighters which is intended for use for fire fighting and associated activities. A risk assessment should be used to determine whether the footwear covered by this standard is suitable for the intended use for the expected exposure. Firefighters should be trained in the use, care and maintenance of

30、the footwear covered by this standard, including an understanding of its limitations. DIN EN 15090:2012-04 EN 15090:2012 (E) 6 1 Scope This European standard specifies minimum requirements and test methods for the performance of three types (see 4.3) of footwear for use by firefighters for fire supp

31、ression, general-purpose rescue, fire rescue and hazardous materials emergencies. This European standard does not cover special personal protective equipment used in high-risk situations (for example, the conditions described in ISO 15538). 2 Normative references The following referenced documents a

32、re indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13832-3:2006, Footwear protecting against chemicals Part 3: Requirements for footw

33、ear highly resistant to chemicals under laboratory conditions EN 50321, Electrically insulating footwear for working on low voltage installations EN ISO 6942:2002, Protective clothing Protection against heat and fire Method of test: Evaluation of materials and material assemblies when exposed to a s

34、ource of radiant heat (ISO 6942:2002) EN ISO 15025:2002, Protective clothing Protection against heat and flame Method of test for limited flame spread (ISO 15025:2000) EN ISO 20344:2011, Personal protective equipment Test methods for footwear EN ISO 20345:2011, Personal protective equipment Safety f

35、ootwear ISO 15538, Protective clothing for firefighters Laboratory test methods and performance requirements for protective clothing with a reflective outer surface 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 20345:2011 apply. 4 Classification

36、, design and type 4.1 Classification Footwear for firefighters shall be classified in accordance with Table 1. DIN EN 15090:2012-04 EN 15090:2012 (E) 7 Table 1 Classification of footwear Classification Description Class I Footwear made from leather and other materials, excluding all-rubber or all-po

37、lymeric footwear Class II All-rubber (i.e. entirely vulcanized) or all-polymeric (i.e. entirely moulded) footwear 4.2 Design Footwear shall conform to one of designs B to E of Figure 3 of EN ISO 20345:2011. 4.3 Type The types of footwear for firefighters shall be as follows: Type 1: Outdoor interven

38、tions, fire and wildland firefighting; no protection against penetration, no toe protection, no protection against chemical hazards; Type 2: All fire suppression and rescue interventions where protection against penetration, and toe protection are needed, no protection against chemical hazards; Type

39、 3: All fire suppression and rescue interventions where protection against penetration and toe protection are needed, including protection against chemical hazards. 5 Sampling and conditioning The minimum number of samples shall be that specified in Clause 6 of EN ISO 20344:2011, together with the m

40、inimum number of test pieces taken from each sample, as given in Table 2. Wherever possible, test pieces shall be taken from the whole footwear unless otherwise stated in this standard and in EN ISO 20344. If it is not possible to obtain a large enough test piece from the footwear, then a sample of

41、the material from which the component has been manufactured may be used instead and this shall be noted in the test report. Where samples are required from each of three sizes, these shall comprise the largest, smallest and a middle size of the footwear under test. All test pieces shall be condition

42、ed in a standard atmosphere of (23 + 2) C and (50 + 5) % relative humidity for a minimum of 48 h before testing, unless otherwise stated in the test method. The maximum time which shall elapse between removal from the conditioning atmosphere and the start of testing shall be not greater than 10 min,

43、 unless otherwise stated in the test method. Each test piece shall individually satisfy the specific requirement, unless otherwise stated in the test method. NOTE The uncertainty of measurement for each test method described in the present standard may be assessed. One of the two following approache

44、s should be used: a statistical method, e.g. that given in ISO 5725-2 20; DIN EN 15090:2012-04 EN 15090:2012 (E) 8 a mathematical method, e.g. that given in ENV 13005 3. Table 2 Minimum number of samples and test specimens or test pieces Property to be determineda Reference Number ofsamples Number o

45、f test pieces from each sample Test only on the final footwear Radiant heat 6.3.2 1 pair See 7.2 Yes Flame 6.3.3 1 pair See 7.3 Yes Compression resistance of footwear forepart 6.4 1 pair from each of three sizes 1 pair Yes Zipper puller attachment strength 6.8.2 3 zippers No Zipper lateral strength

46、6.8.3 3 zippers No a Table 1 of EN ISO 20344:2011 applies. 6 Requirements 6.1 Types and classifications The permitted combinations of types of footwear for firefighters (see 4.3) and classes I and II (see 4.1) shall be as given in Table 3. As specified in 4.2, design A shall not be used. Table 3 Rel

47、ationship between types of footwear and classes Types of footwear Class I of Table 1 Class II of Table 1 1 Possible Possible 2 ossibl Possibl3 Not possible Possible NOTE Type 3 footwear for firefighters are suitable for use with chemical protective clothing in accordance with EN 943-2, where appropriate. 6.2 General requirements Footwear for firefighters shall conform to the requirements specified in Table 4. DIN EN 15090:2012-04 EN 15090:2012 (E) 9 Table 4 General requirements Requirements Reference Type 1 Type 2 Type 3 Marking symbol EN ISO 20345:2011 EN 15090 Class Class Class II I II