BS EN 62196-2-2017 Plugs socket-outlets vehicle connectors and vehicle inlets Conductive charging of electric vehicles Dimensional compatibility and interchangeability requirements.pdf

《BS EN 62196-2-2017 Plugs socket-outlets vehicle connectors and vehicle inlets Conductive charging of electric vehicles Dimensional compatibility and interchangeability requirements.pdf》由会员分享，可在线阅读，更多相关《BS EN 62196-2-2017 Plugs socket-outlets vehicle connectors and vehicle inlets Conductive charging of electric vehicles Dimensional compatibility and interchangeability requirements.pdf（68页珍藏版）》请在麦多课文档分享上搜索。

1、Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehiclesPart 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessoriesBS EN 62196-2:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05

2、/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62196-2 April 2017 ICS 29.120.30; 43.120 Supersedes EN 62196-2:2012 English Version Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and intercha

3、ngeability requirements for a.c. pin and contact-tube accessories (IEC 62196-2:2016) Fiches, socles de prise de courant, prises mobiles de vhicule et socles de connecteurs de vhicule - Charge conductive des vhicules lectriques - Partie 2: Exigences dimensionnelles de compatibilit et dinterchangeabil

4、it pour les appareils broches et alvoles pour courant alternatif (IEC 62196-2:2016) Stecker, Steckdosen, Fahrzeugkupplungen und Fahrzeugstecker - Konduktives Laden von Elektrofahrzeugen - Teil 2: Anforderungen und Hauptmae fr die Kompatibilitt und Austauschbarkeit von Stift- und Buchsensteckvorricht

5、ungen fr Wechselstrom (IEC 62196-2:2016) This European Standard was approved by CENELEC on 2016-03-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterati

6、on. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language mad

7、e by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech R

8、epublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Unite

9、d Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means re

10、served worldwide for CENELEC Members. Ref. No. EN 62196-2:2017 E National forewordThis British Standard is the UK implementation of EN 62196-2:2017. It is identical to IEC 62196-2:2016. It supersedes BS EN 62196-2:2012+A12:2014, which is withdrawn.The UK participation in its preparation was entruste

11、d by Technical Committee PEL/23, Electrical accessories, to Subcommittee PEL/23/4, Protected type plugs and sockets.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contrac

12、t. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 87759 9ICS 43.120; 29.120.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under th

13、e authority of the Standards Policy and Strategy Committee on 31 May 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 621962:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62196-2 April 2017 ICS 29.120.30; 43.120 Supersedes EN 62196-2:2012 English

14、Version Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories (IEC 62196-2:2016) Fiches, socles de prise de courant, prises mobiles de v

15、hicule et socles de connecteurs de vhicule - Charge conductive des vhicules lectriques - Partie 2: Exigences dimensionnelles de compatibilit et dinterchangeabilit pour les appareils broches et alvoles pour courant alternatif (IEC 62196-2:2016) Stecker, Steckdosen, Fahrzeugkupplungen und Fahrzeugstec

16、ker - Konduktives Laden von Elektrofahrzeugen - Teil 2: Anforderungen und Hauptmae fr die Kompatibilitt und Austauschbarkeit von Stift- und Buchsensteckvorrichtungen fr Wechselstrom (IEC 62196-2:2016) This European Standard was approved by CENELEC on 2016-03-24. CENELEC members are bound to comply w

17、ith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Man

18、agement Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has th

19、e same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia

20、, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr El

21、ektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62196-2:2017 E BS EN 621962:2017EN 62196-2:2017 2 European foreword The text of document 2

22、3H/324/CDV, future edition 2 of IEC 62196-2, prepared by SC 23H “Plugs, socket-outlets and couplers for industrial and similar applications, and for electric vehicles“, of IEC/TC 23 “Electrical accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62196-2:2017. Th

23、e following dates are fixed: latest date by which the document has to be implemented atnational level by publication of an identical nationalstandard or by endorsement(dop) 2017-10-28 latest date by which the national standards conflicting withthe document have to be withdrawn(dow) 2020-04-28 Attent

24、ion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission

25、and the European Free Trade Association, and supports essential requirements of EU Directive(s). Endorsement notice The text of the International Standard IEC 62196-2:2016 was approved by CENELEC as a European Standard without any modification. BS EN 621962:2017EN 62196-2:2017 2 European foreword Th

26、e text of document 23H/324/CDV, future edition 2 of IEC 62196-2, prepared by SC 23H “Plugs, socket-outlets and couplers for industrial and similar applications, and for electric vehicles“, of IEC/TC 23 “Electrical accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as

