BS EN 62129-1-2016 Calibration of wavelength optical frequency measurement instruments Optical spectrum analyzers《波长校准 光频测量仪器 光谱分析仪》.pdf

《BS EN 62129-1-2016 Calibration of wavelength optical frequency measurement instruments Optical spectrum analyzers《波长校准 光频测量仪器 光谱分析仪》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62129-1-2016 Calibration of wavelength optical frequency measurement instruments Optical spectrum analyzers《波长校准 光频测量仪器 光谱分析仪》.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、Calibration of wavelength/opticalfrequency measurement instrumentsPart 1: Optical spectrum analyzersBS EN 62129-1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62129-1:2016. It isidentical to

2、 IEC 62129-1:2016. It supersedes BS EN 62129:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/86, Fibre optics.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to

3、include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 79838 2ICS 33.140; 33.180.01Compliance with a British Standard cannot confer immunity fromlegal obligatio

4、ns.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62129-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62129-1 June 2016 ICS 33.140

5、; 33.180.01 Supersedes EN 62129:2006 English Version Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers (IEC 62129-1:2016) talonnage des appareils de mesure de longueur donde/appareil de mesure de la frquence optique - Partie 1: Analyseurs de spe

6、ctre optique (IEC 62129-1:2016) Kalibrierung von Messgerten fr die Wellenlnge/optische Frequenz - Teil 1: Optische Spektrumanalysatoren (IEC 62129-1:2016) This European Standard was approved by CENELEC on 2016-02-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which

7、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This

8、European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELE

9、C members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherland

10、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre:

11、 Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62129-1:2016 E BS EN 62129-1:2016EN 62129-1:2016 2 European foreword The text of document 86/477/CDV, future edition 1 of IEC 62129-1, prepared

12、by IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62129-1:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 201

13、6-12-03 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-06-03 This document supersedes EN 62129:2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN sha

14、ll not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62129-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be adde

15、d for the standards indicated: IEC 60793-2-50 NOTE Harmonized as EN 60793-2-50. IEC 61315 NOTE Harmonized as EN 61315. IEC 62129-2 NOTE Harmonized as EN 62129-2. IEC 62522 NOTE Harmonized as EN 62522. IEC 60359:2001 NOTE Harmonized as EN 60359:2002 (not modified). IEC 61290-3-1 NOTE Harmonized as EN

16、 61290-3-1. BS EN 62129-1:2016EN 62129-1:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application.

17、For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 U

18、p-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-731 - International Electrotechnical Vocabulary - Chapter 731: Optical fibre communication - - IEC 60793-2 series Optical fibres

19、- Part 2: Product specifications EN 60793-2 series IEC 60825-1 - Safety of laser products - Part 1: Equipment classification and requirements EN 60825-1 - ISO/IEC 17025 - General requirements for the competence of testing and calibration laboratories EN ISO/IEC 17025 - ISO/IEC Guide 98-3 2008 Uncert

20、ainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) - - BS EN 62129-1:2016 2 IEC 62129-1:2016 IEC 2016 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Preparation for calibration . 12 4.1 Organization . 12 4.2 Traceabil

21、ity . 12 4.3 Preparation . 12 4.4 Reference calibration conditions . 12 5 Wavelength calibration 13 5.1 Overview. 13 5.2 Wavelength calibration under reference conditions . 13 5.2.1 General . 13 5.2.2 Equipment for wavelength calibration under reference conditions 14 5.2.3 Procedure for wavelength c

22、alibration under reference conditions . 14 5.2.4 Calculations of wavelength uncertainty under reference conditions 14 5.3 Wavelength calibration for operating conditions 15 5.3.1 General . 15 5.3.2 Wavelength dependence . 15 5.3.3 Temperature dependence 16 5.4 Calculation of expanded uncertainty . 1

23、7 6 Power level calibration . 18 6.1 Overview. 18 6.2 Power level calibration under reference conditions 19 6.2.1 General . 19 6.2.2 Equipment for power level calibration under reference conditions 19 6.2.3 Procedure for power level calibration under reference conditions . 19 6.2.4 Calculation of po

24、wer level uncertainty under reference conditions . 20 6.3 Power level calibration for operating conditions 21 6.3.1 General . 21 6.3.2 Wavelength dependence . 21 6.3.3 Polarization dependence . 23 6.3.4 Linearity 24 6.3.5 Temperature dependence 26 6.4 Calculation of expanded uncertainty . 27 7 Resol

25、ution bandwidth (spectral resolution) test 28 7.1 Overview. 28 7.2 Resolution bandwidth (spectral resolution) test . 28 7.2.1 General . 28 7.2.2 Equipment for resolution bandwidth (spectral resolution) test 28 7.2.3 Test procedure for resolution bandwidth (spectral resolution) 29 8 Documentation 30

