DIN EN 14216-2015 Cement - Composition specifications and conformity criteria for very low heat special cements German version EN 14216 2015《水泥 超低热特种水泥的组分、规范和合格准则》.pdf

《DIN EN 14216-2015 Cement - Composition specifications and conformity criteria for very low heat special cements German version EN 14216 2015《水泥 超低热特种水泥的组分、规范和合格准则》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 14216-2015 Cement - Composition specifications and conformity criteria for very low heat special cements German version EN 14216 2015《水泥 超低热特种水泥的组分、规范和合格准则》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、September 2015 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

2、ICS 91.100.10!%F0)“2351306www.din.deDDIN EN 14216Cement Composition, specifications and conformity criteria for very low heatspecial cements;English version EN 14216:2015,English translation of DIN EN 14216:2015-09Zement Zusammensetzung, Anforderungen und Konformittskriterien von Sonderzement mit se

3、hrniedriger Hydratationswrme;Englische Fassung EN 14216:2015,Englische bersetzung von DIN EN 14216:2015-09Ciments Composition, spcifications et critres de conformit de ciments speciaux trs faiblechaleur dhydratation;Version anglaise EN 14216:2015,Traduction anglaise de DIN EN 14216:2015-09Supersedes

4、DIN EN 14216:2004-08See start of applicationwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 26 pages 08.15 DIN EN 14216:2015-09 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2

5、015-09-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further informatio

6、n, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 14216:2004-08, may be used in parallel with this standard during a specified transition period where such has been laid down in t

7、he Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14216:2015) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes” (Secretariat: NBN, Belgium). The responsible German body involved in its prepar

8、ation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-07-13 AA Zement, SpA zu Teilbereichen von CEN/TC 51 und ISO/TC 74. Amendments This standard differs from DIN EN 14216:2004-08 as follows: a) the terminology has been brought

9、in line with the Construction Products Regulation (Regulation (EU) No 305/2011); b) Subclause 7.5 “Dangerous substances” has been added; c) the former Annex A (informative) “Water-soluble hexavalent chromium” has been deleted; d) Annex ZA has been brought in line with the Construction Products Regul

10、ation (Regulation (EU) No 305/2011). Previous editions DIN EN 14216: 2004-08 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14216 July 2015 ICS 91.100.10 Supersedes EN 14216:2004English Version Cement - Composition, specifications and conformity criteria for very low heat special cements Cimen

11、ts - Composition, spcifications et critres de conformit de ciments speciaux trs faible chaleur dhydratation Zement - Zusammensetzung, Anforderungen und Konformittskriterien von Sonderzement mit sehr niedriger Hydratationswrme This European Standard was approved by CEN on 10 April 2015. CEN members a

12、re bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to

13、 the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management C

14、entre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu

15、ania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-

16、1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14216:2015 EEN 14216:2015 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Very low heat

17、special cement . 6 5 Constituents . 6 6 Composition and notation 6 7 Mechanical, physical, heat of hydration, chemical and durability requirements . 8 7.1 Mechanical requirements - Standard strength . 8 7.2 Physical requirements 8 7.2.1 Initial setting time 8 7.2.2 Soundness 8 7.2.3 Heat of hydratio

18、n . 8 7.3 Chemical requirements . 8 7.4 Durability requirements 9 7.5 Dangerous substances . 9 8 Standard designation 9 9 Conformity criteria . 10 9.1 General requirements 10 9.2 Conformity criteria for mechanical, physical and chemical properties and evaluation procedure . 11 9.2.1 General 11 9.2.2

19、 Statistical conformity criteria . 12 9.2.3 Single result conformity criteria . 14 9.3 Conformity criteria for cement composition . 15 9.4 Conformity criteria for properties of the cement constituents . 15 Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Const

20、ruction Products Regulation 16 ZA.1 Scope and relevant characteristics . 16 ZA.2 Procedure for AVCP of very low heat special cements . 18 ZA.2.1 System of AVCP . 18 ZA.2.2 Declaration of performance (DoP) . 19 ZA.2.2.1 General 19 ZA.2.2.2 Content 20 ZA.2.2.3 Example of DoP 20 ZA.3 CE marking and lab

21、elling 22 Bibliography 24 DIN EN 14216:2015-09EN 14216:2015 (E) 3 European foreword This document (EN 14216:2015) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national st

22、andard, either by publication of an identical text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights

23、. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14216:2004. Compared to the version EN 14216:2004 the following major changes have been included in this document: use of the terminology given by the Construction Products R

24、egulation (Regulation (EU) No 305/2011); a clause “Dangerous substances” has been added; the former Annex A (informative) “Water-soluble hexavalent chromium” has been deleted; Annex ZA has been revised in accordance with the Construction Products Regulation (Regulation (EU) No 305/2011). This docume

25、nt has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. The various stages in the development of a European Standard

26、 for common cement, in response to the preliminary mandate given to CEN by the EC and the EFTA, are described in EN 197-1. It is indicated that, in view of the large numbers of different cements involved, it was considered necessary to separate the “common cements“, which are now covered by EN 197-1

