BS EN 16811-2-2016 Winter service equipment and products De-icing agents Calcium chloride and Magnesium chloride Requirements and test methods《冬季服务设备及产品 除冰剂 氯化钙和氯化镁 要求和试验方法》.pdf

《BS EN 16811-2-2016 Winter service equipment and products De-icing agents Calcium chloride and Magnesium chloride Requirements and test methods《冬季服务设备及产品 除冰剂 氯化钙和氯化镁 要求和试验方法》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16811-2-2016 Winter service equipment and products De-icing agents Calcium chloride and Magnesium chloride Requirements and test methods《冬季服务设备及产品 除冰剂 氯化钙和氯化镁 要求和试验方法》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 16811-2:2016Winter service equipment andproducts De-icing agentsPart 2: Calcium chloride and Magnesiumchloride Requirements and test methodsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 16811-2:2016 BRITISH STANDARDNational forewordThis British Standard

2、 is the UK implementation of EN 16811-2:2016.The UK participation in its preparation was entrusted to TechnicalCommittee B/513, Construction equipment and plant and site safety.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not

3、purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 88077 3ICS 13.030.40; 71.100.45Compliance with a British Standard cannot confer immunity fromle

4、gal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 16811-2:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16811-2 August 2016

5、 ICS 13.030.40; 71.100.45 English Version Winter service equipment and products - De-icing agents -Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods Matriels de viabilit hivernale - Fondants routiers - Partie 2 : Chlorure de calcium et chlorure de magnsium - Exigences e

6、t mthodes dessai Winterdienstausrstung - Enteisungsmittel - Teil 2: Calcium- und Magnesiumchlorid - Anforderungen und Prfverfahren This European Standard was approved by CEN on 15 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

7、 giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three

8、 official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodi

9、es of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Sp

10、ain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwid

11、e for CEN national Members. Ref. No. EN 16811-2:2016 EBS EN 16811-2:2016EN 16811-2:2016 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 7 4 Requirements for calcium chloride and magnesium chloride . 7 4.1 Chemical requirements . 7

12、 4.1.1 Calcium chloride 7 4.1.2 Magnesium chloride . 8 4.2 Sieve analysis 8 4.2.1 Calcium chloride 8 4.2.2 Magnesium chloride . 9 4.3 General requirements . 9 4.4 Packaging and marking . 10 4.5 Material safety data sheet and product description 11 5 Requirements for solutions of calcium chloride and

13、 magnesium chloride 11 5.1 Chemical Requirements . 11 5.1.1 Calcium chloride . 11 5.1.2 Magnesium chloride 11 5.2 General requirements 12 5.3 Marking, material safety data sheet and product description 13 6 Requirements for blends of calcium chloride and magnesium chloride with sodium chloride and/o

14、r potassium chloride . 13 6.1 General . 13 6.2 Chemical requirements 13 6.2.1 General . 13 6.2.2 Solid blends 13 6.2.3 Liquid blends . 13 6.3 Sieve analysis . 14 6.4 General Requirements . 14 6.5 Packaging, marking, material safety data sheet and product description 14 7 Sampling 14 8 Test methods .

15、 15 8.1 General . 15 8.2 Calcium chloride . 15 8.3 Magnesium chloride 15 8.4 Other chlorides . 15 8.4.1 Other chlorides (magnesium chloride, potassium chloride, sodium chloride) in calcium chloride . 15 8.4.2 Other chlorides (calcium chloride, potassium chloride, sodium chloride) in magnesium chlori

16、de 15 8.5 Sodium chloride 16 8.6 Potassium chloride 16 BS EN 16811-2:2016EN 16811-2:2016 (E) 3 8.7 Sulfate . 16 8.8 Water insoluble matter 16 8.9 Sieve analysis . 16 8.10 Heavy metals 16 8.11 Hydrocarbons 16 8.12 Total organic carbon (TOC). 16 8.13 pH . 17 8.14 Bulk density 17 8.15 Density 17 Annex

17、A (normative) Product descriptions . 18 A.1 Product description for calcium chloride 18 A.2 Product description for magnesium chloride 20 A.3 Product description for blends of calcium chloride and magnesium chloride with sodium chloride and/or potassium chloride 23 Annex B (normative) Sampling . 26