26、8.1 Measurement conditions . 30 8.2 Measurement data and uncertainty . 30 Annex A (normative) Mathematical basis . 31 BS EN 62129-1:2016IEC 62129-1:2016 IEC 2016 3 A.1 General . 31 A.2 Type A evaluation of uncertainty . 31 A.3 Type B evaluation of uncertainty . 32 A.4 Determining the combined standa

27、rd uncertainty 32 A.5 Reporting 33 Annex B (informative) Examples of calculation of calibration uncertainty 34 B.1 General . 34 B.2 Wavelength calibration 34 B.2.1 Uncertainty under reference conditions: refDu 34 B.2.2 Uncertainty under operating conditions 35 B.2.3 Expanded uncertainty calculation

28、36 B.3 Power level calibration 37 B.3.1 Uncertainty under reference conditions: refPDu 37 B.3.2 Uncertainty under operating conditions 38 B.3.3 Expanded uncertainty calculation 41 Annex C (informative) Using the calibration results 42 C.1 General . 42 C.1.1 Overview . 42 C.1.2 Parameters 42 C.1.3 Re

29、strictions . 42 C.2 Additive corrections 42 C.2.1 Parameters 42 C.2.2 Measurements close to a calibration reference wavelength 43 C.2.3 Measurements at other wavelengths 43 C.3 Multiplicative corrections . 44 C.3.1 Parameters 44 C.3.2 Measurements close to a calibration reference wavelength 44 C.3.3

30、 Measurements at other wavelengths 44 C.4 OSA calibration results (additive correction) . 45 Annex D (informative) Wavelength references . 48 D.1 General . 48 D.2 Gas laser lines 48 D.3 Noble gas reference lines . 48 D.4 Molecular absorption lines 49 Bibliography 53 Figure 1 Setup using a gas laser

31、whose wavelength is known 13 Figure 2 Setup using a broadband source with a transmission device 13 Figure 3 Setup using an LD with an unknown wavelength 13 Figure 4 Test configuration for determining the temperature dependence of wavelength uncertainty . 17 Figure 5 Setup for calibration of power le

32、vel under reference conditions 19 Figure 6 Test configuration for determining the wavelength dependence of power level uncertainty . 21 Figure 7 Test configuration for determining the polarization dependence of power level uncertainty . 23 Figure 8 Configuration for testing linearity error of power

33、level uncertainty 24 BS EN 62129-1:2016 4 IEC 62129-1:2016 IEC 2016 Figure 9 Test configuration for determining the temperature dependence of power level uncertainty . 26 Figure C.1 Calibration of OSA wavelength scale using krypton emission lines; 95 % confidence intervals shown . 47 Figure D.1 Abso

34、rption of LED light by acetylene (12C2H2) 50 Figure D.2 Absorption of LED light by hydrogen cyanide (H13C14N) . 52 Table 1 Recommended light sources . 29 Table C.1 OSA calibration results 46 Table C.2 Summary of OSA calibration parameters 46 Table D.1 Vacuum wavelengths (nm) of selected gas laser li

35、nes 48 Table D.2 Vacuum wavelengths (nm) of noble gas reference lines . 49 Table D.3 Vacuum wavelengths (nm) for the 1+3band of acetylene 12C2H2absorption lines 21-23 50 Table D.4 Vacuum wavelengths (nm) for the 1+3band of acetylene 13C2H2absorption lines 21-23 51 Table D.5 Vacuum wavelengths (nm) o

36、f selected hydrogen cyanide (H13C14N) absorption lines 24 . 51 BS EN 62129-1:2016IEC 62129-1:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS Part 1: Optical spectrum analyzers FOREWORD 1) The International Electrotechnic

37、al Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this e

38、nd and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Com

39、mittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in a

40、ccordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all

41、 interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held re

42、sponsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any diverg

43、ence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC ma

44、rks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual exper

45、ts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Pu

46、blication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Pu

47、blication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62129-1 has been prepared by IEC technical committee 86: Fibre optics. This first edition of IEC 62129-1 cancels and replaces the first edition o

48、f IEC 62129, published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) update of term and definitions; b) update of calibration conditions; c) calculation change of uncertainties relate

49、d to wavelength temperature dependence, power linearity, power level temperature dependence; d) move of Annex E to the bibliography. BS EN 62129-1:2016 6 IEC 62129-1:2016 IEC 2016 The text of this standard is based on the following documents: CDV Report on voting 86/477/CDV 86/483/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordanc