BS ISO 13675-2013 Heating systems in buildings Method and design for calculation of the system energy performance Combustion systems (boilers)《建筑物内供暖系统 系统能效的计算方法和设计燃烧系统(锅炉)》.pdf

《BS ISO 13675-2013 Heating systems in buildings Method and design for calculation of the system energy performance Combustion systems (boilers)《建筑物内供暖系统 系统能效的计算方法和设计燃烧系统(锅炉)》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 13675-2013 Heating systems in buildings Method and design for calculation of the system energy performance Combustion systems (boilers)《建筑物内供暖系统 系统能效的计算方法和设计燃烧系统(锅炉)》.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO 13675:2013Heating systems in buildings Method and design forcalculation of the systemenergy performance Combustion systems (boilers)Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or netw

2、orking permitted without license from IHS-,-,-BS ISO 13675:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 13675:2013.The UK participation in its preparation was entrusted to TechnicalCommittee RHE/2, Ventilation for buildings, heating and hot waterservice

3、s.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI Standa

4、rdsLimited 2014ISBN 978 0 580 74028 2ICS 91.040.01; 91.140.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2014.Amendments issued since publicationDa

5、te Text affectedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 13675:2013 ISO 2013Heating systems in buildings Method and design for calculation of the system

6、 energy performance Combustion systems (boilers)Systmes de chauffage dans les btiments Mthode de conception et de calcul de la performance nergtique des systmes Systmes de combustion (chaudires)INTERNATIONAL STANDARDISO13675First edition2013-11-15Reference numberISO 13675:2013(E)Copyright British St

7、andards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 13675:2013ISO 13675:2013(E)ii ISO 2013 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2013All rights reserved. Unless otherwis

8、e specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address belo

9、w or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandCopyright British Standards Institution Provided by IHS under license with BSI - Uncontr

10、olled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 13675:2013ISO 13675:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms, definitions and symbols 13.1 Terms and definitions . 13.2

11、 Symbols and units 44 Alignment of the parts of the heating system standards 54.1 Physical factors taken into account . 54.2 Input quantities from other parts of the heating system standards . 64.3 Output quantities for other parts of the heating system standards 64.4 Heat balance of the generation

12、sub-system, including control of heat generation 74.5 Generation sub-system basic energy balance 85 Generation sub-system calculation . 95.1 Available methodologies. 95.2 Boiler efficiency . 10Annex A (informative) Additional formulas and default values for parametering the boiler efficiency method

13、.19Annex B (informative) General part default values and information .31Annex C (normative) Maximum heating power in the building zone 32Annex D (informative) Calculation examples for modulating condensing boiler 35Annex E (informative) Generation sub-systems and gross calorific values 39Bibliograph

14、y .43Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 13675:2013ISO 13675:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide

15、 federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that

16、committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this documen

17、t and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives,

18、 Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development

19、of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specifi

20、c terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 205, Building environm

21、ent design.iv ISO 2013 All rights reservedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 13675:2013ISO 13675:2013(E)IntroductionThis International Standard pr

22、esents methods for calculation of the energy losses of a heat generation system. The calculation is based on the performance characteristics of the products given in product standards and on other characteristics required to evaluate the performance of the products as included in the system.This met

23、hod can be used for the following applications: judging compliance with regulations expressed in terms of energy targets; optimization of the energy performance of a planned heat generation system, by applying the method to several possible options; assessing the effect of possible energy conservati

24、on measures on an existing heat generation system, by calculating the energy use with and without the energy conservation measure.Refer to other International Standards or to regional or national documents for input data and detailed calculation procedures not provided by this International Standard

25、.Heating systems also include the effect of attached systems such as hot water production systems.This International Standard is a systems standards, i.e. it is based on requirements addressed to the system as a whole and not dealing with requirements to the products within the system.Where possible

26、, reference is made to applicable product standards. However, use of products complying with relevant product standards is no guarantee of compliance with the system requirements.The requirements are mainly expressed as functional requirements, i.e. requirements dealing with the function of the syst

27、em and not specifying shape, material, dimensions or the like.Heating systems and cooling systems differ globally due to climate, traditions and national regulations. In some cases, requirements are given as classes so national or individual needs can be accommodated. ISO 2013 All rights reserved vC

28、opyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 13675:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not

29、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 13675:2013Heating systems in buildings Method and design for calculation of the system energy performance Combustion systems (boilers)1 ScopeThis International Standard is the general standard on generation by com

30、bustion sub-systems (boilers) for oil, gas, coal and biomass burning.It specifies the required inputs, calculation method, and resulting outputsfor space heating generation by combustion sub-systems (boilers) including control.This International Standard is also intended for the case of generation f

