BS EN 754-1-2016 Aluminium and aluminium alloys Cold drawn rod bar and tube Technical conditions for inspection and delivery《铝和铝合金 冷拉杆材 棒材和管材 检验和交货用技术条件》.pdf

《BS EN 754-1-2016 Aluminium and aluminium alloys Cold drawn rod bar and tube Technical conditions for inspection and delivery《铝和铝合金 冷拉杆材 棒材和管材 检验和交货用技术条件》.pdf》由会员分享，可在线阅读，更多相关《BS EN 754-1-2016 Aluminium and aluminium alloys Cold drawn rod bar and tube Technical conditions for inspection and delivery《铝和铝合金 冷拉杆材 棒材和管材 检验和交货用技术条件》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 754-1:2016Aluminium and aluminium alloys Cold drawn rod/bar and tubePart 1: Technical conditions for inspection and deliveryBS EN 754-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 754-1:2016. It supersedes BS EN 754-1:2008

2、 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee NFE/35, Light metals and their alloys.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary prov

3、isions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 90366 3 ICS 77.150.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publ

4、ished under the authority of the Standards Policy and Strategy Committee on 31 March 2016.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 754-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 754-1 March 2016 ICS 77.150.10 Supersedes EN 754-1:2008English Version Alumini

5、um and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery Aluminium et alliages daluminium - Barres et tubes tirs - Partie 1: Conditions techniques de contrle et de livraison Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil

6、 1: Technische Lieferbedingungen This European Standard was approved by CEN on 10 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d

7、ate lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio

8、n under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fo

9、rmer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMI

10、T EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 754-1:2016 EBS EN 754-1:2016EN 754-1:2016 (E) 2 Content

11、s Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 5 4 Ordering information 5 5 Requirements . 7 5.1 Production and manufacturing processes . 7 5.2 Quality control . 7 5.3 Chemical composition limits . 7 5.4 Mechanical properties . 7 5.5 Freedom from surface de

12、fects 7 5.6 Tolerances on dimensions and form 8 5.7 Stress corrosion cracking resistance . 8 5.8 Additional requirements 8 6 Test procedures . 8 6.1 Sampling . 8 6.2 Test methods . 10 6.3 Re-tests 11 7 Inspection documents 12 8 Marking of products 12 9 Packaging 12 10 Arbitration 12 Annex A (normati

13、ve) Location of test pieces 13 Annex B (normative) Resistance to stress-corrosion cracking for alloy EN AW-7075 in tempers T73, T7351, T73510 and T73511 Electrical conductivity 16 Bibliography . 17 BS EN 754-1:2016EN 754-1:2016 (E) 3 European foreword This document (EN 754-1:2016) has been prepared

14、by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2016, and conflicting natio

15、nal standards shall be withdrawn at the latest by September 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supers

16、edes EN 754-1:2008. Within its programme of work, Technical committee CEN/TC 132 entrusted CEN/TC 132/WG 5 “Extruded and drawn products“ to revise EN 754-1:2008. The following technical modifications have been introduced during the revision: In the Normative references clause, EN 10002-1 was replace

17、d by EN ISO 6892-1. EN 754, Aluminium and aluminium alloys Cold drawn rod/bar and tube comprises the following parts: Part 1: Technical conditions for inspection and delivery Part 2: Mechanical properties Part 3: Round bars, tolerances on dimensions and form Part 4: Square bars, tolerances on dimens

18、ions and form Part 5: Rectangular bars, tolerances on dimensions and form Part 6: Hexagonal bars, tolerances on dimensions and form Part 7: Seamless tubes, tolerances on dimensions and form Part 8: Porthole tubes, tolerances on dimensions and form According to the CEN/CENELEC Internal Regulations, t

19、he national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

20、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 754-1:2016EN 754-1:2016 (E) 4 1 Scope This European Standard specifies the technical conditions for inspection and delivery of alumin

21、ium and aluminium alloy cold drawn rod/bar and tube for general engineering applications. This document applies to products which are extruded and then cold drawn. This document does not apply to: forging stock (EN 603), products delivered in coils (EN 13958), coiled tubes cut to length (EN 13958).

22、2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amend

23、ments) applies. EN 515, Aluminium and aluminium alloys Wrought products Temper designations EN 573-3, Aluminium and aluminium alloys Chemical composition and form of wrought products Part 3: Chemical composition and form of products EN 754-2, Aluminium and aluminium alloys Cold drawn rod/bar and tub

24、e Part 2: Mechanical properties EN 754-3, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 3: Round bars, tolerances on dimensions and form EN 754-4, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 4: Square bars, tolerances on dimensions and form EN 754-5, Aluminium a

25、nd aluminium alloys Cold drawn rod/bar and tube Part 5: Rectangular bars, tolerances on dimensions and form EN 754-6, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 6: Hexagonal bars, tolerances on dimensions and form EN 754-7, Aluminium and aluminium alloys - Cold drawn rod/bar and

26、 tube - Part 7: Seamless tubes, tolerances on dimensions and form EN 754-8, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 8: Porthole tubes, tolerances on dimensions and form EN 2004-1, Aerospace series Test methods for aluminium and aluminium alloy products Part 1: Determination o

27、f electrical conductivity of wrought aluminium alloys EN 10204, Metallic products Types of inspection documents EN 12258-1:2012, Aluminium and aluminium alloys Terms and definitions Part 1: General terms BS EN 754-1:2016EN 754-1:2016 (E) 5 EN 14242, Aluminium and aluminium alloys Chemical analysis I

28、nductively coupled plasma optical emission spectral analysis EN 14361, Aluminium and aluminium alloys Chemical analysis Sampling from metal melts EN ISO 6506-1, Metallic materials Brinell hardness test Part 1: Test method (ISO 6506-1) EN ISO 6892-1, Metallic materials Tensile testing Part 1: Method

