BS EN 13880-11-2003 Hot applied joint sealants - Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with as.pdf

《BS EN 13880-11-2003 Hot applied joint sealants - Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with as.pdf》由会员分享，可在线阅读，更多相关《BS EN 13880-11-2003 Hot applied joint sealants - Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with as.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13880-11:2003 Hot applied joint sealants Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements The European Standard EN 13880-11:2003 has the status of a British Standard ICS

2、93.080.20 BS EN 13880-11:2003 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 18 June 2003 BSI 18 June 2003 ISBN 0 580 42099 X National foreword This British Standard is the official English language version of EN 13880-11:2003. The UK parti

3、cipation in its preparation was entrusted by Technical Committee B/510, Road materials, to Subcommittee B/510/3, Materials for concrete roads, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The B

4、ritish Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards

5、Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the respo

6、nsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cov

7、er, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN1388011 June2003 ICS93

8、.080.20 Englishversion HotappliedjointsealantsPart11:Testmethodforthe preparationofasphalttestblocksusedinthefunctiontestand forthedeterminationofcompatibilitywithasphaltpavements ProduitsdescellementdejointsappliquschaudPartie 11:Mthodedessaipourlaprparationdesblocs asphaltiquesdestinsautestfonctio

9、nneletpourla dterminationdecompatibilitaveclesrevtements bitumineux HeiverarbeitbareFugenmassenTeil11:Prfverfahren zurHerstellungvonAsphaltProbekrpernzurVerwendung inderFunktionsprfungundzurBestimmungder VertrglichkeitmitAsphalten ThisEuropeanStandardwasapprovedbyCENon25March2003. CENmembersarebound

10、tocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEurop

11、eanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepu

12、blic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B10

13、50Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN1388011:2003EEN1388011:2003(E) 2 Contents page Foreword3 1 Scope 4 2 Normativereferences 4 3 Principle4 4 Apparatus .4 5 Asphalt5 6 Preparationandconditioningoftestmaterial . .5 7 Prepar

14、ationofasphaltfortestblocks .5 8 Preparationofthetestblocks 5 9 Storage5 10 Reportforasphaltblockspreparing 6EN1388011:2003(E) 3 Foreword Thisdocument(EN1388011:2003)hasbeenpreparedbyTechnicalCommitteeCEN/TC227“Roadmaterials“, thesecretariatofwhichisheldbyDIN. ThisEuropeanStandardshallbegiventhestat

15、usofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyDecember2003,andconflictingnationalstandardsshallbewithdrawnatthelatest byMarch2005. ThisEuropeanStandardisoneofaseriesofstandardsaslistedbelow: prEN138801 HotappliedjointsealantsPart1:Testmethodforthedeterminati

16、onofdensityat25C prEN138802 HotappliedjointsealantsPart2:Testmethodforthedeterminationofconepenetrationat 25C EN138803 HotappliedjointsealantsPart3:Testmethodforthedeterminationofpenetrationand recovery(resilience) EN138804 HotappliedjointsealantsPart4:Testmethodforthedeterminationofheatresistance C

17、hangeinpenetrationvalue prEN138805 HotappliedjointsealantsPart5:Testmethodforthedeterminationofflowresistance prEN138806 HotappliedjointsealantsPart6:Testmethodforthepreparationofsamplesfortesting prEN138807 HotappliedjointsealantsPart7:Functiontestingofjointsealants prEN138808 Hotappliedjointsealan

18、tsPart8:Testmethodforthedeterminationofthechangeinweight offuelresistancejointsealantsafterfuelimmersion EN138809 HotappliedjointsealantsPart9:Testmethodforthedeterminationofcompatibilitywith asphaltpavements prEN1388010 HotappliedjointsealantsPart10:Testmethodforthedeterminationofadhesionand cohesi

19、onfollowingcontinuousextensionandcompression EN1388011 HotappliedjointsealantsPart11:Testmethodforthepreparationofasphalttestblocks usedinthefunctiontestandforthedeterminationofcompatibilitywithasphaltpavement s prEN1388012 HotappliedjointsealantsPart12:Testmethodforthemanufactureofconcretetestblock

20、s forbondtesting(recipemethods) prEN1388013 HotappliedjointsealantsPart13:Testmethodforthedeterminationofthediscontinuous extension(adherencetest) AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Bel

21、gium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal, Slovakia,Spain,Sweden,SwitzerlandandtheUnitedKingdom.EN1388011:2003(E) 4 1Scope ThisEuropeanStandarddescribesamethodforpreparingasphaltblocksintendedfortestingofjoint

