BS EN 16104-2012 Food data Structure and interchange format《食品数据 结构和交换格式》.pdf

《BS EN 16104-2012 Food data Structure and interchange format《食品数据 结构和交换格式》.pdf》由会员分享，可在线阅读，更多相关《BS EN 16104-2012 Food data Structure and interchange format《食品数据 结构和交换格式》.pdf（76页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16104:2012Food data Structure and interchange format Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or

2、 networking permitted without license from IHS-,-,-BS EN 16104:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16104:2012.The UK participation in its preparation was entrusted to TechnicalCommittee AW/275, Food analysis - Horizontal methods.A list of organi

3、zations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 201

4、3ISBN 978 0 580 70792 6 ICS 35.240.60; 67.040 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationDate Text affect

5、edCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16104:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16104 December 2012 ICS 35.240.60; 67.040 English Version F

6、ood data - Structure and interchange format Donnes sur les aliments - Structure et format dchange Lebensmitteldaten - Struktur und Austauschformat This European Standard was approved by CEN on 3 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate

7、the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standa

8、rd exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the natio

9、nal standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slov

10、akia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved w

11、orldwide for CEN national Members. Ref. No. EN 16104:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16104:2012 EN 16104:2012 (E) 2 Contents Page Foreword . 4 Introd

12、uction 5 1 Scope 7 2 Terms and definitions . 8 3 Symbols (and abbreviated terms) . 12 3.1 UML notation . 12 3.2 Abbreviated terms and acronyms . 12 4 Data structure . . 13 4.1 General . . 13 4.2 Main data structure . 13 4.3 Bibliographic references. 14 4.4 Classes for attribute specification . . 15

13、4.5 Classes for codes of controlled vocabularies 16 4.6 Classes for identifiers . 17 5 Class descriptions 17 5.1 General . . 17 5.2 Classes for numerical and logical values . 18 5.3 Classes for text . 18 5.4 Class for date and time . 19 5.5 Code_ classes, for attributes based on controlled vocabular

14、ies 20 5.6 Id_ classes, for identifiers . 20 5.7 Aggregation class . 21 5.8 Allergen class, AllergenSpec class, Code_Allergen classes . . 21 5.9 ArticleInfo class . . 22 5.10 Claim class, Code_ClaimType class, Code_ClaimCode class . . 23 5.11 Code_SciName class 23 5.12 Composite class, Code_Strategy

15、 class, Code_SamplingMethod class . 23 5.13 Contact class . 24 5.14 Contributor class . . 24 5.15 Descriptor class, Code_Descriptor class 24 5.16 Food class . 25 5.17 Id_Food class . . 26 5.18 Image class. . 26 5.19 Ingredient class . 26 5.20 Mandate class . 27 5.21 Measure class, Id_Measure class,

16、Code_Action class . . 27 5.22 Method class, Code_MethType class, Code_MethInd class . 28 5.23 MethodStep class, Code_MethStep class . 28 5.24 MethodValidation class, Code_MethValidation class . . 29 5.25 Performance class 29 5.26 Place class, Code_PlaceType class . . 31 5.27 Preparation class, Code_

17、Preparation class 31 5.28 Programme class, Code_Programme class 31 5.29 Property class, Code_Property class . . 32 5.30 Quality class, Code_Quality class . 32 5.31 Quantity class . 33 5.32 Recipe class . . 33 5.33 Reference class, Code_RefType class . . 33 5.34 Sample class . 34 Copyright European C

18、ommittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16104:2012 EN 16104:2012 (E) 3 5.35 Source . . 34 5.36 TypedDate class, Code_Date class . 34 5.37 TypedValue class, Code_ValueType . 35 5.38 UoM

19、 class, Code_UoM class. . 35 5.39 Vocabulary class . 36 Data encoding . 36 6.1 General . . 36 6.2 Data instances with identity 36 6.3 Sequential order of XML elements . . 37 6.4 References to data instances . . 37 6.5 Data instances of class attributes . 37 6.6 XML schema datatypes . 38 6.7 Encoding

20、 of Decimal datatype class . 38 6.8 Encoding of Date datatype class . 38 6.9 Encoding of MultiText datatype class . 38 6.10 Encoding of Vocabulary class . 39 6.11 Encoding of Code_ classes 39 6.12 Encoding of list of valid values . 39 6.13 Encoding of identifiers 41 Annex A (informative) UML notatio

21、n . . 43 Annex B (informative) Examples of data instances . 44 B.1 Overview . . 44 B.2 Agreements between actors . . 44 B.3 Data instances and dataset . 48 B.4 Food description and food property measures 48 B.5 Aggregation of food property measures . 52 B.6 Food composite and food samples . 54 B.7 F

22、ood recipes . . 57 B.8 Food article with article information . . 60 Annex C (informative) XML schema and example of XML encoding . 63 C.1 General . . 63 C.2 XML schema . . 63 C.3 XML document example 64 Annex D (informative) Examples of controlled vocabularies . 66 D.1 General . . 66 D.2 Background

23、. 66 D.3 Food description . 66 D.4 Food classification 67 D.5 Food property description 68 D.6 Analytical methods 68 D.7 Geographic places and languages . . 69 D.8 Units of measure . 69 D.9 Other controlled vocabularies . 70 Bibliography 71 Copyright European Committee for Standardization Provided b

