BS ISO 3166-3-2013 Codes for the representation of names of countries and their subdivisions Code for formerly used names of countries《国家及其地区名的表示代码 国家曾用名代码》.pdf

《BS ISO 3166-3-2013 Codes for the representation of names of countries and their subdivisions Code for formerly used names of countries《国家及其地区名的表示代码 国家曾用名代码》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 3166-3-2013 Codes for the representation of names of countries and their subdivisions Code for formerly used names of countries《国家及其地区名的表示代码 国家曾用名代码》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO 3166-3:2013Codes for the representationof names of countries and theirsubdivisionsPart 3: Code for formerly used names ofcountriesBS ISO 3166-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 3166-3:2013. Itsupersedes BS ISO

2、 3166-3:1999 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee IDT/2/11, Coding of country names and related entities.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to inc

3、lude all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 82199 8ICS 01.140.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This Brit

4、ish Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2013.Amendments issued since publicationDate Text affectedBS ISO 3166-3:2013Reference numberNumro de rfrenceISO 3166-3:2013(E/F)ISO 2013INTERNATIONAL STANDARD NORME INTERNATIONALE ISO3166-3Sec

5、ond editionDeuxime dition2013-11-15Codes for the representation of names of countries and their subdivisions Part 3: Code for formerly used names of countries Codes pour la reprsentation des noms de pays et de leurs subdivisions Partie 3: Code pour les noms de pays antrieurement utiliss BS ISO 3166-

6、3:2013ISO 3166-3:2013(E/F) COPYRIGHT PROTECTED DOCUMENT DOCUMENT PROTG PAR COPYRIGHT ISO 20#13 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, witho

7、ut permission in writing from either ISO at the address below or ISOs member body in the country of the requester. / Droits de reproduction rservs. Sauf prescription diffrente, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lec

8、tronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lISO ladresse ci-aprs ou du comit membre de lISO dans le pays du deman-deur. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.o

9、rg Published in Switzerland/Publi en Suisse ii ISO 2013 All rights reserved/Tous droits rservsBS ISO 3166-3:2013ISO 3166-3:2013(E/F) ISO 2013 All rights reserved/Tous droits rservs iiiContents Page Foreword . v Introduction . ix 1 Scope . 1 2 Normative references . 1 3 Terms and definitions . 2 4 Pr

10、inciples for inclusion in the list of formerly used country names 3 4.2 Categorization of reasons for inclusion 34.1 Source of the list . 3 4.3 Provisions for sequencing within the list 44.4 Specification for use . 44.5 User allocation 4 5 Principles for allocation of code elements for formerly used

11、 country names 5 5.2 List of formerly used country names 7 5.1 Structure of code elements for formerly used country names . 56 Maintenance . 7 7 Guidelines for users . 8 7.2 Advice regarding use 8 7.1 Special provisions 88 List of formerly used country names in English with their code elements . 9 9

12、 List of formerly used country names in French with their code elements 11 BS ISO 3166-3:2013ISO 3166-3:2013(E/F) iv ISO 2013 All rights reserved/Tous droits rservsSommaire Page Avant-propos vii Introduction x 1 Domaine dapplication 1 2 Rfrences normatives 1 3 Termes et dfinitions . 2 4 Principes di

13、nclusion dans la liste des noms de pays antrieurement utiliss 3 4.2 Classification des raisons motivant linclusion 34.1 Source de la liste . 3 4.3 Dispositions relatives lordre de la liste . 44.4 Spcification demploi 44.5 Attribution par les utilisateurs 4 5 Principes dattribution des codets aux nom

14、s de pays antrieurement utiliss 5 5.2 Liste des noms de pays antrieurement utiliss . 7 5.1 Structure des codets des noms de pays antrieurement utiliss 56 Mise jour . 7 7 Principes directeurs pour les utilisateurs 8 7.2 Conseil pour lapplication . 8 7.1 Dispositions particulires . 88 Liste des noms d

15、e pays antrieurement utiliss en anglais avec leurs codets . 9 9 Liste des noms de pays antrieurement utiliss en franais avec leurs codets . 11 BS ISO 3166-3:2013ISO 3166-3:2013(E/F) ISO 2013 All rights reserved/Tous droits rservs vForeword ISO (the International Organization for Standardization) is

16、a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represent

17、ed on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internatio-nal Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop

18、 this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IE

19、C Directives, Part 2. www.iso.org/directives Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the devel

