BS EN 4074-2009 Aerospace series - Screws pan head six lobe recess coarse tolerance normal shank medium length thread in titanium alloy aluminium IVD coated - Classification 1100 M.pdf

《BS EN 4074-2009 Aerospace series - Screws pan head six lobe recess coarse tolerance normal shank medium length thread in titanium alloy aluminium IVD coated - Classification 1100 M.pdf》由会员分享，可在线阅读，更多相关《BS EN 4074-2009 Aerospace series - Screws pan head six lobe recess coarse tolerance normal shank medium length thread in titanium alloy aluminium IVD coated - Classification 1100 M.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 4074:2009ICS 49.030.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated Classification: 1 100 MPa (at ambient tem

2、perature) / 425 nullCLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 July 2009 BSI 2009ISBN 978 0 580 68667 2Amendments/corrigenda issued since

3、publicationDate CommentsBS EN 4074:2009National forewordThis British Standard is the UK implementation of EN 4074:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee c

4、an be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CH

5、INA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSIBS EN 4074:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4074 July 2009 ICS 49.030.20 English Version Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, al

6、uminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 C Srie arospatiale - Vis tte cylindrique, empreinte six lobes, tige normale tolrance large, filetage moyen, en alliage de titane, revtues daluminium IVD - Classification: 490 MPa ( temprature ambiante) / 425 C Luft- und Ra

7、umfahrt - Flachkopfschrauben mit Sechs-Bogenzahn, mit mittlerer Gewindelnge, aus Titanlegierung, Aluminium IVD beschichtet - Klasse: 1 100 MPa (bei Raumtemperatur) / 425 C This European Standard was approved by CEN on 6 June 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulat

8、ions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This Eu

9、ropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the

10、national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland

11、and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4074

12、:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSIBS EN 4074:2009EN 4074:2009 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Required characteristics .5 4 Designation 8 5 Marking .8 6 Technical specification .8 Licensed Co

13、py: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSIBS EN 4074:2009EN 4074:2009 (E) 3 Foreword This document (EN 4074:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carr

14、ied out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either b

15、y publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or C

16、ENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, De

17、nmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/1

18、1/2009 08:14, Uncontrolled Copy, (c) BSIBS EN 4074:2009EN 4074:2009 (E) 4 1 Scope This standard specifies the characteristics of screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa 1) / 425 C 2)2 N

19、ormative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Mar

20、king of aerospace products. EN 3911, Aerospace series Six lobe recess Geometrical definition. 3)EN 9100, Aerospace series Quality management systems Requirements (based on ISO 9001:2000) and Quality systems Model for quality assurance in design, development, production, installation and servicing (b

21、ased on ISO 9001:1994). EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts. ISO 3353-1, Aerospace Lead and runout threads Part 1: Rolled external threads. ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts. ISO 7913, Ae

22、rospace Bolts and screws, metric Tolerances of form and position. ISO 9152, Aerospace Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa Procurement specification. TR 3775, Aerospace series Bolts and pins Materials. 4) MIL-DTL-83488D, Coating, aluminum, high purity. 5)NAS 1800-90,

23、Recess, six lobe drive Internal Dimensions for recess and gages. 6) 1) Minimum tensile strength of the material at ambient temperature. 2) Maximum temperature that the screw can withstand without continuous change in its original characteristics, after return to ambient temperature. The maximum temp

24、erature is determined by the surface treatment. 3) Published as ASD Prestandard at the date of publication of this standard. 4) Published as ASD Technical Report at the date of publication of this standard. 5) Published by: Department of Defense (DoD), the Pentagon, Washington,DC 20301, USA. 6) Publ

25、ished by: Aerospace Industries Association of America, Inc. (AIA), 1250 Eye Street, NW; Suite 1100, Washington, DC 20005, USA. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSIBS EN 4074:2009EN 4074:2009 (E) 5 3 Required characteristics 3.1 Configura

26、tion Dimensions Masses See Figure 1 and Table 1. Dimensions and tolerances are expressed in millimetres and apply after surface treatment. 3.2 Tolerances of form and position ISO 7913 and those specified in Figure 1 and Table 1. 3.3 Materials TR 3775 (titanium alloy, classification 1 100 MPa). 3.4 S

