BS EN 60143-1-2015 Series capacitors for power systems General《电力系统用串联电容器 总则》.pdf

《BS EN 60143-1-2015 Series capacitors for power systems General《电力系统用串联电容器 总则》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60143-1-2015 Series capacitors for power systems General《电力系统用串联电容器 总则》.pdf（70页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationSeries capacitors for power systemsPart 1: GeneralBS EN 60143-1:2015National forewordThis British Standard is the UK implementation of EN 60143-1:2015. It isidentical to IEC 60143-1:2015. It supersedes BS EN 60143-1:2004 which is withdrawn.The UK participation in its prepara

2、tion was entrusted to TechnicalCommittee PEL/33, Power capacitors.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application

3、. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 87523 6ICS 31.060.70Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandardsPolicyand StrategyCommitteeon31Oct

4、ober2015.Amendments/corrigendaissuedsincepublicationDateTextaffectedBRITISH STANDARDBS EN 60143-1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60143-1 October 2015 ICS 31.060.70 Supersedes EN 60143-1:2004 English Version Series capacitors for power systems - Part 1: General (IEC 60143-1:

5、2015) Condensateurs srie destins tre installs sur des rseaux - Partie 1: Gnralits (IEC 60143-1:2015) Reihenkondensatoren fr Starkstromanlagen - Teil 1: Allgemeines (IEC 60143-1:2015) This European Standard was approved by CENELEC on 2015-07-30. CENELEC members are bound to comply with the CEN/CENELE

6、C Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or

7、to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as t

8、he official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem

9、bourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CE

10、N-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60143-1:2015 E BS EN 60143-1:2015EN 60143-1:2015 2 European foreword The text of document 33/578/FDIS, future editio

11、n 5 of IEC 60143-1, prepared by IEC/TC 33 “Power capacitors and their applications“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60143-1:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an

12、 identical national standard or by endorsement (dop) 2016-04-30 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-07-30 This document supersedes EN 60143-1:2004. The main change with respect to EN is that the endurance test has been replaced by

13、 an ageing test because voltage cycling is already performed in the cold duty test. The guide section has been expanded regarding long line correction and altitude correction. In addition the insulation tables and references to other standards have been updated. Attention is drawn to the possibility

14、 that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60143-1:2015 was approved by CENELEC as a European Standard w

15、ithout any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60060-2:2010 NOTE Harmonized as EN 60060-2:2011. IEC 60110-1:1998 NOTE Harmonized as EN 60110-1:1998. IEC 60252-1:2010 NOTE Harmonized as EN 60252-1:2011. IEC 610

16、48:2006 NOTE Harmonized as EN 61048:2006. IEC 61049:1991 NOTE Harmonized as EN 61049:1993. IEC 61071 NOTE Harmonized as EN 61071. IEC 60270:2000 NOTE Harmonized as EN 60270:2001. IEC 60909-0:2001 NOTE Harmonized as EN 60909-0:2001. BS EN 60143-1:2015EN 60143-1:2015 3 Annex ZA (normative) Normative r

17、eferences to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, th

18、e latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in

19、 this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050 series International Electrotechnical Vocabulary - series IEC 60060-1 2010 High-voltage test techniques - Part 1: General definitions and test requirements EN 60060-1 2010 IEC 60071-1 2006 Insulation co-ordina

20、tion - Part 1: Definitions, principles and rules EN 60071-1 2006 IEC 60071-2 1996 Insulation co-ordination - Part 2: Application guide EN 60071-2 1997 IEC 60143-2 2012 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks EN 60143-2 2013 IEC 60143-3 1998 Serie

21、s capacitors for power systems - Part 3: Internal fuses EN 60143-3 1998 IEC 60143-4 2010 Series capacitors for power systems - Part 4: Thyristor controlled series capacitors EN 60143-4 2010 IEC 60549 2013 High-voltage fuses for the external protection of shunt capacitors EN 60549 2013 IEC 60871-1 20