20、opment of the document will be in the Introduction and/or on the ISO list of pa-tent declarations received. www.iso.org/patents Any trade name used in this document is information given for the convenience of users and does not consti-tute an endorsement. The committee responsible for this document

21、is ISO/TC 46, Information and documentation. ISO 3166 consists of the following parts, under the general title Codes for the representation of names of countries and their subdivisions: Part 1: Country codes Part 2: Country subdivision code Part 3: Code for formerly used names of countries ISO 3166

22、was first published in 1974. It was prepared by Technical Committee ISO/TC 46, Information and doc-umentation, in collaboration with the following International Organizations: Customs Cooperation Council (CCC), since 1995: World Customs Organization (WCO), United Nations Economic Commission for Euro

23、pe (ECE), Food and Agriculture Organization of the United Nations (FAO), International Atomic Energy Agency (IAEA), In-ternational Air Transport Association (IATA), International Chamber of Commerce (ICC), International Chamber of Shipping (ICS), International Federation of Library Associations (IFL

24、A), International Labour Office (ILO), In-ternational Telecommunication Union (ITU), International Union of Railways (UIC), United Nations Organization (UN), United Nations Conference on Trade and Development (UNCTAD), Universal Postal Union (UPU), World Intellectual Property Organization (WIPO), an

25、d World Health Organization (WHO). The International Standard was previously published in 1974, 1981, 1988 and 1993 as ISO 3166. In 1997, it was split into three parts. The first edition of the Part 3 was ISO 3166-3:1999. The first edition of Part 3, ISO 3166-3:1999, included all country names that

26、had been removed from the original 1974 version of ISO 3166 and its subsequent 1981, 1988, 1993, 1997. The present,second edition of Part 3, ISO 3166-3:2013, cancels and replaces ISO 3166-3:1999 of which it is a minor revision. It comprises a consolidation of all changes to the lists of ISO 3166-3:1

27、999 agreed by the BS ISO 3166-3:2013ISO 3166-3:2013(E/F) vi ISO 2013 All rights reserved/Tous droits rservsISO 3166/MA1),1 published in the ISO 3166-3 Newsletters I-1 to I-6. This minor revision incorporates the follo-wing changes: in Clause 6, the generic function (update, publish) has replaced men

28、tion of the tool (newsletter) for updates to codes; in 7.2, it is clearly stated that the set of codes in 7.1.3 is not administered, nor maintained by the ISO 3166/MA. This second edition is simultaneously published with the third edition of the Part 1, ISO 3166-1:2013, and the third edition of Part

29、 2, ISO 3166-2:2013. 1)1ISO 3166 Maintenance Agency Secretariat (ISO 3166/MAS). Telephone: + 41 22 749 01 11 Fax: + 41 22 733 34 30 e-mail: mbinfoiso.org Web: www.iso.org/iso/country_codes Postal adress: ISO 3166 Maintenance Agency c/o International Organization for Standardization 1 chemin de la Vo

30、ie-Creuse Case postale 56 CH-1211 Genve 20 SuisseBS ISO 3166-3:2013ISO 3166-3:2013(E/F) ISO 2013 All rights reserved/Tous droits rservs viiAvant-propos LISO (Organisation internationale de normalisation) est une fdration mondiale dorganismes nationaux de normalisation (comits membres de lISO). Llabo

31、ration des Normes internationales est en gnral confie aux comits techniques de lISO. Chaque comit membre intress par une tude a le droit de faire partie du comit technique cr cet effet. Les organisations internationales, gouvernementales et non gouvernemen-tales, en liaison avec lISO participent gal

32、ement aux travaux. LISO collabore troitement avec la Commis-sion lectrotechnique internationale (CEI) en ce qui concerne la normalisation lectrotechnique. Les procdures utilises pour laborer le prsent document et celles destines sa mise jour sont dcrites dans les Directives ISO/CEI, Partie 1. Il con

33、vient, en particulier de prendre note des diffrents critres dap-probation requis pour les diffrents types de documents ISO. Le prsent document a t rdig conform-ment aux rgles de rdaction donnes dans les Directives ISO/CEI, Partie 2, www.iso.org/directives. Lattention est appele sur le fait que certa

34、ins des lments du prsent document peuvent faire lobjet de droits de proprit intellectuelle ou de droits analogues. LISO ne saurait tre tenue pour responsable de ne pas avoir identifi de tels droits de proprit et averti de leur existence. Les dtails concernant les rfrences aux droits de proprit intel

