BS ISO IEC 29341-28-10-2017 Information technology UPnP Device Architecture Multiscreen device control protocol Application management service《信息技术 UPnP设备体系结构 多屏幕设备控制协议 应用管理服务》.pdf

《BS ISO IEC 29341-28-10-2017 Information technology UPnP Device Architecture Multiscreen device control protocol Application management service《信息技术 UPnP设备体系结构 多屏幕设备控制协议 应用管理服务》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 29341-28-10-2017 Information technology UPnP Device Architecture Multiscreen device control protocol Application management service《信息技术 UPnP设备体系结构 多屏幕设备控制协议 应用管理服务》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、Information technology UPnP Device ArchitecturePart 28-10: Multiscreen device control protocol Application management serviceBS ISO/IEC 29341-28-10:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology UPnP Device Architecture Part 28-10: Multisc

2、reen device control protocol Application management serviceTechnologies de linformation Architecture de dispositif UPnP Partie 28-10: Protocole de contrle de dispositif multi-cran Service de gestion des applicationsINTERNATIONAL STANDARDISO/IEC 29341-28-10Reference numberISO/IEC 29341-28-10:2017(E)F

3、irst edition2017-09 ISO/IEC 2017National forewordThis British Standard is the UK implementation of ISO/IEC 29341-28-10:2017.The UK participation in its preparation was entrusted to Technical Committee ICT/-/1, Information systems co-ordination.A list of organizations represented on this committee ca

4、n be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90898 9ICS 35.200Complian

5、ce with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO/IEC 293412810:20

6、17Information technology UPnP Device Architecture Part 28-10: Multiscreen device control protocol Application management serviceTechnologies de linformation Architecture de dispositif UPnP Partie 28-10: Protocole de contrle de dispositif multi-cran Service de gestion des applicationsINTERNATIONAL ST

7、ANDARDISO/IEC 29341-28-10Reference numberISO/IEC 29341-28-10:2017(E)First edition2017-09 ISO/IEC 2017BS ISO/IEC 293412810:2017ii ISO/IEC 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publica

8、tion may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country

9、 of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 29341-28-10:2017(E)BS ISO/IEC 293412810:2017ii ISO/IEC 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Pu

10、blished in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permi

11、ssion can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 29341-28-10:2017(E)ISO/IEC 293

12、41-28-10:2017(E) ISO/IEC 2017 All rights reserved iii CONTENTS Foreword . v 1 Scope 1 2 Normative references . 1 3 Terms, definitions, symbols and abbreviations 2 3.1.1 SECURITY feature 2 3.1.2 AM Roles 2 3.1.3 Application 2 3.1.4 Native Application . 2 3.1.5 Web Application 2 4 Notations and Conven

13、tions 2 5 Service Modelling Definitions . 2 5.1 Service Type 2 5.2 Key Concepts . 2 5.2.1 SECURITY feature 2 5.3 State Variables . 4 5.3.1 A_ARG_TYPE_AppIDs 4 5.3.2 AppInfoList . 5 5.3.3 A_ARG_TYPE_AppInfo . 7 5.3.4 SupportedTargetFields 8 5.3.5 A_ARG_TYPE_Target . 8 5.3.6 A_ARG_TYPE_TargetFields 8

14、5.3.7 RunningAppList . 8 5.3.8 A_ARG_TYPE_URI . 8 5.3.9 A_ARG_TYPE_Parameters . 8 5.4 Eventing and Moderation 9 5.5 Actions . 9 5.5.1 GetAppInfoByIDs() . 10 5.5.2 GetSupportedTargetFields() . 10 5.5.3 GetAppIDList() . 11 5.5.4 GetRunningAppList() 12 5.5.5 GetRunningStatus() 12 5.5.6 StartAppByID() .

15、 13 5.5.7 StartAppbyURI() . 14 5.5.8 StopApp() 15 5.5.9 GetAppConnectionInfo() . 16 5.5.10 Non-Standard Actions Implemented by a UPnP Vendor . 17 5.5.11 Common Error Codes . 17 6 XML Service Description . 17 7 Test . 21 Table 1 Error Codes for Action Level Access 3 Table 2 ApplicationManagement Role

16、s . 3 Table 3 Action to Role Permission Mapping 4 BS ISO/IEC 293412810:2017ISO/IEC 29341-28-10:2017(E) iv ISO/IEC 2017 All rights reserved Table 4 State variables . 4 Table 5 Allowed values for function element . 6 Table 6 Allowed values for connectionAddress element 6 Table 7 Required fields for Su

17、pportedTargetFields . 8 Table 8 Event moderation 9 Table 9 Actions . 9 Table 10 Arguments for GetAppInfoByIDs() . 10 Table 11 Error Codes for GetAppInfoByIDs() . 10 Table 12 Arguments for GetSupportedTargetFields() . 11 Table 13 Error Codes for GetSupportedTargetFields() . 11 Table 14 Arguments for

18、GetAppIDList() . 11 Table 15 Error Codes for GetAppIDList() . 11 Table 16 Arguments for GetRunningAppList() 12 Table 17 Error Codes for GetRunningAppList() 12 Table 18 Arguments for GetRunningStatus() . 12 Table 19 Error Codes for GetRunningStatus() . 13 Table 20 Arguments for StartAppByID() . 13 Ta

