BS EN 124-6-2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP) polyethylene (PE) or unplasticized poly(vinyl.pdf

《BS EN 124-6-2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP) polyethylene (PE) or unplasticized poly(vinyl.pdf》由会员分享，可在线阅读，更多相关《BS EN 124-6-2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP) polyethylene (PE) or unplasticized poly(vinyl.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationGully tops and manhole tops for vehicular and pedestrian areasPart 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)BS EN 124-6:2015BS EN 124-6:2015 BRITISH STANDARDNational forewordThis British Standar

2、d is the UK implementation of EN 124-6:2015.Together with BS EN 124-1:2015, BS EN 124-2:2015, BS EN 124-3:2015,BS EN 124-4:2015 and BS EN 124-5:2015, it supersedes BS EN 124:1994which is withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee B/505, Wastewater engineeri

3、ng, to Subcommittee B/505/4,“Manhole Covers, Surface Boxes And Other Road Fittings”.A list of organizations represented on this subcommittee can beobtained on request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for it

4、s correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 79322 6ICS 93.080.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and S

5、trategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affectedEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORM EN 124-6 June 2015 ICS 93.080.30 Supersedes EN 124:1994English Version Gully tops and manhole tops for vehicular and pedestrian areas -Part 6: Gully tops

6、and manhole tops made of polypropylene(PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) Dispositifs de couronnement et de fermeture pour les zonesde circulation utilises par les pitons et les vhicules -Partie 6 : Dispositifs de couronnement et de fermeture enpolypropylne (PP), po

7、lythylne (PE) ou polychlorure de vinyle non plastifi (PVC-U) Aufstze und Abdeckungen fr Verkehrsflchen - Teil 6:Aufstze und Abdeckungen aus Polypropylen (PP),Polyethylen (PE) oder weichmacherfreiem Polyvinylchlorid (PVC-U) This European Standard was approved by CEN on 12 March 2015. CEN members are

8、bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the

9、CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre

10、has the samestatus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,Lux

11、embourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and UnitedKingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brusse

12、ls 2015 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members. Ref. No. EN 124-6:2015 EEN 124-6:2015 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols and abbreviations .7 3.1 Terms and definitions .7 3.2

13、Symbols and abbreviations 8 4 Materials .8 4.1 General 8 4.2 Combination of elements made of different materials.9 4.3 UV stability (artificial weathering resistance) .9 4.3.1 General 9 4.3.2 Carbon black requirements for UV resistant PE and PP 10 4.3.3 Titanium dioxide requirements for UV resistant

14、 PVC-U . 10 4.4 Metallic fixing 10 5 Requirements 10 5.1 Design and performance requirements 10 5.2 Material specific characteristics for gully tops and manhole tops made of PE, PP, and PVC-U . 11 5.2.1 Reaction to fire 11 5.2.2 Effect of heating 11 5.2.3 Deflection under load . 12 5.2.4 Impact resi

15、stance 12 5.2.5 Durability . 12 5.2.6 Dangerous substances 13 6 Testing . 13 6.1 General . 13 6.2 Effect of heating 13 6.3 Deflection under load . 13 6.4 Impact resistance 13 7 Assessment and verification of constancy of performance AVCP . 14 7.1 General . 14 7.2 Type testing . 15 7.2.1 General . 15

16、 7.2.2 Test samples, testing and compliance criteria 15 7.2.3 Test reports . 17 7.2.4 Shared other party results . 17 7.3 Factory production control (FPC) . 18 7.3.1 General . 18 7.3.2 Requirements 18 7.3.3 Product specific requirements 21 7.3.4 Initial inspection of factory and of FPC 22 7.3.5 Cont

17、inuous surveillance of FPC . 22 7.3.6 Procedure for modifications 23 8 Designation . 23 9 Marking 24 Annex A (normative) Characteristics of glass fibres used for reinforcement of PP polymer 26 BS EN 124-6:2015EN 124-6:2015 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms, de

18、finitions, symbols and abbreviations .7 3.1 Terms and definitions .7 3.2 Symbols and abbreviations 8 4 Materials .8 4.1 General 8 4.2 Combination of elements made of different materials.9 4.3 UV stability (artificial weathering resistance) .9 4.3.1 General 9 4.3.2 Carbon black requirements for UV re

19、sistant PE and PP 10 4.3.3 Titanium dioxide requirements for UV resistant PVC-U . 10 4.4 Metallic fixing 10 5 Requirements 10 5.1 Design and performance requirements 10 5.2 Material specific characteristics for gully tops and manhole tops made of PE, PP, and PVC-U . 11 5.2.1 Reaction to fire 11 5.2.