35、lectuelle ou autres droits analogues identifis lors de llaboration du document sont indiqus dans lIntroduction et/ou sur la liste ISO des dclarations de brevets reues, www.iso.org/patents. Les ventuelles appellations commerciales utilises dans le prsent document sont donnes pour information lintenti

36、on des utilisateurs et ne constituent pas une approbation ou une recommandation. Le comit charg de llaboration du prsent document est lISO/TC 46, Information et documentation. LISO 3166 comprend les parties suivantes, prsentes sous le titre gnral, Codes pour la reprsentation des noms de pays et de l

37、eurs subdivisions: Partie 1: Codes de pays Partie 2: Code pour les subdivisions de pays Partie 3: Code pour les noms de pays antrieurement utiliss LISO 3166 a t publie pour la premire fois en 1974. Elle a t labore par le comit technique ISO/TC 46, Information et documentation, avec la collaboration

38、des Organisations internationales suivantes: Bureau interna-tional du travail (BIT), Conseil de coopration douanire (CCD) depuis 1995, Organisation mondiale des douanes (OMD), Chambre de commerce internationale (CCI), Comit conomique pour lEurope des Nations Unies (CEE), Organisation des Nations Uni

39、es pour lalimentation et lagriculture (FAO), Fdration internationale des associations de bibliothcaires (IFLA), Agence internationale de lnergie atomique (IAEA), Association du transport arien international (IATA), Chambre internationale de la marine marchande (ICS), Organisation mon-diale de la pro

40、prit intellectuelle (OMPI), Organisation mondiale de la sant (OMS), Organisation des Nations Unies (ONU), Confrence des Nations Unies sur le commerce et le dveloppement (UNCTAD), Union interna-tionale des chemins de fer (UIC), Union internationale des tlcommunications (UIT), Union postale universell

41、e (UPU). La Norme internationale tait auparavant publie en 1974, 1981, 1988 et 1993 en tant quISO 3166. En 1997, elle a t divise en trois parties. La premire dition de la partie 3 tait lISO 3166-3:1999. La premire dition de la partie 3, lISO 3166-3:1999, comprenait tous les noms de pays supprims de

42、la premire dition de lISO 3166 de 1974 et des ditions successives de 1981, 1988, 1993, 1997. BS ISO 3166-3:2013ISO 3166-3:2013(E/F) viii ISO 2013 All rights reserved/Tous droits rservsants: La prsente deuxime dition de la partie 3, ISO 3166-3:2013, annule et remplace lISO 3166-3:1999, dont elle cons

43、titue une rvision mineure, et comprend une consolidation de tous les changements accepts par lAutorit de mise jour de lISO 3166/MA1, et publis dans les bulletins I-1 I-6 de lISO 3166-3. Cette rvision mi-neure inclut les changements suiv dans lArticle 6, la fonction gnrique (mettre jour, publier) a r

44、emplac la mention doutil (bulletin) pour mettre jour les codets; en 7.2, il est clairement tabli que les ensembles de codets en 7.1.3 ne sont ni administrs, ni mainte-nus par lISO 3166/MA. Cette deuxime dition est publie simultanment avec la troisime dition de la Partie 1, ISO 3166-1:2013 et avec la

45、 troisime dition de la partie 2, ISO 3166-2:2013. 1Secrtariat de lAutorit de mise jour de lISO 3166 (ISO 3166/MAS). Tlphone: + 41 22 749 01 11 Tlfax: + 41 22 733 34 30 Adresse lectronique: mbinfoiso.org Web: www.iso.org/iso/country_codes Adresse postale: Autorit de mise jour de lISO 3166 c/o Interna

46、tional Organization for Standardization 1 chemin de la Voie-Creuse Case postale 56 CH-1211 Genve 20 Suisse BS ISO 3166-3:2013ISO 3166-3:2013(E/F) ISO 2013 All rights reserved/Tous droits rservs ixIntroduction ISO 3166 provides universally applicable coded representations of names of countries (curre

47、nt and non-current), dependencies, and other areas of particular geopolitical interest and their subdivisions. ISO 3166-1 establishes codes that represent the current names of countries, dependencies, and other areas of particular geopolitical interest, on the basis of lists of country names obtaine

48、d from the United Nations. ISO 3166-2 establishes a code that represents the names of the principal administrative divisions, or similar areas, of the countries etc. included in this part of ISO 3166. This part, ISO 3166-3, establishes a code that represents non-current country names, i.e. the country names deleted from ISO 3166 since its first publication in 1974. The three parts of ISO 3166 do not express any opinion whatsoever concerning the legal status of any coun-try, dependency, or other area named herein, or