BS EN 60349-2-2010 Electrical traction Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors《电力牵引 铁路与道路车辆用旋转电机 电子变流器补偿的交流电动机》.pdf

《BS EN 60349-2-2010 Electrical traction Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors《电力牵引 铁路与道路车辆用旋转电机 电子变流器补偿的交流电动机》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60349-2-2010 Electrical traction Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors《电力牵引 铁路与道路车辆用旋转电机 电子变流器补偿的交流电动机》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、Electrical traction Rotatingelectrical machines for rail androad vehiclesPart 2: Electronic converter-fed alternating current motorsBS EN 60349-2:2010BSI Standards Publicationraising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWLicensed Copy: Wang Bin, ISO

2、/EXCHANGE CHINA STANDARDS, 21/04/2011 08:29, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 60349-2:2010. It isidentical to IEC 60349-2:2010. It supersedes BS EN 60349-2:2001 which iswithdrawn.The UK participation in its preparation was entrusted by T

3、echnical CommitteeGEL/9, Railway Electrotechnical Applications, to Subcommittee GEL/9/2,Railway Electrotechnical Applications - Rolling stock.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessar

4、y provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 63091 0ICS 29.160.30; 43.020; 45.060.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy a

5、nd Strategy Committee on 31 January 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60349-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 08:29, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60349-2 NORME EUROPENNE EUROPISCHE NORM Dec

6、ember 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means re

7、served worldwide for CENELEC members. Ref. No. EN 60349-2:2010 E ICS 45.060 Supersedes EN 60349-2:2001English version Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors (IEC 60349-2:2010) Traction lectrique - Mach

8、ines lectriques tournantes des vhicules ferroviaires et routiers - Partie 2: Moteurs courant alternatif aliments par convertisseurs lectroniques (CEI 60349-2:2010) Elektrische Zugfrderung - Drehende elektrische Maschinen fr Bahn- und Straenfahrzeuge - Teil 2: Umrichtergespeiste Wechselstrommotoren (

9、IEC 60349-2:2010) This European Standard was approved by CENELEC on 2010-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists an

10、d bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respon

11、sibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France,

12、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60349-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 08:

13、29, Uncontrolled Copy, (c) BSIEN 60349-2:2010 - 2 - Foreword The text of document 9/1416/FDIS, future edition 3 of IEC 60349-2, prepared by IEC TC 9, Electrical equipment and systems for railways, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60349-2 on 2010-12-01.

14、 This European Standard supersedes EN 60349-2:2001. The main technical changes with regard to EN 60349-2:2001 are as follows: As the limits of vibration velocities have been changed in EN 60034-14, the limits valid for traction motors are now directly stated in this standard. In addition to the exis

15、ting method for measuring and calculating the sound power level, the methods described in EN ISO 3741, EN ISO 3743 (series), EN ISO 3744, ISO 3745, EN ISO 9614 (series) are also allowed. However the maximum sound power levels and the correction for pure tones remain unchanged in C.7 and C.8. Attenti

16、on is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national le

17、vel by publication of an identical national standard or by endorsement (dop) 2011-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2013-12-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60349-

18、2:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60034-1 NOTE Harmonized as EN 60034-1. IEC 60034-2-1 NOTE Harmonized as EN 60034-2-1. IEC 60034-5 NOTE Harm

19、onized as EN 60034-5. IEC 60034-14 NOTE Harmonized as EN 60034-14. IEC 61260 NOTE Harmonized as EN 61260. IEC 61287 series NOTE Part 1 harmonized as EN 61287-1. IEC 61373 NOTE Harmonized as EN 61373. IEC 61377-1 NOTE Harmonized as EN 61377-1. IEC 61377-3 NOTE Harmonized as EN 61377-3. ISO 3741 NOTE