31、or both domestic hot water production and space heating.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest

32、edition of the referenced document (including any amendments) applies.ISO 7345:1987, Thermal insulation Physical quantities and definitionsISO 13790, Energy performance of buildings Calculation of energy use for space heating and cooling3 Terms, definitions and symbols3.1 Terms and definitionsFor th

33、e purposes of this document, the terms and definitions given in ISO 7345:1987 and the following apply.3.1.1auxiliary energyelectrical energy used by technical building systems for heating, cooling, ventilation and/or domestic water to support energy transformation to satisfy energy needsNote 1 to en

34、try: This includes energy for fans, pumps, electronics, etc. Electrical energy input to the ventilation system for air transport and heat recovery is not considered as auxiliary energy, but as energy use for ventilation.3.1.2boilergas, liquid or solid fuelled appliance designed to provide hot water

35、for space heatingNote 1 to entry: It can also be designed to provide domestic hot water heating.INTERNATIONAL STANDARD ISO 13675:2013(E) ISO 2013 All rights reserved 1Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or n

36、etworking permitted without license from IHS-,-,-BS ISO 13675:2013ISO 13675:2013(E)3.1.3biomass boilerbiomass fuelled appliance designed to provide heating medium (e.g. water, fluid)3.1.4condensing boileroil or gas boiler designed to make use of the latent heat released by condensation of water vapo

37、ur in the combustion flue productsNote 1 to entry: A condensing boiler allows the condensate to leave the heat exchanger in liquid form by way of a condensate drain.Note 2 to entry: Boilers not so designed, or without the means to remove the condensate in liquid form, are called non-condensing.3.1.5

38、low temperature boilernon-condensing boiler which can work continuously with a water supply temperature of 35 C to 40 C3.1.6modulating boilerboiler with the capability to vary continuously (from a set minimum to a set maximum) the fuel burning rate whilst maintaining continuous burner firing3.1.7mul

39、tistage boilerboiler with the capability to vary the fuel burning rate stepwise whilst maintaining continuous burner firing3.1.8on/off boilerboiler without the capability to vary the fuel burning rate whilst maintaining continuous burner firingNote 1 to entry: This includes boilers with alternative

40、burning rates set once only at the time of installation, referred to as range rating.3.1.9calculation periodperiod of time over which the calculation is performedNote 1 to entry: The calculation period can be divided into a number of calculation steps.3.1.10calculation stepdiscrete time interval for

41、 the calculation of the energy needs and uses for heating, cooling, humidification and dehumidificationNote 1 to entry: Typical discrete time intervals are one hour, one month or one heating and/or cooling season, operating modes, and bins.3.1.11combustion powerproduct of the fuel flow rate and the

42、net calorific power of the fuel3.1.12domestic hot water heatingprocess of heat supply to raise the temperature of cold water to the intended delivery temperature2 ISO 2013 All rights reservedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for Re

43、saleNo reproduction or networking permitted without license from IHS-,-,-BS ISO 13675:2013ISO 13675:2013(E)3.1.13external temperaturetemperature of external airNote 1 to entry: For transmission heat transfer calculations, the radiant temperature of the external environment is supposedly equal to the

44、 external air temperature; long-wave transmission to the sky is calculated separately.Note 2 to entry: The measurement of external air temperature is defined in ISO 159273.3.1.14gross calorific valuequantity of heat released by a unit quantity of fuel, when it is burned completely with oxygen at a c

45、onstant pressure equal to 101 320 Pa, and when the products of combustion are returned to ambient temperatureNote 1 to entry: This quantity includes the latent heat of condensation of any water vapour contained in the fuel and of the water vapour formed by the combustion of any hydrogen contained in

46、 the fuel.Note 2 to entry: According to ISO 13602-22, the gross calorific value is preferred to the net calorific value.3.1.15heat recoveryheat generated by a technical building system or linked to a building use (e.g. domestic hot water) which is utilized directly in the related system to lower the

47、 heat input and which would otherwise be wastedEXAMPLE Preheating of combustion air by a flue gas heat exchanger.3.1.16heat transfer coefficientfactor of proportionality of heat flow governed by a temperature difference between two environments3.1.17heated spaceroom or enclosure which for the purpos

48、es of the calculation is assumed to be heated to a given set-point temperature or set-point temperatures3.1.18load factorratio between the time with the boiler on and the total generator operation time3.1.19modes of operationvarious modes in which the heating system can operateEXAMPLE Set-point mode, cut-off mode, reduced mode, set-back mode, boost mode.3.1.20net calorific valuegross calorific value minus latent heat of condensation of the water vapour in the products of combustion at ambient temperature3.1.21operation cycletime period