18、B.1 Solid form 26 B.1.1 Package shipments . 26 B.1.2 Bulk shipments 26 B.2 Liquid form . 26 B.3 Labelling and distribution of samples 26 B.4 Sampling report 27 Annex C (normative) Analytical methods Determination of calcium chloride by complexometry 28 C.1 Scope . 28 C.2 Principle . 28 C.3 Reagents

19、. 28 C.4 Apparatus 29 C.5 Procedure 29 C.5.1 Solid samples 29 C.5.2 Liquid samples . 29 C.5.3 Titration . 29 C.6 Calculation. 30 Bibliography . 31 BS EN 16811-2:2016EN 16811-2:2016 (E) 4 European foreword This document (EN 16811-2:2016) has been prepared by Technical Committee CEN/TC 337 “Road opera

20、tion equipment and products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2017, and conflicting national standards shall be withdrawn at the

21、 latest by February 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. EN 16811, Winter service equipment and products De-icing age

22、nts, is currently composed with the following parts: Part 1: Sodium chloride Requirements and test methods; Part 2: Calcium chloride and Magnesium chloride Requirements and test methods; Part 3: Other solid and liquid de-icing agents Requirements and test methods CEN/TS. According to the CEN-CENELEC

23、 Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela

24、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16811-2:2016EN 16811-2:2016 (E) 5 Introduction De-icing agents are important for the winter maintenance of ro

25、ads. They can prevent and, in addition to it, eliminate slippery conditions. The standard describes the requirements for de-icing agents and their testing methods. The requirements are different for using, storage and type of distribution (spreading and spraying). These need different properties. Th

26、e aim of this standard is an easy description of the product specifications for tenders and other purchasing procedures. BS EN 16811-2:2016EN 16811-2:2016 (E) 6 1 Scope This European Standard specifies the essential requirements of calcium chloride and magnesium chloride for spreading on roads for w

27、inter maintenance and includes tests of these requirements. The requirements are specified for calcium chloride and magnesium chloride in solid form and in water solution, which is delivered to the customer. 2 Normative references The following documents, in whole or in part, are normatively referen

28、ced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 932-1, Tests for general properties of aggregates Part 1: Methods for sam

29、pling EN 1235, Solid fertilizers Test sieving (ISO 8397:1988 modified) EN 1236, Fertilizers Determination of bulk density (loose) (ISO 3944:1992 modified) EN 1484, Water analysis Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) EN 14016-2, Binders for

30、 magnesite screeds Caustic magnesia and magnesium chloride Part 2: Test methods EN 15144, Winter maintenance equipment Terminology Terms for winter maintenance EN 16198, Fertilizers Determination of magnesium by complexometry EN 16811-1, Winter service equipment and products De-icing agents Part 1:

31、Sodium chloride Requirements and test methods EN ISO 3696, Water for analytical laboratory use Specification and test methods (ISO 3696) EN ISO 9377-2, Water quality Determination of hydrocarbon oil index Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2) EN ISO 10523, Water

32、 quality Determination of pH (ISO 10523) EN ISO 11885, Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885) EN ISO 12846, Water quality Determination of mercury Method using atomic absorption spectrometry (AAS) with and wi

33、thout enrichment (ISO 12846) ISO 565, Test sieves Metal wire cloth, perforated metal plate and electroformed sheet Nominal sizes of openings ISO 649-2, Laboratory glassware Density hydrometers for general purposes Part 2: Test methods and use ISO 758, Liquid chemical products for industrial use Dete

34、rmination of density at 20 degrees C BS EN 16811-2:2016EN 16811-2:2016 (E) 7 ISO 2479, Sodium chloride for industrial use Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations ISO 2480, Sodium chloride for industrial use Determination o

35、f sulphate content Barium sulphate gravimetric method ISO 2591-1, Test sieving Part 1: Methods using test sieves of woven wire cloth and perforated metal plate ISO 6227, Chemical products for industrial use General method for determination of chloride ions Potentiometric method 3 Terms and definitio

36、ns For the purposes of this document, the terms and definitions given in EN 15144 and the following apply. 3.1 calcium chloride CaCl2substance which is produced from calcium carbonate and hydrochloric acid, as by-product of the synthetic soda ash process, and as by-product of magnesium oxide product