20、Harmonized as EN ISO 3741. ISO 3743-1 NOTE Harmonized as EN ISO 3743-1. BS EN 60349-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 08:29, Uncontrolled Copy, (c) BSI- 3 - EN 60349-2:2010 ISO 3743-2 NOTE Harmonized as EN ISO 3743-2. ISO 3744 NOTE Harmonized as EN ISO 3744. ISO

21、 3746 NOTE Harmonized as EN ISO 3746. ISO 9614-1 NOTE Harmonized as EN ISO 9614-1. ISO 9614-2 NOTE Harmonized as EN ISO 9614-2. _ BS EN 60349-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 08:29, Uncontrolled Copy, (c) BSIEN 60349-2:2010 - 4 - Annex ZA (normative) Normative

22、references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docume

23、nt (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60034-1 (mod) - Rotating electrical machines - Part 1: Rating and performance EN 60034-1 - IE

24、C 60034-8 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation EN 60034-8 - IEC 60034-9 (mod) - Rotating electrical machines - Part 9: Noise limits EN 60034-9 - IEC 60034-171)- Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Ap

25、plication guide - - IEC 60050-131 - International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory - - IEC 60050-151 - International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices - - IEC 60050-411 - International Electrotechnical Vocabulary (IEV) - Chapter

26、 411: Rotating machinery - - IEC 60050-811 - International electrotechnical vocabulary (IEV) - Chapter 811: Electric traction - - IEC 60085 - Electrical insulation - Thermal evaluation and designation EN 60085 - IEC 61672 Series Electroacoustics - Sound level meters EN 61672 Series IEC 62498-1 - Rai

27、lway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock - - 1) IEC 60034-17 is superseded by IEC/TS 60034-17:2002, which is harmonized as CLC/TS 60034-17:2004. BS EN 60349-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 08:29, Unc

28、ontrolled Copy, (c) BSI 2 60349-2 IEC:2010 CONTENTS 1 Scope and object6 2 Normative references7 3 Terms and definitions .7 4 Environmental conditions 9 5 Characteristics9 5.1 Exchange of information 9 5.2 Reference temperature 10 5.3 Specified characteristics 10 5.4 Declared characteristics 10 5.5 E

29、fficiency characteristics .10 5.6 Traction motor characteristics10 5.7 Auxiliary motor characteristics .11 6 Marking 11 6.1 Nameplate.11 6.2 Terminal and lead marking.11 7 Test categories.11 7.1 Test categories11 7.1.1 General .11 7.1.2 Type tests12 7.1.3 Routine tests .13 7.1.4 Investigation tests1

30、3 7.2 Summary of tests.13 8 Type tests.13 8.1 Temperature-rise tests.13 8.1.1 General .13 8.1.2 Ventilation during rating tests.14 8.1.3 Measurement of temperature .14 8.1.4 Judgement of results .14 8.1.5 Limits of temperature rise 14 8.1.6 Short-time overload test.14 8.2 Characteristic tests and to

31、lerances 15 8.2.1 General .15 8.2.2 Tolerances.16 8.3 Overspeed test 16 8.4 Vibration tests .16 9 Routine tests 17 9.1 General .17 9.2 Short-time heating run .17 9.3 Characteristic tests and tolerances 17 9.3.1 Asynchronous motors 17 9.3.2 Synchronous motors 18 9.4 Overspeed tests 18 9.5 Dielectric

32、tests.18 9.6 Vibration tests (imbalance) 19 Annex A (normative) Measurement of temperature .20 BS EN 60349-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 08:29, Uncontrolled Copy, (c) BSI60349-2 IEC:2010 3 Annex B (normative) Conventional values of traction motor transmissio

33、n losses .23 Annex C (informative) Noise measurement and limits .24 Annex D (normative) Supply voltages of traction systems .33 Annex E (normative) Agreement between user and manufacturer .34 Bibliography35 Figure B.1 Conventional values of traction motor transmission losses .23 Figure C.1 Limiting