22、14 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General EN 60871-1 2014 IEC 62271-1 2007 High-voltage switchgear and controlgear - Part 1: Common specifications EN 62271-1 2008 IEEE Std 693 - IEEE Recommended Practice for Seismic Design of Substations - - BS

23、 EN 60143-1:2015 2 IEC 60143-1:2015 IEC 2015 CONTENTS FOREWORD 6 1 Scope and object .8 2 Normative references 8 3 Terms and definitions 9 4 Service conditions . 15 4.1 Normal service conditions . 15 4.2 Ambient air temperature categories . 15 4.3 Abnormal service conditions 16 4.4 Abnormal power sys

24、tem conditions . 16 5 Quality requirements and tests 16 5.1 Test requirements for capacitor units . 16 5.1.1 General . 16 5.1.2 Test conditions 16 5.1.3 Voltage limits as established by overvoltage protector 17 5.1.4 Determination of protective level voltage Upland Ulim. 18 5.2 Classification of tes

25、ts 18 5.2.1 General . 18 5.2.2 Routine tests . 18 5.2.3 Type tests 19 5.2.4 Special test (ageing test) . 19 5.3 Capacitance measurement (routine test) . 19 5.3.1 Measuring procedure . 19 5.3.2 Capacitance tolerance . 20 5.4 Capacitor loss measurement (routine test) 20 5.4.1 Measuring procedure . 20

26、5.4.2 Loss requirements . 21 5.4.3 Losses in external fuses 21 5.5 Voltage test between terminals (routine test) . 21 5.6 AC voltage test between terminals and container (routine test) 21 5.7 Test on internal discharge device (routine test) . 21 5.8 Sealing test (routine test) 22 5.9 Thermal stabili

27、ty test (type test) 22 5.9.1 Measuring procedure . 22 5.9.2 Capacitor loss measurement 23 5.10 AC voltage test between terminals and container (type test) 23 5.11 Lightning impulse voltage test between terminals and container (type test) 24 5.12 Cold duty test (type test) . 24 5.13 Discharge current

28、 test (type test) 25 6 Insulation level 26 6.1 Insulation voltages 26 6.1.1 Standard values . 26 6.1.2 Insulation to earth and between phases . 26 6.1.3 Insulation levels for insulators and equipment on the platform 26 6.2 Creepage distance 33 6.3 Air clearances . 34 7 Overloads, overvoltages and du

29、ty cycles . 38 BS EN 60143-1:2015IEC 60143-1:2015 IEC 2015 3 7.1 Currents . 38 7.2 Transient overvoltages 38 7.3 Duty cycles . 39 8 Safety requirements 39 8.1 Discharge device 39 8.2 Container connection 39 8.3 Protection of the environment 40 8.4 Other safety requirements . 40 9 Markings and instru

30、ction books 40 9.1 Markings of the unit 40 9.1.1 Rating plate . 40 9.1.2 Warning plate 41 9.2 Markings of the bank . 41 9.2.1 Instruction sheet or rating plate 41 9.2.2 Warning plate 41 9.3 Instruction book 41 10 Guide for selection of ratings, installation and operation . 42 10.1 General 42 10.2 Re

31、actance per line, rated reactance per bank and number of modules per bank . 42 10.2.1 Capacitive reactance per line . 42 10.2.2 Number of series capacitor banks in a transmission line . 43 10.2.3 Number of modules in a capacitor bank 44 10.2.4 Future requirements for series capacitors . 44 10.3 Curr

32、ent ratings for the bank . 44 10.3.1 General . 44 10.3.2 Typical bank overload and swing current capabilities 45 10.3.3 Analysis to determine the continuous and emergency overload current rating . 46 10.3.4 Analysis to determine the swing current rating 46 10.4 Overvoltage protection requirements .