37、ion Note 1 to entry: It can also result from flue gas cleaning (e.g. waste incinerators). It is available in varying concentrations, as flakes with crystal water (calcium chloride dihydrate), and as anhydrous solid like pellets, prills or granules. For the application in winter maintenance the calci

38、um chloride is also used as water solutions in varying concentrations. 3.2 magnesium chloride MgCl2substance which is produced from natural underground deposits, from salt lakes, from natural brines, from sea water and as by-product of potassium chloride and potassium sulphate production Note 1 to e

39、ntry: It is available as flakes, prills, or pellets with crystal water (magnesium chloride hexahydrate). For the application in winter maintenance the magnesium chloride is also used as water solutions in varying concentrations. 3.3 multi-chloride blends solid or liquid blends, respectively multi-ch

40、loride brines of calcium chloride and magnesium chloride with sodium and/or potassium chloride Note 1 to entry: Such blends are produced by mixing or as by-product from potash production. 4 Requirements for calcium chloride and magnesium chloride 4.1 Chemical requirements 4.1.1 Calcium chloride The

41、product shall conform to the requirements specified in Table 1. BS EN 16811-2:2016EN 16811-2:2016 (E) 8 Table 1 Chemical requirements for calcium chloride Parameter Limit Weight % Flakes Pellets, prills, granules Calcium chloride Min. 75 Min. 94 Other chlorides (magnesium chloride, potassium chlorid

42、e, sodium chloride) Max. 5 Sulfate Max. 0,5 Water insoluble matter Max. 0,5 NOTE 1 Other chlorides and sulfate are expressed as percentage in the anhydrous product. NOTE 2 Other chlorides expressed as NaCl. 4.1.2 Magnesium chloride The product shall conform to the requirements specified in Table 2.

43、Table 2 Chemical requirements for magnesium chloride Parameter Limit Weight % Flakes, prills, pellets Magnesium chloride Min. 46,5 Other chlorides (calcium chloride, potassium chloride, sodium chloride) Max. 5 Sulfate Max. 1,5 Water insoluble matter Max. 0,5 NOTE 1 Other chlorides and sulfate are ex

44、pressed as percentage in the anhydrous product. NOTE 2 Other chlorides expressed as NaCl. 4.2 Sieve analysis 4.2.1 Calcium chloride The product shall conform to the requirements specified in Table 3. BS EN 16811-2:2016EN 16811-2:2016 (E) 9 Table 3 Sieve analysis for calcium chloride Sieve size Weigh

45、t % passing test sieve Flakes Pellets, prills, granules 20 mm 100 - 10 mm Min. 95 100 5 mm 80 - 100 80 - 100 2 mm Max. 40 0 - 20 0,8 mm 0 - 10 0 - 5 4.2.2 Magnesium chloride The product shall conform to the requirements specified in Table 4. Table 4 Sieve analysis for magnesium chloride Sieve size W

46、eight % passing test sieve Flakes Pellets, prills 20 mm 100 - 10 mm Min. 95 100 5 mm Max. 90 80 - 100 2 mm Max. 25 0 - 20 0,8 mm 0 - 10 0 - 5 4.3 General requirements The product shall conform to the requirements specified in Table 5. BS EN 16811-2:2016EN 16811-2:2016 (E) 10 Table 5 General requirem

47、ents for calcium chloride and magnesium chloride Parameter Limit Unit pH of 10 weight % solution between 5 and 11 Al (Aluminium) As (Arsenic) Cd (Cadmium) Co (Cobalt) Cr (Chromium) Cu (Copper) Hg (Mercury) Ni (Nickel) Pb (Lead) Zn (Zinc) Hydrocarbons 50 2,5 2 2 5 5 0,5 5 5 20 100 mg/kg mg/kg mg/kg m

48、g/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg NOTE 1 The limits for Al (Aluminium) and hydrocarbons are foreseen for products which are not of natural origin. There is no need to determine these parameters in natural based CaCl2 resp. MgCl2. NOTE 2 The parameters are stated as mg/kg of anhydrous pr

49、oduct. The product shall arrive at purchasers delivery point in a free-flowing and usable condition. For products from flue gas cleaning (e.g. waste incinerators, etc.) the supplier shall supply the content of total organic carbon (TOC) for the evaluation of the environmental impact. 4.4 Packaging and marking The product shall be packaged and transported in a manner that protects the product from moisture. The following information shall be marked on the packa