24、y IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16104:2012 EN 16104:2012 (E) 4 Foreword This document (EN 16104:2012) has been prepared by Technical Committee CEN/TC 387 “Food data”, thesecretariat of which is held by SIS. This Eur

25、opean Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn atthe latest by June 2013. Attention is drawn to the possibility that some of the elements o

26、f this document may be the subject of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the followingcountries are bound to implement this European S

27、tandard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Sp

28、ain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16104:2012 EN 16104:2012 (E) 5 Introduction The term food generally

29、 refers to substances intended for human consumption, normally with exceptions fore.g. medicines, and includes raw or processed food products and substances used in the manufacture. Theexact definition, however, may vary depending on legislation and cultural differences. This standard can beused reg

30、ardless of such variations. This standard uses food properties as a general term when describing food constituents such as nutrients,heavy metals, micro-organisms, but also when describing various physico-chemical properties of foods. Food data address description and identification of foods and the

31、ir food properties. They are needed and usedfor many purposes, e.g. labelling, product development, dietary treatment, nutritional treatment, consumerinformation, and research. Thus, there are many types of parties that need to generate, compile, interchange,or access detailed information about food

32、s. These include: Food manufacturers Food analysis laboratories AuthoritiesResearchersResellers Retailers Nutritionists/dieticians Food distributorsConsumers Restaurants/food service operators Software developers The ability and need to manage food information vary between these parties. There are m

33、ultiple instances ofall parties mentioned, which means that the information is interchanged in a large number of relationsbetween parties. For example, a food manufacturer may have the need to communicate food information withmultiple resellers, multiple retailers, multiple distributors and multiple

34、 authorities in multiple countries, and soon. Currently, there are differences among member states and parties in the way food data are expressed withrespect e.g. food description, definition of nutrients and other food properties, and methods used to generatecompositional values. A common European

35、Standard, established within the CEN framework, is a key toolenabling unambiguous identification and description of food data and its quality in e.g. databases, fordissemination and interchange. Several European and international initiatives have focused on improving and harmonising food datadescrip

36、tion and interchange. This standard is based on two initiatives: the EuroFIR project 11 (an ECNetwork of Excellence funded by the 6th Framework Programme for Research and technologicalDevelopment) 2005-2010 and Food and Beverage Extension to the GS1 GDSN Trade Item standard 14. Copyright European Co

37、mmittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16104:2012 EN 16104:2012 (E) 6 The Eurofir project mainly concerned specifications for documentation and interchange of data on nutrientsand bioa

38、ctive substances in food composition databases, while the GS1 standard was intended for use bytrading partners in both the food service as well as the food retail sector. In addition, a set of use cases weredeveloped and analysed. This standard was also aligned with the EFSA Standard Sample Descript

39、ion 17,and certain elements and specifications were incorporated. As a result, this standard is more innovative andbroader in scope - in so far as it should be fit for the purposes of all these parties. The main aim of the standard is to provide a framework that facilitates and enables generation, c

40、ompilation,dissemination and interchange of food data that are comparable and unambiguous with respect to the identityof foods, the description of foods and food property measures including their quality. The standard isstructured to be robust and flexible enough to incorporate future extensions wit

41、h respect to various types ofdata. This standard will make it possible for any party in a community to send understandable food data to any otherreceiving party in that community. However, this standard does not include all definitions that are required. Forexample, the set of food properties that c

42、an be used, such as contents of various nutrients and heavy metals,is not included in the standard. These and all other so called controlled vocabularies will be agreed uponwithin the community. An annex of the standard provides examples of required controlled vocabularies. The reasons for not inclu

43、ding the controlled vocabularies are: Most controlled vocabularies, for example with new food properties, will be constantly updated. Communities around the world are maintaining and using their own controlled vocabularies. The exchange of food data among different parties requires an agreement on n

44、ot only what data to exchangebut also on the encoding of the data. This standard includes data encoding rules based on XML which today isthe most recognised general technique for data encoding. Figure 1 illustrates a case where food data is exchanged between databases of partners (1) in some kind of

45、community. They want to use this standard to set up a mutual agreement (2). Apart from selecting thestandard (3), such an agreement will contain selections of controlled vocabularies and restrictions on data.Most of the data specified in the standard require a controlled vocabulary to be specified (

46、5). Such controlledvocabularies are maintained by various organisations. An agreement will select the controlled vocabularies touse. Restrictions on data will be defined (4). For example, an agreement may state that a scientific name hasto be provided for all foods, despite the fact that it is not r

47、equired in the standard. In addition, an agreementmay specify requirements on what food properties are to be exchanged or what language to use. Figure 1 Agreement for food data exchange (A) that are based on this standard (S) will also specifya set of controlled vocabularies (V). Copyright European

48、Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16104:2012 EN 16104:2012 (E) 7 1 Scope This European Standard specifies requirements on the structure and semantics of food datasets and ofinte

49、rchange of food data for various applications. Food data refers to information on various food properties and includes various steps in the generation andpublication of such data, e.g. sampling, analysis, food description, food property and value description. The standard regards food data as datasets covering: identificati