34、mean sound power level for airborne noise emitted by traction motors 30 Figure C.2 Location of measuring points and prescribed paths for horizontal machines 31 Figure C.3 Location of measuring points and prescribed paths for vertical machines.32 Table 1 Summary of tests.13 Table 2 Limits of temperat

35、ure rise for continuous and other ratings.14 Table 3 Temperature rises for short-time overload ratings 15 Table 4 Dielectric test voltages.19 Table C.1 Corrections 26 Table C.2 Corrections 29 Table C.3 Correction for pure tones30 BS EN 60349-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARD

36、S, 21/04/2011 08:29, Uncontrolled Copy, (c) BSI 6 60349-2 IEC:2010 ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES Part 2: Electronic converter-fed alternating current motors 1 Scope and object This part of IEC 60349 applies to converter-fed alternating current motors formi

37、ng part of the equipment of electrically propelled rail and road vehicles. The object of this part is to enable the performance of a motor to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for comparison with other motors. Where further testin

38、g is to be undertaken in accordance with IEC 61377-1 and IEC 61377-3, it may be preferable, to avoid duplication, that some type and investigation tests be carried out on the combined test bed. Particular attention is drawn to the need for collaboration between the designers of the motor and its ass

39、ociated converter as detailed in 5.1. NOTE 1 This part also applies to motors installed on trailers hauled by powered vehicles. NOTE 2 The basic requirements of this part may be applied to motors for special purpose vehicles such as mine locomotives but this part does not cover flameproof or other s

40、pecial features that may be required. NOTE 3 It is not intended that this part should apply to motors on small road vehicles, such as battery-fed delivery vehicles, factory trucks, etc. This part also does not apply to minor machines such as windscreen wiper motors, etc. that may be used on all type

41、s of vehicles. NOTE 4 Industrial type motors complying with IEC 60034 may be suitable for some auxiliary drives, providing that it is demonstrated that operation on a converter supply will meet the requirements of the particular application. The rating of traction motors fed in parallel by a common

42、converter has to take into account the effect on load-sharing of differences of wheel diameter and of motor characteristics as well as weight transfer when operating at high coefficients of adhesion. The user is to be informed of the maximum permissible difference in wheel diameter for the particula

43、r application. The electrical input to motors covered by this part comes from an electronic converter. NOTE 5 At the time of drafting, only the following combinations of motors and converters had been used for traction applications, but it may also apply to other combinations which may be used in th

44、e future: asynchronous motors fed by voltage source converters; asynchronous motors fed by current source converters; synchronous motors fed by current source converters. The motors covered by this part are classified as follows: a) Traction motors Motors for propelling rail or road vehicles. b) Aux

45、iliary motors not covered by IEC 60034 Motors for driving compressors, fans, auxiliary generators or other auxiliary machines. BS EN 60349-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 21/04/2011 08:29, Uncontrolled Copy, (c) BSI60349-2 IEC:2010 7 2 Normative references The following

46、referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60034-1, Rotating electrical machines Part 1: Rating and pe

47、rformance IEC 60034-8, Rotating electrical machines Part 8: Terminal markings and direction of rotation IEC 60034-9, Rotating electrical machines Part 9 Noise limits IEC 60034-17, Rotating electrical machines Part 17: Cage induction motors when fed from convertors Application guide IEC 60050-131, In

48、ternational Electrotechnical Vocabulary Part 131: Circuit theory IEC 60050-151, International Electrotechnical Vocabulary Part 151: Electrical and magnetic devices IEC 60050-411, International Electrotechnical Vocabulary Part 411: Rotating machinery IEC 60050-811, International Electrotechnical Voca

49、bulary Part 811: Electric traction IEC 60085, Thermal evaluation and designation IEC 61672, Electroacoustics Sound level meters IEC 62498-1, Railway applications Environmental conditions for equipment Part 1: Equipment on board rolling stock 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60050-131, IEC 60050-151, IEC 60050-411 and IEC 60050-811, as well as the following, apply. 3