BS EN 1501-3-2008 Refuse collection nvehicles and their nassociated lifting ndevices — General nrequirements and safety requirements nPart 3 Front loaded refuse collection nvehicle.pdf

《BS EN 1501-3-2008 Refuse collection nvehicles and their nassociated lifting ndevices — General nrequirements and safety requirements nPart 3 Front loaded refuse collection nvehicle.pdf》由会员分享，可在线阅读，更多相关《BS EN 1501-3-2008 Refuse collection nvehicles and their nassociated lifting ndevices — General nrequirements and safety requirements nPart 3 Front loaded refuse collection nvehicle.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN1501-3:2008ICS 43.160NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDRefuse collectionvehicles and theirassociated liftingdevices Generalrequirements andsafety requirementsPart 3: Front loaded refuse collectionvehiclesLicensed Copy: Wang Bin, ISO/EXCHANGE C

2、HINA STANDARDS, 03/06/2009 07:37, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 28 February2009 BSI 2009ISBN 978 0 580 54294 7Amendments/corrigenda issued since publicationDate CommentsBS EN 1501-3:2008National forewor

3、dThis British Standard is the UK implementation of EN 1501-3:2008.The UK participation in its preparation was entrusted to TechnicalCommittee B/508/1, Waste containers and associated lifting devices onrefuse collection vehicles.A list of organizations represented on this committee can be obtained on

4、request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03

5、/06/2009 07:37, Uncontrolled Copy, (c) BSIBS EN 1501-3:2008EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1501-3March 2008ICS 43.160English VersionRefuse collection vehicles and their associated lifting devices -General requirements and safety requirements - Part 3: Frontloaded refuse collection

6、vehiclesBennes de collecte des dchets et leurs lve-conteneursassocis - Exigences gnrales et exigences de scurit -Partie 3: Bennes chargement frontalAbfallsammelfahrzeuge und die dazugehrigenSchttungen - Allgemeine Anforderungen undSicherheitsanforderungen - Teil 3: FrontladerThis European Standard w

7、as approved by CEN on 12 January 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such na

8、tionalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and n

9、otified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma

10、lta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploi

11、tation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1501-3:2008: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2009 07:37, Uncontrolled Copy, (c) BSIBS EN 1501-3:2008EN 1501-3:2008 (E) 2 Contents Page Foreword4 Introduction .5 1 Scope 6 2 Normat

12、ive references 6 3 Terms and definitions .8 4 Modes and controls of front loaded RCV12 5 List of significant hazards 14 6 Safety requirements 20 7 Verification .37 8 Information for use 41 Annex A (normative) Definition of working and functional spaces .46 Annex B (normative) Examples of data sheet4

13、8 Annex C (informative) Types of systems for front loaded RCVs: lifting devices, compaction and discharge systems and types of waste containers54 Annex D (normative) Warning signals 60 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 9

14、8/37/EC, amended by 98/79/EC61 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .62 Bibliography 63 Figures Figure A.1 Side view of a front loaded RCV 46 Figure A.2 Top view of a front loaded RCV .47 Figure B.1 Example of da

15、ta sheet. Dimensions, volumes and centres of gravity.48 Figure B.2.1 Example of data sheet - Axle load calculation 49 Figure B.2.2.1 Lateral tipping edge at outer tire .50 Figure B.2.2.2 Rear tipping edge at centre line of the most rear axle 50 Figure B.2.2 Example of data sheet - Calculation of sid

16、e and rear stability on fully tipped body / bodywork51 Figure B.2.3.1 Longitudinal stability 52 Figure B.2.3.2 Lateral stability 52 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2009 07:37, Uncontrolled Copy, (c) BSIBS EN 1501-3:2008EN 1501-3:2008 (E) 3 Figure B.2.3. Example of data s

17、heet - Stability calculation in container lifting mode 53 Figure C.1 Types of lifting devices for front loaded RCV 54 Figure C.2 Types of compaction systems.55 Figure C.3 Types of discharge systems 56 Figure C.4 Recommended types of waste containers .57 Figure C.5 Description of forks 58 Figure C.6

18、Types of top doors 59 Figure D.1 Warning signal for extending lifting devices60 Tables Table 1 List of significant hazards .14 Table 2 Graphical symbols26 Table 3 Verification 37 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2009 07:37, Uncontrolled Copy, (c) BSIBS EN 1501-3:2008EN 15

19、01-3:2008 (E) 4 Foreword This document (EN 1501-3:2008) has been prepared by Technical Committee CEN/TC 183 “Waste management”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorseme

20、nt, at the latest by September 2008, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for ident

21、ifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative Annexes ZA and ZB, whi

22、ch are an integral part of this document. The minimum essential criteria are considered to be of primary importance in providing safe, serviceable, economical, and practical front loaded refuse collection vehicles. This European Standard is one part of the series of coordinated standards EN 1501 abo