19、ble 21 Error Codes for StartAppByID() . 13 Table 22 Arguments for StartAppByURI() 14 Table 23 Error Codes for StartAppByURI() 15 Table 24 Arguments for StopApp() 15 Table 25 Error Codes for StopApp() 16 Table 26 Arguments for GetAppConnectionInfo() . 16 Table 27 Error Codes for GetAppConnectionInfo(

20、) . 16 Table 28 Common Error Codes . 17 BS ISO/IEC 293412810:2017ISO/IEC 29341-28-10:2017(E) iv ISO/IEC 2017 All rights reserved Table 4 State variables . 4 Table 5 Allowed values for function element . 6 Table 6 Allowed values for connectionAddress element 6 Table 7 Required fields for SupportedTar

21、getFields . 8 Table 8 Event moderation 9 Table 9 Actions . 9 Table 10 Arguments for GetAppInfoByIDs() . 10 Table 11 Error Codes for GetAppInfoByIDs() . 10 Table 12 Arguments for GetSupportedTargetFields() . 11 Table 13 Error Codes for GetSupportedTargetFields() . 11 Table 14 Arguments for GetAppIDLi

22、st() . 11 Table 15 Error Codes for GetAppIDList() . 11 Table 16 Arguments for GetRunningAppList() 12 Table 17 Error Codes for GetRunningAppList() 12 Table 18 Arguments for GetRunningStatus() . 12 Table 19 Error Codes for GetRunningStatus() . 13 Table 20 Arguments for StartAppByID() . 13 Table 21 Err

23、or Codes for StartAppByID() . 13 Table 22 Arguments for StartAppByURI() 14 Table 23 Error Codes for StartAppByURI() 15 Table 24 Arguments for StopApp() 15 Table 25 Error Codes for StopApp() 16 Table 26 Arguments for GetAppConnectionInfo() . 16 Table 27 Error Codes for GetAppConnectionInfo() . 16 Tab

24、le 28 Common Error Codes . 17 ISO/IEC 29341-28-10:2017(E) ISO/IEC 2017 All rights reserved v Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are m

25、embers of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international

26、organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further m

27、aintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives).

28、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in th

29、e Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of Standard, the meaning of the I

30、SO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary information ISO/IEC 293412810 was prepared by UPnP Forum and adopted, under the

31、 PAS procedure, by joint technical committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. The list of all currently available parts of ISO/IEC 29341 series, under the general title Information technology UPnP Device Architecture, can be foun

32、d on the ISO web site. BS ISO/IEC 293412810:2017ISO/IEC 29341-28-10:2017(E) vi ISO/IEC 2017 All rights reserved Introduction ISO and IEC draw attention to the fact that it is claimed that compliance with this document may involve the use of patents as indicated below. ISO and IEC take no position co

33、ncerning the evidence, validity and scope of these patent rights. The holders of -these patent rights have assured ISO and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement

34、s of the holders of these patent rights are registered with ISO and IEC. Intel Corporation has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Intel Corporation Standards Licensing Department 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsbo

35、ro, Oregon 97124 Microsoft Corporation has informed IEC and ISO that it has patent applications or granted patents as listed below: 6101499 / US; 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft Corporation

36、 One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 5

37、24 /US Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US

38、; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US Information may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained

39、 from: Digital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administration

40、 Building, Bantian Longgang District Shenzhen China 518129 Qualcomm Incorporated has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and

41、 ISO that it has patent applications or granted patents. Information may be obtained from: Telecom Italia S.p.A. Via Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc. 170

42、West Tasman Drive San Jose, CA USA 95134 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. BS ISO/IEC 2934128

43、10:2017ISO/IEC 29341-28-10:2017(E) viii ISO/IEC 2017 All rights reserved Original UPnP Document Reference may be made in this document to original UPnP documents. These references are retained in order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementer

44、s Corporation and later by UPnP Forum. The following table indicates the original UPnP document titles and the corresponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture 1.0 ISO/IEC 29341-1:2008 UPnP Device Architecture Version 1.0 ISO/IEC 29341-1:2011 UPnP

45、Device Architecture 1.1 ISO/IEC 29341-1-1:2011 UPnP Device Architecture 2.0 ISO/IEC 29341-1-2 UPnP Basic:1 Device ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2008 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2011 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service

46、 ISO/IEC 29341-3-11 UPnP ContentDirectory:1 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Service ISO/IEC 29341-3-13 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaRenderer:2 Device ISO/IEC 29341-3-2:2011 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:2 Service ISO/IEC 29

47、341-4-10:2008 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2011 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2008 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2011 UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13:2008 UPnP Rendering

48、Control:2 Service ISO/IEC 29341-4-13:2011 UPnP ScheduledRecording:1 ISO/IEC 29341-4-14 UPnP ScheduledRecording:2 ISO/IEC 29341-4-14:2011 UPnP MediaRenderer:2 Device ISO/IEC 29341-4-2 UPnP MediaServer:2 Device ISO/IEC 29341-4-3 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2008 UPnP AV Datastruc

49、ture Template:1 ISO/IEC 29341-4-4:2011 UPnP DigitalSecurityCamera:1 Device ISO/IEC 29341-5-1 UPnP DigitalSecurityCameraMotionImage:1 Service ISO/IEC 29341-5-10 UPnP DigitalSecurityCameraSettings:1 Service ISO/IEC 29341-5-11 UPnP DigitalSecurityCameraStillImage:1 Service ISO/IEC 29341-5-12 UPnP HVAC_System:1 Device ISO/IEC 29341-6-1 UPnP ControlValve:1 Service ISO/IEC 29