CAN CSA-C13256-2-2001 Water-source heat pumps - Testing and rating for performance - Part 2 Water-to-water and brine-to-water heat pumps (First Edition).pdf

《CAN CSA-C13256-2-2001 Water-source heat pumps - Testing and rating for performance - Part 2 Water-to-water and brine-to-water heat pumps (First Edition).pdf》由会员分享，可在线阅读，更多相关《CAN CSA-C13256-2-2001 Water-source heat pumps - Testing and rating for performance - Part 2 Water-to-water and brine-to-water heat pumps (First Edition).pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、. .I 7 National Standard of Canada CANADIAN STANDARDS CAN/CSA-C13256-2-01 ASSOCIATION International Standard IS0 13256-2: 1998 (fi this remains the continuing responsibility of the accredited standards-development organization. Those who have a need to apply standards are encouraged to use National

2、Standards of Canada whenever practicable. These standards are subject to periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility for approving National Standards of Canada rests with the Standards Council of Canada

3、 270 Albert Street, Suite 200 Ottawa, Ontario, Kl P 6N7 Canada Les normes nationales du Canada sont publiees en versions fraqaise et anglaise. Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users to

4、 judge its suitability for their particular purpose. Registered trade-mark of Canadian Standards Association Standards Update ServiceCAN/CSA-C13256-2-01June 2001Title: Water-source heat pumps Testing and rating for performance Part 2: Water-to-water and brine-to-water heatpumpsPagination: 24 pages,

5、(CSA/1-CSA/3, i-iv, and 17 text)To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2012262.If you require assistance, please e-mail techsupportcsagroup.org

6、or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.CAN/CSA-C73256-2-07 Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps CAlV/CSA-Cl3256-2-01 Wuter-source

7、 heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps CSA Preface This is the first edition of CSA Standard CAN/GA-Cl 3256-2, Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps, which i

8、s an adoption, with Canadian deviations, of the identically titled IS0 (International Organization for Standardization) Standard 13256-2:1998 (first edition, 1998-08-l 5). It is one of two Standards that establish performance testing and rating criteria for factory-made residential, commercial and i

9、ndustrial, electrically driven, mechanical compression type heat pumps. The other Standard in the series is IS0 13256-1, Water-source heat pumps - Testing and rating for performance - Part 7: Water-to-air and brine-to-air heat pumps, which has been adopted as CAN/CSA-C13256-l-01. These two standards

10、 together supersede CANKSA-C446-94, Performance of Ground Source Heut Pumps, and CANKSA-C655-M91, Performance Standard for lnternul Water-Loop Heat Pumps. This Standard was reviewed for Canadian adoption by the CSA Subcommittee on Internal Water Loop Heat Pumps under the jurisdiction of the CSA Tech

11、nical Committee on Heating, Ventilation, and Air Conditioning Equipment and the Strategic Steering Committee on Performance, Energy Efficiency, and Renewables, and has been approved by the Technical Committee. A list of the members of the Technical Committee is available upon request. This Standard

12、has been approved as a National Standard of Canada by the Standards Council of Canada. lune 200 7 0 Canadian Standards Association - 2007 All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. IS0 material is reprinted

13、 with permission. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada”. Inquiries regarding this National Standard of Canada should be addressed to Canadian Standards Association 7 78 Rexdale Boulevard, Toronto, Ontario, C

14、anada MPW 7 R3 7-800-463-6727.476-747-4044 www.csa.ca june 200 7 0 Canadian Standards Association GSA/1 CAN/CSA-Cl3256-2-O 1 Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps CSA Foreword The Canadian Standards Association (CSA) devel

15、ops standards under the name Canadian Standards Association, and provides certification and testing under the name CSA International. CSA International provides certification services for manufacturers who, under license from CSA, wish to use the appropriate registered CSA Marks on certain products

16、of their manufacture to indicate conformity with CSA Standards. CSA Certification for a number of products is provided in the interest of maintaining agreed-upon standards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable, certification may form the basis fo