23、ut “Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements” comprising the following parts: Part 1: Rear-end loaded refuse collection vehicles, as amended by A1: Footboards (under revision) Part 2: Side loaded refuse collection vehicles Part 3:

24、 Front loaded refuse collection vehicles Part 4: Noise test code for refuse collection vehicles Part 5: Lifting devices for refuse collection vehicles (under preparation) This European Standard is the third one of a series of standards dealing with specification, design, safety and testing of refuse

25、 collection vehicles (RCVs) and their associated lifting devices. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Fi

26、nland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2009 07:37, Unco

27、ntrolled Copy, (c) BSIBS EN 1501-3:2008EN 1501-3:2008 (E) 5 Introduction This document is a type C standard as stated in EN ISO 12100-1. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions o

28、f this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. The series

29、 of standards should be read in conjunction with the documents developed by CEN/TC 183/WG 1 for mobile waste containers (according to the series of standards EN 840), for stationary waste containers (according to the series of standards EN 12574) and for selective collection containers emptied by th

30、e top (Type B of EN 13071) that are compatible with some of the lifting devices specified in this standard (see Figure C.4). While producing this standard it was assumed that: only persons who have been appropriately trained will operate the front loaded RCV; the guidelines issued by the chassis man

31、ufacturer have been taken into account; components without specific requirements are designed in accordance with the usual engineering practice and calculation codes, including all failure modes, of sound mechanical and electrical construction and made of materials with adequate strength and of suit

32、able quality; harmful materials, such as asbestos, are not used as part of the machine; components are kept in good repair and working order, so that the characteristics, within the specified limits as stated in the maintenance manual, remain despite wear; by design of the load bearing elements, a s

33、afe operation of the machine is assured for loading ranging from zero to 100 % of the rated capacities; the equipment has been designed for operation with an ambient temperature between 25 C and 40 C; specific uses and operating conditions of the machinery are taken into account by negotiation betwe

34、en the manufacturer and the user (for example: type of waste, extended temperature range, type of driving conditions). The standard is designed for careful consideration by designers, manufacturers, suppliers and users of the front loaded RCV. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 0

35、3/06/2009 07:37, Uncontrolled Copy, (c) BSIBS EN 1501-3:2008EN 1501-3:2008 (E) 6 1 Scope This standard applies to front loaded refuse collection vehicles, as defined in 3.2, and specifies their technical requirements. This standard deals with all significant hazards, hazardous situations and events

36、relevant to the front loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard part 3 describes and gives the requirements of the front loaded RCV and the associated lifting device(s) and refers to part

37、4 of this series of standards for the noise test code. Examples for standard types of front loaded refuse collection vehicles are given in Annex C. This European Standard is not applicable to: operation in severe conditions (e.g. extreme environmental conditions such as: temperatures below 25 C and

38、above 40 C, corrosive environment, tropical environment, lightning, wind velocity in excess of 75 km/h); operation subject to special rules (e.g. potentially explosive atmospheres, contaminating environments); transportation of passengers, lifting of persons; loading by crane; loading by satellite v

39、ehicle; containers other than defined in EN 840-1 to -4, EN 12574-1 to -3 and type B of EN 13071; handling of loads the nature of which could lead to dangerous situations such as hot wastes, acids and bases, radioactive materials, especially fragile loads, explosives. This document is not applicable

40、 to machinery which is manufactured before the date of its publication by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the ref

41、erenced document (including any amendments) applies. EN 294, Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs EN 349, Safety of machinery - Minimum gaps to avoid crushing of parts of the human body EN 574, Safety of machinery - Two-hand control devices -

42、 Functional aspects - Principles for design EN 811, Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs EN 840-1, Mobile waste containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design EN 840-

43、2, Mobile waste containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design EN 840-3, Mobile waste containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trun

44、nion and/or comb lifting devices - Dimensions and design Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2009 07:37, Uncontrolled Copy, (c) BSIBS EN 1501-3:2008EN 1501-3:2008 (E) 7 EN 840-4, Mobile waste containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with fl

45、at lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design EN 842, Safety of machinery - Visual danger signals - General requirements, design and testing EN 894-1, Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part

46、1: General principles for human interactions with displays and control actuators EN 894-2, Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays EN 894-3, Safety of machinery - Ergonomics requirements for the design of displays and control

47、actuators - Part 3: Control actuators EN 953, Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards EN 982, Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics EN 983, Safety of machinery - Safe

48、ty requirements for fluid power systems and their components - Pneumatics EN 1032, Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value EN 1037, Safety of machinery - Prevention of unexpected start-up EN 1050:1996, Safety of machinery - Principles for

49、 risk assessment EN 1088:1995, Safety of machinery - Interlocking devices associated with guards - Principles for design and selection EN 1501-4, Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles EN 1837, Safety of machinery - Integral lighting of machines EN 12574-1, Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s