DIN EN 12312-17-2009 Aircraft ground support equipment - Specific requirements - Part 17 Air conditioning equipment (includes Amendment A1 2009) English version of DIN EN 12312-17 .pdf

《DIN EN 12312-17-2009 Aircraft ground support equipment - Specific requirements - Part 17 Air conditioning equipment (includes Amendment A1 2009) English version of DIN EN 12312-17 .pdf》由会员分享，可在线阅读，更多相关《DIN EN 12312-17-2009 Aircraft ground support equipment - Specific requirements - Part 17 Air conditioning equipment (includes Amendment A1 2009) English version of DIN EN 12312-17 .pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、August 2009DEUTSCHE NORM English price group 11No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 49.100!$Y=“1542658www.d

2、in.deDDIN EN 12312-17Aircraft ground support equipment Specific requirements Part 17: Air conditioning equipment (includes Amendment A1:2009)English version of DIN EN 12312-17:2009-08Luftfahrt-Bodengerte Besondere Anforderungen Teil 17: Klimatisierungsanlagen (enthlt nderung A1:2009)Englische Fassun

3、g DIN EN 12312-17:2009-08SupersedesDIN EN 12312-17:2004-10See start of validitywww.beuth.deDocument comprises 20 pagesDIN EN 12312-17:2009-08 2 Start of validity This standard takes effect on 1 August 2009. DIN EN 12312-17:2004-10 may be used in parallel until 28 December 2009. National foreword Thi

4、s standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 274 “Aircraft ground support equipment” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Luft- und Raumfahrt (Aerospace Standards Committ

5、ee), Technical Committee NA 131-08-02 AA Bodengerte. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC (valid until 28 December 2009), and the “revised Machinery Directive”, Directive 2006/42/EC, which takes e

6、ffect on 29 December 2009, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the Europ

7、ean Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). DIN EN 12312 consists of the following parts, under the general title Aircraft ground support equipmen

8、t Specific requirements: Part 1: Passenger stairs Part 2: Catering vehicles Part 3: Conveyor belt vehicles Part 4: Passenger boarding bridges Part 5: Aircraft fuelling equipment Part 6: Deicers and deicing/antiicing equipment Part 7: Aircraft movement equipment Part 8: Maintenance stairs and platfor

9、ms Part 9: Container/Pallet loaders Part 10: Container/Pallet transfer transporters Part 11: Container/Pallet dollies and loose load trailers Part 12: Potable water service equipment Part 13: Lavatory service equipment Part 14: Disabled/Incapacitated passenger boarding equipment Part 15: Baggage and

10、 equipment tractors Part 16: Air start equipment Part 17: Air conditioning equipment Part 18: Nitrogen or Oxygen units Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions Part 20: Ground power equipment DIN EN 12312-17:2009-08 3 General requirements for aircraft ground support equipmen

11、t are covered by the DIN EN 1915 series of standards, under the general title Aircraft ground support equipment General requirements: Part 1: Basic safety requirements Part 2: Stability and strength requirements, calculations and test methods Part 3: Vibration measurement methods and reduction Part

12、4: Noise measurement methods and reduction Amendments This standard differs from DIN EN 12312-17:2004-10 as follows: a) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by Directive 98/79/ EC” has been updated. b) An

13、nex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been added. Previous editions DIN EN 12312-17: 2004-10 DIN EN 12312-17:2009-08 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1231

14、2-17:2004+A1 April 2009 ICS 49.100 Supersedes EN 12312-17:2004English Version Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment Matriel au sol pour aronefs - Exigences particulires - Partie 17: Matriels de climatisation Luftfahrt-Bodengerte - Besondere A

15、nforderungen - Teil 17: Klimatisierungsanlagen This European Standard was approved by CEN on 6 May 2004 and includes Amendment 1 approved by CEN on 1 March 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

16、 the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, G

17、erman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czec

18、h Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EURO

19、PEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12312-17:2004+A1:2009: EEN 12312-17:2004+A1:2009 (E) Contents Page Forewo

20、rd3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 List of hazards6 5 Safety requirements and/or measures 6 5.1 General requirements6 5.2 Electrical power supplies7 5.3 Air delivery hoses and couplers 7 5.4 Fixed equipment 7 5.5 Controls, monitoring devices and displ

21、ays 7 6 Information for use 8 6.1 Marking .8 6.2 Safety signs8 6.3 Instructions 8 7 Verification of requirements.9 Annex A (informative) Examples of air conditioning equipment 10 Annex B (normative) List of hazards in addition to those of EN 1915-1 12 Annex ZA (informative) Relationship between this

22、 European Standard and the Essential Requirements of EU Directive Machinery 98/37/EC, amended by Directive 98/79/EC14 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“.15 Bibliography16 DIN EN 12312-17:2009-08 2 EN 12312-17

23、:2004+A1:2009 (E) Foreword This document (EN 12312-17:2004+A1:2009) has been prepared by Technical Committee CEN/TC 274 “Aircraft ground support equipment“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an i

24、dentical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2009-03-01. This document supersedes EN 12312-17:2004. The start and finish of text introduced

25、or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). !For relationship with EU Directives, see informative