17、r acceptance by inspection authorities responsible for enforcement of regulations. Where feasible, programs will be developed for additional products for which certification is desired by producers, consumers, or other interests. In performing its functions in accordance with its objectives, CSA doe

18、s not assume or undertake to discharge any responsibility of the manufacturer or any other party. The opinions and findings of the Association represent its professional judgement given with due consideration to the necessary limitations of practical operation and state of the art at the time the St

19、andard is processed. Products in substantial accord with this Standard but which exhibit a minor difference or a new feature may be deemed to meet the Standard providing the feature or difference is found acceptable utilizing appropriate CSA International Operating Procedures. Products that comply w

20、ith this Standard shall not be certified if they are found to have additional features which are inconsistent with the intent of this Standard. Products shall not be certifiable if they are discovered to contravene applicable laws or regulations. Testing techniques, test procedures, and instrumentat

21、ion frequently must be prescribed by CSA International in addition to the technical requirements contained in Standards of CSA. In addition to markings specified in the Standard, CSA International may require special cautions, markings, and instructions that are not specified by the Standard. Some t

22、ests required by CSA Standards may be inherently hazardous. The Association neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed, whether performed in whole or in part by the manufacturer or the Association, and w

23、hether or not any equipment, facility, or personnel for or in connection with the test is furnished by the manufacturer or the Association. Manufacturers should note that, in the event of the failure of CSA International to resolve an issue arising from the interpretation of requirements, there is a

24、n appeal procedure: the complainant should submit the matter, in writing, to the Secretary of the Canadian Standards Association. If this Standard is to be used in obtaining CSA Certification please remember, when making application for certification, to request all current Amendments, Bulletins, No

25、tices, and Technical Information Letters that may be applicable and for which there may be a nominal charge. For such information or for further information concerning CSA Certification, please address your inquiry to Applications and Customer Service, CSA International, 178 Rexdale Boulevard, Toron

26、to, Ontario, Canada M9W 1 R3. CSA/Z 0 Canadian Standards Association June 200 7 CANKSA-Cl3256-2-O 1 Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps Canadian Deviations 3.8 Replace the term “energy efficiency ratio (EER)” in the titl

27、e of Clause 3.8 and throughout the Standard with the term “Coefficient for performance for cooling (COP,)“. 3.9 Replace the term “coefficient of performance (COP)” in the title of Clause 3.9 and throughout the Standard with the term “Coefficient for performance for heating (COP,)“. june 200 7 0 Cana

28、dian Standards Association CSA/3 INTERNATIONAL STANDARD IS0 13256-2 First edition 1998-08-15 Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps Pompes B chaleur B eau - Essais et dktermination des caractkristiques de performance - Part

29、ie 2: Pompes B chaleur eau-eau et eau glycoke-eau Reference number IS0 13256-2: 1998(E) IS0 13256-2:1998(E) Contents Scope . Normative reference . Definitions . Rating and test conditions 4.1 Rating conditions for the determination of capacity 4.2 Standard rating and part-load rating test conditions

30、 . Performance requirements 5.1 General 5.2 Maximum operating conditions test 5.3 Minimum operating conditions test . 5.4 Enclosure sweat test . Test methods 6.1 General 6.2 Uncertainties of measurement . 6.3 Data to be recorded . 6.4 Test tolerances . 6.5 Test results . Marking provisions . 7.1 Nam

31、eplate requirement . 7.2 Nameplate information 7.3 Designation of capacity ratings 7.4 Refrigerant designation . Publication of ratings . 8.1 Standard ratings . 8.2 Application ratings . Annex A: Test procedures Annex 6: Liquid enthalpy test method . Annex C: Instrumentation and measurements Annex D

32、: Bibliography Page 1 I 1 3 3 5 6 6 6 7 7 9 9 9 9 9 10 11 11 11 11 11 12 12 12 13 14 15 17 0 IS0 1998 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, Including photocopying and microfilm