27、urface treatment MIL-DTL-83488D, Type II, class 3, 4 m to 12 m. After aluminium deposit: a) mechanical blasting, followed by a chromate conversion coating within 24 h max. 7); b) optional lubrication with cethylic alcohol (code E). 7) Products used shall be in conformity with national regulation int

28、o force. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSIBS EN 4074:2009EN 4074:2009 (E) 6 Values in micrometres apply prior to surface treatment. Break sharp edges 0,1 to 0,4. Key 1 1 hole D7 optional 2 Pitch diameter 3 Thread 4 Conforms to ISO 335

29、3-1 5 Marking 6 Two holes D5 optional 7 Three holes D5 optional 8 Radius or chamfer Figure 1 3,2 1,6 0,8 Configuration for diameter codes 030 and 040Configuration for diameter codes 050 to 200 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSIBS EN 40

30、74:2009EN 4074:2009 (E) 7 Table 1 Diameter code Thread aD1D2D3D4D5D6D7E G H h12 h13 nom. Tol. min. H13 max. H13 nom. Tol. nom. Tol. 030 MJ30,5 - 4h6h 3 5,5 2,3 0 0,5 5,07 1 3,4 1,5 0 0,2 0,3 3 h13 040 MJ40,7 - 4h6h 4 7 3 6,53 3,9 1,1 2 0,4 4 050 MJ50,8 - 4h6h 5 8,5 3,4 0,5 8,03 5,1 1,5 2,5 0,5 5 060

31、 MJ61 - 4h6h 6 10 4,2 9,38 1,4 6,3 3 0 0,3 0,6 6 h14080 MJ81 - 4h6h 8 13 6,2 12,33 7,5 1,9 4 0,8 8 100 MJ101,25 - 4h6h 10 16 7,9 15,331,6 10,2 2,4 5 0 0,5 1 10 120 MJ121,25 - 4h6h 12 18 9,8 17,23 13,8 6 1,2 12 Diameter code K L1 0,2b, cL2L3R W Recess Mass d 0,1 Length code nom. max. min. EN 3911 cod

32、e NAS 1800 number ef030 0,9 002 to 030 2 to 30 7,5 0,4 0,2 T10 0,59 0,031 040 1,4 002 to 040 2 to 40 10 6 0,22 25 1,28 0,056 050 1,6 003 to 050 3 to 50 12 7,5 0,5 0,3 27 2,58 0,087 060 2 003 to 060 3 to 60 14 8,5 0,7 0,5 T30 3,94 0,126 080 2,4004 to 080 4 to 80 16,5 10,5 0,2745 8,75 0,224 100 005 to

33、 100 5 to 100 20,5 13 0,8 0,6 T50 16,61 0,349 120 006 to 120 6 to 120 22,5 14,5 0,9 T55 24,43 0,503 aIn accordance with ISO 5855-2. bIncrements: - 1 for L1 30; - 2 for 30 100. cIf greater lengths are required, they shall be chosen using the above increments. The length code corresponds to the length

34、 L1, completed by one or two zeros to the left, where necessary, to obtain a three digit code. dApproximate values (kg/1 000 pieces), calculated on the basis of 4,45 kg/dm3, given for information purposes only. They apply to screws without holes. e Value for head and first L4.f Increase for each add

35、itional millimetre of L4. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSIBS EN 4074:2009EN 4074:2009 (E) 8 4 Designation EXAMPLE Description block SCREW Identity block EN4074H050040E Number of this standard Hole code (see Table 2) Diameter code (se

36、e Table 1) Length code (see Table 1) Lubrication code (see 3.4) NOTE If necessary the originator code I9005 should be placed between the description block and the identity block. Table 2 Holes Code Lockwire H Split pin D Lockwire and split pin C No hole (hyphen) 5 Marking See Table 3 and Figure 1. T

37、able 3 Diameter code EN 2424 Style 030 and 040 N 050 to 120 B 6 Technical specification ISO 9152, except for clauses: a) Approval of manufacturers: see EN 9100; b) Qualification of bolts: see EN 9133. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSI

38、BS EN 4074:2009This page has been intentionally left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSIBS EN4074:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards Inst

39、itutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should

40、make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeerespo

41、nsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BS

42、I, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI

43、policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. V

44、arious BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial disc

45、ounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BS

46、I is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced,

47、stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or gra

48、de designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/11/2009 08:14, Uncontrolled Copy, (c) BSI