26、Annexes ZA and ZB, which are integral parts of this document.“ The Parts of EN 12312 Aircraft ground support equipment Specific requirements are: Part 1: Passenger stairs Part 2: Catering vehicles Part 3: Conveyor belt vehicles Part 4: Passenger boarding bridges Part 5: Aircraft fuelling equipment P

27、art 6: Deicers and deicing/antiicing equipment Part 7: Aircraft movement equipment Part 8: Maintenance stairs and platforms Part 9: Container/Pallet loaders Part 10: Container/Pallet transfer transporters Part 11: Container/Pallet dollies and loose load trailers Part 12: Potable water service equipm

28、ent Part 13: Lavatory service equipment Part 14: Disabled/Incapacitated passenger boarding equipment Part 15: Baggage and equipment tractors Part 16: Air start equipment Part 17: Air conditioning equipment Part 18: Nitrogen or Oxygen units Part 19: Aircraft jacks, axle jacks and hydraulic tail stanc

29、hions Part 20: Ground power equipment According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gree

30、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 12312-17:2009-08 3 EN 12312-17:2004+A1:2009 (E) Introduction This document specifies health and safety

31、 requirements, as well as some functional and performance requirements for air conditioning equipment intended to be used for all aircraft types commonly in service in civil air transport. The minimum essential criteria are considered to be of primary importance in providing safe, serviceable, econo

32、mical and practical air conditioning equipment. Deviations from the recommended criteria should occur only after careful consideration, extensive testing, risk assessment and thorough service evaluation have shown alternative methods or conditions to be satisfactory. This document is a Type C standa

33、rd as stated in !EN ISO 12100“. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those, which are stated in type A or B standards, the provision

34、s of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. DIN EN 12312-17:2009-08 4 EN 12312-17:2004+A1:2009 (E) 1 Scope This document specifies the technical requirements

35、to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of specific air conditioning equipment for aircraft ground support, when carried out in accordance with the specifications given by the manufacturer or his authorised repre-sentative. It al

36、so takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This document is not dealing with the hazards of air conditioning machinery itself, but with the equipment

37、for the specific application of such machinery as aircraft ground support equipment. This document applies to all types of moveable air conditioning equipment with evaporators for cooling, heating and ventilating the interior of civil aircraft from outside (ground air conditioning). Examples see Ann

38、ex A. It also applies to air conditioning units and accessories, e.g. hoses, couplers, mounted on moveable parts of passenger boarding bridges and/or moveable parts of fixed centralized aircraft air conditioning equipment, whether passenger boarding bridge mounted or ramp integrated. This document d

39、oes not establish requirements for noise and vibration Noise and vibration are dealt with respectively in !EN 1915-4“ and !EN 1915-3“. This document is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron. This Part of EN 12312 is not applicable to air co

40、nditioning equipment, which is manufactured before the date of publication of this standard by CEN. !This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehi-cles) and EN 1915-4.“ 2 Normative references The following referenced documents are indispen

41、sable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ !EN 779“, Particulate air filters for general ventilation Determination of the fi

42、ltration performance EN 1050:1996, Safety of machinery Principles for risk assessment !deleted text“ EN 1915-1:2001, Aircraft ground support equipment General requirements Part 1: Basic safety requirements !EN 1915-2“, Aircraft ground support equipment General requirements Part 2: Stability and stre

43、ngth requirements, calculations and test methods !EN 1915-3, Aircraft ground support equipment General requirements Part 3: Vibration measurement methods and reduction“ !EN 1915-4, Aircraft ground support equipment General requirements Part 4: Noise measurement methods and reduction“ !EN ISO 12100-1

44、:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003)“ DIN EN 12312-17:2009-08 5 EN 12312-17:2004+A1:2009 (E) !EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Techni-cal princi

45、ples (ISO 12100-2:2003)“ !EN ISO 13850:2008, Safety of machinery Emergency stop Principles for design (ISO 13850:2006)“ !EN ISO 13857, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)“ !ISO 1034“, Aircraft Ground air-conditioning co

46、nnections 3 Terms and definitions For the purposes of this document, the terms and definitions given in !EN ISO 12100:2003“, EN 1915-1:2001 and the following apply. 3.1 air conditioning equipment ground support equipment (GSE) designed for cooling, heating and/or ventilating the interior of aircraft

47、 3.2 air conditioning unit self-contained air conditioning equipment 3.3 air delivery hose flexible device to deliver air from the air conditioning equipment to the aircraft. This device includes any coupler 3.4 coupler device to connect air delivery hoses to the aircraft and/or to other hoses also

48、known as adaptor, nozzle or connector 4 List of hazards The list of risks and hazards (see Annex B) is based on EN 1050:1996 and contains the hazards and hazardous situations, as far as they are dealt with in this document, identified by risk assessment as significant for air condi-tioning equipment

49、 and which require action to eliminate or reduce risks. 5 Safety requirements and/or measures 5.1 General requirements 5.1.1 !Air conditioning equipment shall conform to the relevant requirements of EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4 unless otherwise specified in this standard.“ It shall also conform to the specific requirements of this standard. 5.1.2 Stability and strength calculations shall be carried out in accordance with !EN 1915-2“. 5.1.3 The overall