33、, without permission in writing from the publisher. International Organization for Standardization Case postale 56 l CH-1211 Geneve 20 l Switzerland Internet isoiso.ch ii 0 IS0 IS0 13256-2:1998(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national

34、 standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internationa

35、l organizations, governmental and non- governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft international Standards adopted by the technical committee

36、s are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. This part of IS0 13256 was developed by IS0 Technical Committee TC 86, Refrigeration, Subcommittee SC 6, Testing and rating of air-condit

37、ioners and heat pumps. IS0 13256 consists of the following parts, under the general title Wafer- source heat pumps - Tesfing and rating for performance: - Part 7: Wafer-to-air and brine-to-air heat pumps - Part 2: Water-to-wafer and brine-to-wafer heat pumps Annexes A and B form an integral part of

38、this part of IS0 13256. Annexes C and D are for information only. . III IS0 13256-2:1998(E) IS0 Introduction This part of IS0 13256 covers heating and cooling systems which are generally referred to as “water-source heat pumps.” These systems generally include an indoor coil with air-moving means, a

39、 compressor, and a refrigerant-to-water or refrigerant-to-brine heat exchanger. A system may provide both heating and cooling, cooling-only, or heating-only functions. iv INTERNATIONAL STANDARD o ISO IS0 13256-2:1998(E) Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-

40、water and brine-to-water heat pumps 1 Scope 1.1 This part of IS0 13256 establishes performance testing and rating criteria for factory-made residential, commercial and industrial, electrically driven, mechanical-compression type, water-to-water and brine-to-water heat pumps. The requirements for tes

41、ting and rating contained in this part of IS0 13256 are based on the use of matched assemblies. 1.2 Equipment designed for rating at one application under this part of IS0 13256 may not be suitable for rating at all applications covered in this part of IS0 13256. 1.3 This part of IS0 13256 does not

42、apply to the testing and rating of individual assemblies for separate use or to units having two or more indoor sections connected to a single outdoor section. It does not apply to heat pumps covered in IS0 5151, IS0 13253 or lSO13256-1. NOTE - For the purpose of the remaining clauses, the terms “eq

43、uipment” or “heat pump” may be used to mean “water-to- water heat pumps” or brine-to-water heat pumps”, and the term “liquid” refers to either “water” or “brine.” 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this par

44、t of IS0 13256. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this part of IS0 13256 are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of

45、IEC and IS0 maintain registers of currently valid International Standards. IS0 817:-V, Refrigerants - Number designation. 3 Definitions For the purposes of this part of IS0 13256, the following definitions apply. 3.1 water-to-water and brine-to-water heat pump heat pump which consists of one or more

46、 factory-made assemblies which normally include an indoor-side refrigerant-to-water heat exchanger, compressor(s), and an outdoor-side refrigerant-to-water or refrigerant-to-brine heat exchanger(s), including means to indirectly provide both cooling and heating, cooling-only, or heating-only functio

47、ns NOTES 1 When such equipment is provided in more than one assembly, the separated assemblies should be designed to be used together. 2 Such equipment may also provide functions for sanitary water heating. 1) To be published. (Revision of IS0 817:1974) 1 IS0 13256-2:1998(E) IS0 3.1.1 water-loop-hea

48、t pump application water-to-water heat pump using liquid circulating in a common piping loop functioning as a heat source/heat sink NOTE - The temperature of the liquid loop is usually mechanically controlled within a temperature range of 15 “C to 40 “C 3.1.2 ground-water heat pump application water

49、-to-water heat pump using water pumped from a well, lake or stream functioning as a heat source/heat sink NOTE - The temperature of the water is related to the climatic conditions and may vary from 5 “C to 25 “C for deep wells. 3.1.3 ground-loop heat pump application brine-to-water heat pump using a brine solution circulating through a subsurface piping loop functioning as a heat source/heat sink NOTES 1 The heat exchange loop may be placed in horizontal trenches or vertical bores, or be submerged in a body of surface water. 2 The temperature of the brine is related to the climat