BS EN 12238-2001 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application《建筑物通风 空调终端设备 混流设施的空气动力学试验和额定值》.pdf

《BS EN 12238-2001 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application《建筑物通风 空调终端设备 混流设施的空气动力学试验和额定值》.pdf》由会员分享，可在线阅读，更多相关《BS EN 12238-2001 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application《建筑物通风 空调终端设备 混流设施的空气动力学试验和额定值》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 12238:2001 Ventilation for buildings Air terminal devices Aerodynamic testing and rating for mixed flow application The European Standard EN 12238:2001 has the status of a British Standard ICS 91.140.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS E

2、N 12238:2001 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 16 October 2001 BSI 16 October 2001 ISBN 0 580 38234 6 National foreword This Brit

3、ish Standard is the official English language version of EN 12238:2001. The UK participation in its preparation was entrusted to Technical Committee RHE/2, Air distribution and air diffusion, which has the responsibility to: A list of organizations represented on this committee can be obtained on re

4、quest to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of

5、 the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.

6、aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document

7、comprises a front cover, an inside front cover, the EN title page, pages 2 to 33 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NOR

8、M EN 12238 August 2001 ICS 91.140.30 English version Ventilation for buildings Air terminal devices Aerodynamic testing and rating for mixed flow application Ventilation des btiments Bouches dair Essais arodynamiques et caractrisation pour applications en diffusion mlange Lftung von Gebuden Luftdurc

9、hlsse Aerodynamische Prfung und Bewertung fr Anwendung bei Mischstrmung This European Standard was approved by CEN on 29 June 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stan

10、dard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other lan

11、guage made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, I

12、celand, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of exploit

13、ation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12238:2001 EEN 12238:2001 (E) 2 Contents Page Foreword. 3 1 Scope . 4 2 Normative references . 4 3 Terms, definitions and symbols 4 3.1 Functional characteristics of air terminal devices . 4 3.2 Symbols 8 4 I

14、nstrumentation. 10 4.1 Airflow rate measurement. 10 4.2 Pressure measurement. 10 4.3 Temperature measurements. 11 4.4 Velocity measurements. 11 5 Testing of pressure and air velocity v k(first test installation) 11 5.1 Measurement of pressure requirement for a supply air terminal device. 11 5.1.1 Ge

15、neral . 11 5.1.2 Measurement of static gauge pressure p swith the first test installation A 12 5.1.3 Direct measurement of total pressure p twith the first test installation A. 12 5.1.4 Measurement of static pressure p swith the first test installation B . 13 5.1.5 Presentation of total pressure p t

16、13 5.2 Measurement of pressure requirement for an exhaust air terminal device 14 5.2.1 Procedure 14 5.2.2 Measurement of static pressure with the first test installation C for exhaust air terminal device (excluding air transfer devices). 15 5.2.3 Direct measurement of total pressure with the first t

17、est installation C, for exhaust air terminal device. 15 5.2.4 Measurement of static pressure with the first test installation D for exhaust air terminal device . 16 5.2.5 Presentation of total pressure p t16 5.3 Determination of air velocity v kand the corresponding area A kfor the air terminal devi

18、ce (not mandatory) . 17 5.3.1 Principle 17 5.3.2 Test installation . 17 5.3.3 Test procedure 17 5.3.4 Correction of flow rates to standard air conditions 18 5.3.5 Calculation of A k18 6 Test to measure the isothermal air discharge characteristics of a supply air terminal device (second test installa

19、tion) 18 6.1 Test measurements 18 6.2 Test room 18 6.3 Test room equipment and instrumentation . 19 6.4 Installation of the air terminal device. 19 6.4.1 Classification of air terminal devices. 19 6.4.2 Mounting of air terminal devices . 19 6.4.3 Test duct and flow rate 19 6.5 Test procedure 20 6.6

20、Determination of isothermal performance. 20 6.6.1 Test measurements 20 6.6.2 Determination of the main air stream direction . 20 6.6.3 Measurement of air stream velocities . 21 6.6.4 Determination of throw 21 6.6.5 Determination of spread 22 6.6.6 Determination of rise and drop 22 Annex A (normative

21、) Alternative exploratory technique for determination of throw, spread and drop . 28 A.1 Scope 28 A.2 Determination of the point of maximum velocity. 28 A.3 Determination of points at envelope velocity 29 A.4 Determination of spread 29 A.5 Determination of the rise and drop 29 A.6 Number of determin

22、ations. 29EN 12238:2001 (E) 3 Foreword This European Standard has been prepared by Technical Committee CEN/TC 156, Ventilation for buildings, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text o

23、r by endorsement, at the latest by February 2002, and conflicting national standards shall be withdrawn at the latest by February 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Au

24、stria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.EN 12238:2001 (E) 4 1 Scope This European Standard specifies methods for the laboratory aerodynamic testing

25、 and rating of air terminal devices for mixed flow applications, including the specification of suitable test facilities and measurement techniques. The standard gives only tests for the assessment of characteristics of the air terminal devices under isothermal conditions. The testing of low velocit

26、y air terminal devices is specified in EN 12239. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dat

27、ed references the subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). CR 12792, Ventilation f

28、or buildings Symbols and terminology. EN 12239, Ventilation for buildings Air terminal devices Aerodynamic testing and rating for displacement flow applications. prEN 13182:1998, Ventilation for buildings Instrumentation requirements for air velocity measurements in ventilated spaces. ISO 3966, Meas

29、urement of fluid flow in closed conduits Velocity area method using Pitot static tubes. EN ISO 5167-1, Measurement of fluid flow by means of pressure differential devices Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full (ISO 5167-1:1991). 3 T