29、of test at room temperature (ISO 6892-1) ISO 9591, Corrosion of aluminium alloys Determination of resistance to stress corrosion cracking ASTM G47, Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminium Alloy Products 3 Terms and definitions For t

30、he purposes of this document, the terms and definitions given in EN 12258-1:2012 and the following apply. 3.1 order document document or set of documents agreed between supplier and purchaser at the time of ordering SOURCE: EN 13957:2008, 3.1 4 Ordering information The order document shall contain t

31、he following: a) form and type of product: 1) form of the product (cold drawn rod/bar or tube). If tube, whether seamless or porthole/bridge; 2) reference to EN 573-3 for chemical composition limits; 3) reference to EN 515 for temper designation; 4) purchaser application, in particular whether subse

32、quent anodising is intended. This shall be clearly stated on the order document; b) reference to EN 754-2 for mechanical property limits; c) a reference to this document (EN 754-1); d) dimensions and shape of the product: 1) round tube: i) length; and only two of the following dimensions: BS EN 754-

33、1:2016EN 754-1:2016 (E) 6 ii) outside diameter; iii) inside diameter; iv) the tolerances for outside or inside diameter shall state as to whether the proposed tolerances are mean or inclusive of ovality (i.e. the maximum allowable deviation at any point from the specified diameter. If this is not ma

34、de clear on the order, then the supplier shall assume that the specified tolerances for either or both outside and inside diameters are inclusive of ovality. However, if the purchaser specifically requires that the outside and/or inside diameter tolerances must be both mean and inclusive of ovality

35、then this shall be clearly stated on the order; v) wall thickness; 2) round bar: i) diameter; ii) length; 3) square and hexagonal bar: i) width across flats; ii) length; 4) rectangular bar: i) width; ii) thickness; iii) length; 5) all other cases: i) drawing of cross section; ii) length; e) toleranc

36、es on dimensions and form, with reference to the appropriate European Standard and/or a drawing; f) quantity: 1) mass; 2) number of pieces; 3) total length; 4) tolerance on quantity; g) any requirements for inspection documents; h) any special requirements agreed between supplier and purchaser: BS E

37、N 754-1:2016EN 754-1:2016 (E) 7 1) marking of products; 2) reference to drawings, part numbers, etc.; 3) additional or special testing, e.g. stress corrosion testing; 4) surface finish requirements; 5) surface protection; 6) packaging; 7) inspection prior to delivery; 8) use of A50mmvalue instead of

38、 A value for elongation; i) for products intended to be anodised by the purchaser, the order document shall also contain the information about the intended particular surface treatment with reference to the relevant European Standard. 5 Requirements 5.1 Production and manufacturing processes Unless

39、otherwise specified in the order document, the production and manufacturing processes shall be left to the discretion of the manufacturer. Unless it is explicitly stated in the order document, no obligation shall be placed on the manufacturer to use the same processes for subsequent or similar order

40、s. 5.2 Quality control The supplier shall be responsible for the performance of all inspection and tests required by the relevant European Standard and/or the particular specification prior to shipment of the product. If the purchaser wishes to inspect the product at the manufacturers works, he shal

41、l notify the supplier at the time of placing the order. 5.3 Chemical composition limits The chemical composition limits shall be in conformity with the requirements specified in EN 573-3. If the purchaser requires closer limits for elements than those specified in the above standard, these limits sh

42、all be according to an agreement between supplier and purchaser and stated in the order document. 5.4 Mechanical properties The mechanical properties shall be in conformity with those specified in EN 754-2 or those agreed between supplier and purchaser and stated in the order document. Typical Brine

43、ll hardness values are given in EN 754-2, but they are not binding for acceptance purposes. However, a Brinell hardness value may be agreed upon for acceptance testing. 5.5 Freedom from surface defects The surface shall be free from defects prejudicial to its suitable and proper use. BS EN 754-1:201

44、6EN 754-1:2016 (E) 8 The product shall have a smooth and clean surface. However, small surface defects such as light scratches, indentations, laminations, discolouration and non-uniform surface appearance resulting from heat-treatment, etc., which cannot always be totally avoided, are generally perm

45、itted on the product surface. Whilst an operation designed to mask a fault is not permitted, the elimination of a superficial fault is permissible provided that the dimensional tolerances and material properties continue to meet the specification. For products intended for surface treatment, the sup

46、erficial defects (discolouration, mechanical or structural) shall not be so extensive as to impair the decorative appearance of the surface after the agreed surface treatment. Limiting samples may be agreed between supplier and purchaser. 5.6 Tolerances on dimensions and form For the different forms

47、 of products, if not otherwise agreed between supplier and purchaser, the tolerances on dimensions and form shall be in conformity with the relevant European Standards EN 754-3, EN 754-4, EN 754-5, EN 754-6, EN 754-7 and EN 754-8. Unless otherwise agreed, the purchaser may reject only those products

48、 having dimensions not complying with the specified tolerances. 5.7 Stress corrosion cracking resistance The products of alloy EN AW-7075, in tempers T73, T7351, T73510 and T73511, for thicknesses equal to or greater than 20 mm, shall exhibit no evidence of stress corrosion cracking when tested in a

49、ccordance with ASTM G47 or ISO 9591 in the transverse direction at a stress level of 75 % of the specified Rp0,2. If such testing is required this has to be specified in the order document. 5.8 Additional requirements Any additional requirements shall be agreed between supplier and purchaser and stated in the order document. 6 Test procedures 6.1 Sampling 6.1.1 Samples for chemical analysis Sampling shall be carried out at the time of casting according to EN 14361. The average content o