27、, from special cements, i.e. those with special properties or those having hardening processes not mainly dependent on the hydration of calcium silicates. The low heat property for common cements is covered by EN 197-1. A need for control of heat development during hydration of concrete is referred

28、to in EN 206. Classification of cements with respect to heat of hydration is one method whereby heat development of concrete can be controlled. The purpose of this European Standard is therefore to specify the heat of hydration for very low heat special cements. Composition and other requirements ar

29、e those specified in EN 197-1 for common cements. Conformity criteria are additionally specified. The requirements in this European Standard are based on the results of tests on cement in accordance with EN 196-1, EN 196-2, EN 196-3, EN 196-5, EN 196-7, EN 196-8 and EN 196-9. The scheme for the eval

30、uation of conformity in EN 197-2 is applicable to very low heat special cements. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republ

31、ic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN

32、 14216:2015-09EN 14216:2015 (E) 4 Introduction It is recognized that different cements have different properties and performance. Those performance tests now available (i.e. setting time, strength, soundness and heat of hydration) have been included in this European Standard. In addition, work is be

33、ing carried out by CEN/TC 51 to identify any additional tests which are needed to specify further performance characteristics of cement. Until further performance tests are available, it is highly recommended that the choice of cement, especially the type and/or strength class in relation to the req

34、uirements for durability depending on exposure class and type of construction in which it is incorporated, follows the appropriate standards and/or regulations for concrete valid in the place of use. DIN EN 14216:2015-09EN 14216:2015 (E) 5 1 Scope This European Standard defines and gives the specifi

35、cations of six distinct very low heat special cement products and their constituents. The definition of each cement includes the proportions in which the constituents are to be combined to produce these distinct products in a single strength class having a limited heat of hydration value. The defini

36、tion also includes requirements the constituents have to meet and the mechanical, physical, chemical and heat of hydration requirements for these products. This European Standard also states the conformity criteria and the related rules. Necessary durability requirements are also given. In addition

37、to the specified requirements, an exchange of additional information between the cement producer and user can be helpful. The procedures for such an exchange are not within the scope of this European Standard but should be dealt with in accordance with national standards or regulations or can be agr

38、eed between the parties concerned. NOTE 1 The word “cement“ in this European Standard is used to refer to very low heat special cement unless otherwise indicated. NOTE 2 The risk of early-age thermal cracking in concrete depends upon the properties and execution and is, therefore, also dependent on

39、factors other than the heat of hydration of the cement. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest

40、 edition of the referenced document (including any amendments) applies. EN 196-1, Methods of testing cement - Part 1: Determination of strength EN 196-2, Methods of testing cement - Part 2: Chemical analysis of cement EN 196-3, Methods of testing cement - Part 3: Determination of setting time and so

41、undness EN 196-5, Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement EN 196-7, Methods of testing cement - Part 7: Methods of taking and preparing samples of cement EN 196-8, Methods of testing cement - Part 8: Heat of hydration - Solution method EN 196-9, Methods of testin

42、g cement - Part 9: Heat of hydration - Semi-adiabatic method EN 197-1, Cement - Part 1: Composition, specifications and conformity criteria for common cements EN 197-2:2014, Cement - Part 2: Conformity evaluation 3 Terms and definitions For the purposes of this document, the terms and definitions gi

43、ven in EN 197-1 apply. DIN EN 14216:2015-09EN 14216:2015 (E) 6 4 Very low heat special cement Very low heat special cement is a hydraulic binder, i.e. a finely ground inorganic material which, when mixed with water, forms a paste which sets and hardens by means of hydration reactions and processes a

44、nd which, after hardening, retains its strength and stability even under water. It has hydration reactions and processes identical to those of common cements (see EN 197-1) but through composition, fineness or reactivity of constituents the hydration process is slower. Very low heat special cement i

45、s particularly suitable for dams and other similar massive construction, where the dimensions of the structure have a low surface/volume ratio. In this case, the dispersion of heat, developed during the hydration of the cement, is very slow and therefore it is possible to have large increases in tem

46、perature. Thermal gradients then develop between internal and external zones of the concrete setting up internal stress which can be greater than the tensile strength of the concrete and lead to cracking and breakdown. These same properties make very low heat special cement unsuitable for use in rei

47、nforced, elevated, concrete structures, e.g. bridges or buildings. NOTE Low heat common cements or low heat low early strength blastfurnace cements conforming to EN 197-1 are suitable for dams and other similar massive construction, depending on the design of the concrete and method of construction.

48、 5 Constituents The constituents of very low heat special cements shall conform to the requirements of the constituents of common cements specified in EN 197-1. 6 Composition and notation The six products in the family of very low heat special cements, covered by this European Standard, and their notation are given in Table 1. They are grouped into three main cement types as follows: VLH III Blastfurnace cement; VLH IV Pozzolanic cement; VLH V Composite cement. The composition of each of the six products in the family of very