30、erms, definitions and symbols For the purposes of this standard, the terms and definitions given in CR 12792, together with the following, apply. 3.1 Functional characteristics of air terminal devices NOTE The acroynym ATD is used to signify an air terminal device. 3.1.1 nominal size of an air termi

31、nal device nominal value of dimensions of the duct into which the air terminal device is to be fitted NOTE For an air diffuser, the nominal size is generally known as neck size. 3.1.2 core and specific areas 3.1.2.1 core of an air terminal device that part of an air terminal device located within a

32、convex closed surface of minimum area, inside which are all the openings of the air terminal device through which the air can passEN 12238:2001 (E) 5 3.1.2.2 free area (of an air terminal device) sum of the smallest areas of the cross-section of all openings of the air terminal device 3.1.2.3 core o

33、f a grille that part of a grille located inside a convex closed plane curve of minimum length of contour, inside which are all the openings of the grille 3.1.2.4 core area (of a grille) area limited by the plane curve defined in 3.1.2.3 3.1.2.5 free area (of a grille) sum of the minimum measured are

34、as of each opening through which the air can pass 3.1.2.6 free area ratio (of a grille) ratio of the free area to the core area 3.1.2.7 effective area of an air terminal device A k quotient resultant from measured airflow rate and measured air velocity as determined in a specified manner with a spec

35、ified instrument 3.1.3 aspect and vane ratios 3.1.3.1 aspect ratio (of a rectangular air terminal device) ratio of the larger side to the smaller side of the rectangular core 3.1.3.2 vane ratio (of a grille) ratio of the chord length to the vane pitch 3.1.4 special terms relating to air 3.1.4.1 stan

36、dard air atmospheric air having a density of 1,2 kg m -3at 20 C, 101 325 Pa (1 013,25 mbar) and 65 % Relative Humidity 3.1.4.2 supply air air entering a supply air terminal device from an upstream duct 3.1.4.3 induced air airflow induced by the supply air from a supply air terminal device 3.1.4.4 ex

37、haust air air leaving an exhaust air terminal device into a downstream duct 3.1.5 specific terms relating to air diffusion rating 3.1.5.1 mean measured air temperature of the occupied zone arithmetical average of the measured values of air temperature within the occupied zoneEN 12238:2001 (E) 6 3.1.

38、5.2 supply temperature differential algebraic difference between the supply air temperature and the mean measured air temperature of the occupied zone 3.1.5.3 exhaust temperature differential algebraic difference of the exhaust air temperature and the mean measured air temperature of the occupied zo

39、ne 3.1.5.4 temperature differential within the occupied zone largest value of the difference between measured air temperatures within the occupied zone 3.1.5.5 primary airflow rate volume of air entering a supply air terminal device in unit time from an upstream duct 3.1.5.6 exhaust airflow rate vol

40、ume of air leaving an exhaust air terminal device in unit time 3.1.5.7 local air velocity magnitude of the time-averaged vector of velocity at a point of an air stream The velocity vector (and therefore its three mutually perpendicular components u, v, w) in any point of a turbulent stream is submit

41、ted to fluctuations with respect to time. The time-averaged vector of velocity is a vector for which each component is averaged with respect to time. The components being: TT T ; wdt T w ; vdt T v ; udt T u 00 0 1 1 1 the local air velocity is therefore: w+ v+ u 2 2 2 3.1.5.8 local measured air velo

42、city measured value of local air velocity 3.1.5.9 treated space enclosure served by an air distribution system NOTE In this standard the treated space is the test room described in 6.2. 3.1.5.10 envelope geometrical surface in a treated space where the local measured air velocity has the same value

43、and is the reference velocity associated with this envelope 3.1.5.11 room air velocity value of velocity conventionally derived from the various local measured air velocities within the occupied zone 3.1.5.12 free area velocity primary airflow rate divided by the free area of a supply air terminal d

44、evice or exhaust airflow divided by the free area of an exhaust air terminal deviceEN 12238:2001 (E) 7 3.1.5.13 throw (for a supply air terminal device) maximum distance between the centre of the core and a plane which is tangent to a specified envelope, such as 0,25 m s -1 , 0,5 m s -1 , etc., and

45、the centre of the core 3.1.5.14 drop (for a supply air terminal device) vertical distance between the lowest horizontal plane tangent to a specified envelope, such as 0,25 m s -1 , 0,5 m s -1 , etc., and the centre of the core 3.1.5.15 rise (for a supply air terminal device) vertical distance betwee

46、n the highest horizontal plane tangent to a specified envelope, such as 0,25 m s -1 , 0,5 m s -1 , etc., and the centre of the core 3.1.5.16 spread (for a supply air terminal device) maximum distance between two vertical planes tangent to a specified envelope, such as 0,25 m s -1 , 0,5 m s -1 , etc.

47、, and perpendicular to a plane through the centre of the core There can be two different spreads, which are not always equal: one for the left side, the other for the right side (considered when looking at the treated space from the supply air terminal device). 3.1.5.17 occupied zone (for laboratory

48、 purposes) portion of the treated space geometrically limited to be no closer than 0,15 m to all walls and within a height of 1,8 m above the floor 3.1.5.18 slot air terminal device device with single or multiple components with aspect ratio (the ratio of length to width of the enclosed rectangular

49、opening) of 10:1 or greater for each slotEN 12238:2001 (E) 8 3.2 Symbols The symbols used in this standard are given in Table 1. Table 1 Symbols Symbol Quantity SI unit A Area m 2 A d Area corresponding to the cross section of the nominal size of the duct to which the device is fitted (neck area) m 2 A f Free area m 2 A k Effective area (k-factor area) k v v q m 2 b R Width of test room or installation m D e Equivalent diameter d A 4 m D h Hydraulic diameter peri