27、 EN 62196-2:2017. The following dates are fixed: latest date by which the document has to be implemented atnational level by publication of an identical nationalstandard or by endorsement(dop) 2017-10-28 latest date by which the national standards conflicting withthe document have to be withdrawn(do

28、w) 2020-04-28 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the

29、European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). Endorsement notice The text of the International Standard IEC 62196-2:2016 was approved by CENELEC as a European Standard without any modification. EN 62196-2:2017 3 Annex ZA (normati

30、ve) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated

31、 references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Stan

32、dards listed in this annex is available here: www.cenelec.eu. Annex ZA of Part 1 applies. Addition Publication Year Title EN/HD Year IEC 62196-1 (mod) 2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements EN 62196-

33、1 2014 BS EN 621962:2017This page deliberately left blank 2 IEC 62196-2:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Terms and definitions 8 4 General . 8 5 Ratings 8 6 Connection between the power supply and the electric vehicle . 8 7 Classification of

34、accessories 10 8 Marking . 11 9 Dimensions . 11 10 Protection against electric shock 12 11 Size and colour of protective earthing conductors . 12 12 Provision for earthing . 12 13 Terminals 12 14 Interlocks 12 15 Resistance to ageing of rubber and thermoplastic material . 12 16 General construction

35、12 17 Construction of socket-outlets 12 18 Construction of plugs and vehicle connectors . 12 19 Construction of vehicle inlets . 12 20 Degrees of protection 13 21 Insulation resistance and dielectric strength . 13 22 Breaking capacity 13 23 Normal operation . 13 24 Temperature rise . 13 25 Flexible

36、cables and their connection . 13 26 Mechanical strength . 13 27 Screws, current-carrying parts and connections 13 28 Creepage distances, clearances and distances 13 29 Resistance to heat, to fire and to tracking . 13 30 Corrosion and resistance to rusting 13 31 Conditional short-circuit current with

37、stand test . 14 32 Electromagnetic compatibility (EMC) 14 33 Vehicle driveover . 14 201 Components 14 202 Resistor coding 15 STANDARD SHEETS 16 CONFIGURATION TYPE 1 . 16 CONFIGURATION TYPE 2 . 28 CONFIGURATION TYPE 3 . 43 2 IEC 62196-2:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2

38、 Normative references. 7 3 Terms and definitions 8 4 General . 8 5 Ratings 8 6 Connection between the power supply and the electric vehicle . 8 7 Classification of accessories 10 8 Marking . 11 9 Dimensions . 11 10 Protection against electric shock 12 11 Size and colour of protective earthing conduc

39、tors . 12 12 Provision for earthing . 12 13 Terminals 12 14 Interlocks 12 15 Resistance to ageing of rubber and thermoplastic material . 12 16 General construction 12 17 Construction of socket-outlets 12 18 Construction of plugs and vehicle connectors . 12 19 Construction of vehicle inlets . 12 20 D

40、egrees of protection 13 21 Insulation resistance and dielectric strength . 13 22 Breaking capacity 13 23 Normal operation . 13 24 Temperature rise . 13 25 Flexible cables and their connection . 13 26 Mechanical strength . 13 27 Screws, current-carrying parts and connections 13 28 Creepage distances,

41、 clearances and distances 13 29 Resistance to heat, to fire and to tracking . 13 30 Corrosion and resistance to rusting 13 31 Conditional short-circuit current withstand test . 14 32 Electromagnetic compatibility (EMC) 14 33 Vehicle driveover . 14 201 Components 14 202 Resistor coding 15 STANDARD SH

42、EETS 16 CONFIGURATION TYPE 1 . 16 CONFIGURATION TYPE 2 . 28 CONFIGURATION TYPE 3 . 43 BS EN 621962:2017IEC 62196-2:2016 IEC 2016 3 Table 201 Overview of the basic vehicle interface, configuration type 1, single phase . 9 Table 202 Overview of the basic vehicle interface, configuration types 2 and 3,

43、 three-phase or single phase 10 Table 203 Configuration types and standard sheets 11 Table 204 Interoperation of configuration type 2 accessories 28 BS EN 621962:2017IEC 62196-2:2016 IEC 2016 3 Table 201 Overview of the basic vehicle interface, configuration type 1, single phase . 9 Table 202 Overvi

44、ew of the basic vehicle interface, configuration types 2 and 3, three-phase or single phase 10 Table 203 Configuration types and standard sheets 11 Table 204 Interoperation of configuration type 2 accessories 28 4 IEC 62196-2:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PLUGS, SOCKET-OU

45、TLETS, VEHICLE CONNECTORS AND VEHICLE INLETS CONDUCTIVE CHARGING OF ELECTRIC VEHICLES Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standa

46、rdization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Inte

47、rnational Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participat

48、e in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between

49、the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that t