22、sealants accordingtoprEN138807andEN138809. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoo

23、rrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). EN12591, BitumenandbituminousbindersSpecificationforpavinggradebitumens. EN1269732, Bituminousmixtu

24、resTestmethodsforhotmixasphaltPart32:Laboratorycompactionof bituminousmixturesbyavibratorycompactor. prEN1269735, BituminousmixturesTestmethodsforhotmixasphaltPart35:Laboratorymixing. EN13043 ,Aggregatesforbituminousmixturesandsurfacetreatmentsforroads,airfieldandothertraffickedareas. prEN138807, Ho

25、tappliedjointsealantsPart7:Functiontestingofjointsealants. EN138809, HotappliedjointsealantsPart9:Testmethodforthedeterminationofcompatibilitywithasphalt pavements. ISO188, Rubber,vulcanizedorthermoplasticAcceleratedageingandheatresistancetests. 3Principle Hotmixasphalt,laboratorymixedordirectfroman

26、asphaltplant,isfilledintopaperboxesormetalcontainers, approximately10kgeach,heatedatspecifiedtemperatureandthentransferredtoamouldingboxandcompacted bymeansofavibratingmachinetoahomogenousasphaltblockinthemouldingbox.Aftercoolingtoroom temperaturetheasphaltblockshallbetakenoutandsawedtothesizesrequi

27、redforthespecimens. 4Apparatus 4.1 Heatingchamber,capableofheatingapproximately20kgasphaltto180C. 4.2 Mouldingbox,madeofsturdywoodorotherresistantmaterials.Themouldshallhaveadepthof100mm. NOTE Theotherdimensionsoftheboxdependonthenumberofspecimensneededfortesting. 4.3 Equipmenttocompacttheasphaltina

28、ccordancewithtoEN1 269732.EN1388011:2003(E) 5 5Asphalt ThequalityofthehotmixedasphaltshallbeinaccordancewithEN1269735.Whethertheasphaltislaboratory mixedorcomesdirectlyfromanasphaltplantitshallbeinaccordancewiththefollowingrecipe: bitumen:6,4(%bymass)inthemix; aggregate degradation: chippings 2/16mm

29、: 52(%inmass) sand 0,075/2mm: 38(%inmass) filler 0/0,075mm: 10(%inmass) total 0/16mm:100(%inmass); bitumen,penetrationgrade70/100accordingtoEN12591; aggregatesaccordingtoEN 13043. 6 Preparationandconditioningoftestmaterial Heattheasphaltstoredintheboxesinaheatingchamberupto180CinaccordancewithISO188

30、.Duringthe heatingtheasphaltshallremainintheboxesinwhichitwasdelivered.Theboxesshallbeclosedtopreventair enteringthebox. 7 Preparationofasphaltfortestblocks Whentheasphaltisheatedupto180CinaccordancewithISO188,moveittothemouldingboxwherethe asphaltisplacedandlevelledinsuchawayastogiveanexcessofappro

31、ximately10mm.Theasphaltisthen compactedbymeansofavibratingmachinetoahomogenouscompoundinaccordancewithEN1269732.Theair voidsshallbebetween2%and4%involume. 8 Preparationofthetestblocks Whentheasphaltblockhasbeencooled,takeitoutoftheboxandsawittotherequiredshapes: (75 1)mm(25,0 0,5)mm(12,0 0,5)mmforte

32、stspecimensinaccordancewithprEN138807; (100 1)mm(100 1)mm(100 1)mmfortestspecimensinaccordancewithEN138809. 9Storage Theasphaltspecimensshallbestoredinarefrigeratoratatemperaturebetween2Cand4Ctopreventthe samplesfromstickingtogetheruntilsuchtimeasthetestspecimensarepreparedinaccordancewith prEN13880

33、7andEN138809.EN1388011:2003(E) 6 10 Reportforasphaltblockspreparing a)mix composition; b) dateandtimeofproduction; c) originandsizedistributionoftheaggregates; d) dateofpreparationandtimeofstorageoftheasphaltblocks; e) thenameofthepreparatorandlaboratory.blankBS EN 13880-11:2003 BSI 389 Chiswick Hig

34、h Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amen

35、dment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard w

36、ould inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the l

37、atest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In

38、response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards th

39、rough its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members

40、of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding onl

41、ine access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the inter

42、national standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Thi

43、s does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.