33、46 10.5 Voltage limitations during power system faults . 47 10.5.1 General . 47 10.5.2 Voltage limitation when the inductance between the primary overvoltage protector and the capacitors is not significant 47 10.5.3 Voltage limitation when the inductance between the primary overvoltage protector and

34、 the capacitors is significant 48 10.6 Protective and switching devices . 48 10.6.1 Capacitor fusing . 48 10.6.2 Other devices 48 10.6.3 Connection diagrams . 48 10.7 Choice of insulation level 49 10.7.1 Normal cases . 49 10.7.2 Altitude exceeding 1 000 m 49 10.8 Long line correction 50 10.9 Other a

35、pplication considerations . 51 10.9.1 General . 51 10.9.2 Ferro-resonance 51 10.9.3 Sub-synchronous resonance 51 BS EN 60143-1:2015 4 IEC 60143-1:2015 IEC 2015 10.9.4 Relay protection of the power system . 51 10.9.5 Attenuation of carrier-frequency transmission . 52 10.9.6 Non-transposed transmissio

36、n lines . 52 10.9.7 Power system harmonic currents 52 10.9.8 TRV across line circuit-breakers . 52 10.9.9 Delayed line current zero crossing . 53 10.9.10 Prolonged secondary arc current 53 Annex A (normative) Test requirements and application guide for external fuses and units to be externally fused

37、 . 54 A.1 Overview 54 A.2 Purpose 54 A.3 Terms employed in Annex A 54 A.4 Performance requirements 54 A.5 Tests 55 A.5.1 Tests on fuses . 55 A.5.2 Type tests on capacitor container . 55 A.6 Guide for coordination of fuse protection . 55 A.6.1 General . 55 A.6.2 Protection sequence 55 A.7 Choice of f

38、uses . 56 A.7.1 General . 56 A.7.2 Non current-limiting fuses 56 A.7.3 Current-limiting fuses . 56 A.8 Information needed by the user of the fuses 56 Annex B (informative) Economic evaluation of series capacitor bank losses . 57 Annex C (informative) Capacitor bank fusing and unit arrangement 58 C.1

39、 General 58 C.2 Internally fused capacitor bank 58 C.3 Externally fused capacitor bank . 58 C.4 Fuseless capacitor bank 59 Annex D (informative) Examples of typical connection diagrams for large series capacitor installations for transmission lines 61 Annex E (informative) Precautions to be taken to

40、 avoid pollution of the environment by polychlorinated biphenyls . 62 Bibliography . 63 Figure 1 Typical nomenclature of a series capacitor installation 12 Figure 2 Classification of overvoltage protection 17 Figure 3 Time and amplitude limits for an overvoltage period waveform 25 Figure 4 Air clear

41、ance versus a.c. power frequency withstand voltage 38 Figure 5 Typical current-time profile of an inserted capacitor bank following the fault and clearing of parallel line . 45 Figure C.1 Typical connections between capacitor units in a segment or phase 59 Figure C.2 Typical connections between elem

42、ents within a capacitor unit . 60 Figure D.1 Diagrams for smaller banks 61 Table 1 Letter symbols for upper limit of temperature range . 15 BS EN 60143-1:2015IEC 60143-1:2015 IEC 2015 5 Table 2 Ambient air temperature in thermal stability test . 22 Table 3 Standard insulation levels for range I (1 k

43、V 245 kV) (1 of 2) . 30 Table 5 Typical insulation levels for platform-to-ground insulators (1 of 2) 32 Table 6 Specific creepage distances 34 Table 7 Correlation between standard lightning impulse withstand voltages and minimum air clearances 36 Table 8 Correlation between standard switching impuls

44、e withstand voltages and minimum phase-to-earth air clearances . 37 (reproduced from IEC 60071-2:1996, Table A.2) . 37 Table 9 Correlation between standard switching impulse withstand voltages and minimum phase-to-phase air clearances . 37 Table 10 Typical bank overload and swing current capabilitie

45、s . 45 BS EN 60143-1:2015 6 IEC 60143-1:2015 IEC 2015 INTERNATIONAL LECTROTECHNICAL COMMISSION _ SERIES CAPACITORS FOR POWER SYSTEMS Part 1: General FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnica

46、l committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Te

47、chnical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, govern

48、mental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or

49、 agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be h