20、2 Effect of heating 11 5.2.3 Deflection under load . 12 5.2.4 Impact resistance 12 5.2.5 Durability . 12 5.2.6 Dangerous substances 13 6 Testing . 13 6.1 General . 13 6.2 Effect of heating 13 6.3 Deflection under load . 13 6.4 Impact resistance 13 7 Assessment and verification of constancy of perfor

21、mance AVCP . 14 7.1 General . 14 7.2 Type testing . 15 7.2.1 General . 15 7.2.2 Test samples, testing and compliance criteria 15 7.2.3 Test reports . 17 7.2.4 Shared other party results . 17 7.3 Factory production control (FPC) . 18 7.3.1 General . 18 7.3.2 Requirements 18 7.3.3 Product specific req

22、uirements 21 7.3.4 Initial inspection of factory and of FPC 22 7.3.5 Continuous surveillance of FPC . 22 7.3.6 Procedure for modifications 23 8 Designation . 23 9 Marking 24 Annex A (normative) Characteristics of glass fibres used for reinforcement of PP polymer 26 BS EN 124-6:2015EN 124-6:2015 (E)

23、3 Annex B (normative) Test of deflection under load 27 B.1 Test samples 27 B.2 Deflection test load, FD. 27 B.3 Apparatus . 27 B.3.1 Testing machine 27 B.3.2 Test blocks . 27 B.3.3 Deflection measurement device(s) 27 B.4 Procedure . 27 B.4.1 Procedure for testing rectangular and circular covers/grat

24、ings 27 B.4.2 Procedure for testing multiple and triangular covers/gratings 28 B.4.3 Observations and reporting . 28 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation 29 ZA.1 Scope and relevant characteristics . 29 ZA.2 Proc

25、edures for AVCP of gully tops and manhole tops made of PP, PE or PVC-U) 31 ZA.2.1 Systems of AVCP 31 ZA.2.2 Declaration of performance (DoP) . 33 ZA.3 CE marking and labelling 35 Bibliography 38 BS EN 124-6:2015EN 124-6:2015 (E) 4 Foreword This document (EN 124-6:2015) has been prepared by Technical

26、 Committee CEN/TC 165 “Wastewater engineering”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2015 and conflicting national standards shall be w

27、ithdrawn at the latest by March 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate

28、given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Regulation (EU) No. 305/2011. For relationship with EU Regulations, see informative Annex ZA, which is an integral part of this document. Together with EN 124-1:2015, EN 124-2:

29、2015, EN 124-3:2015, EN 124-4:2015 and EN 124-5:2015, the document will supersede EN 124:1994. EN 124, Gully tops and manhole tops for vehicular and pedestrian areas, consists of the following parts: Part 1: Definitions, classification, general principles of design, performance requirements and test

30、 methods; Part 2: Gully tops and manhole tops made of cast iron; Part 3: Gully tops and manhole tops made of steel or aluminium alloys; Part 4: Gully tops and manhole tops made of steel reinforced concrete; Part 5: Gully tops and manhole tops made of composite materials; Part 6: Gully tops and manho

31、le tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U). According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,

32、Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Un

33、ited Kingdom. BS EN 124-6:2015EN 124-6:2015 (E) 4 Foreword This document (EN 124-6:2015) has been prepared by Technical Committee CEN/TC 165 “Wastewater engineering”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publicati

34、on of an identical text or by endorsement, at the latest by December 2015 and conflicting national standards shall be withdrawn at the latest by March 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall

35、not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Regulation (EU) No. 305/2011. For relationship with EU Re

36、gulations, see informative Annex ZA, which is an integral part of this document. Together with EN 124-1:2015, EN 124-2:2015, EN 124-3:2015, EN 124-4:2015 and EN 124-5:2015, the document will supersede EN 124:1994. EN 124, Gully tops and manhole tops for vehicular and pedestrian areas, consists of th

37、e following parts: Part 1: Definitions, classification, general principles of design, performance requirements and test methods; Part 2: Gully tops and manhole tops made of cast iron; Part 3: Gully tops and manhole tops made of steel or aluminium alloys; Part 4: Gully tops and manhole tops made of s

38、teel reinforced concrete; Part 5: Gully tops and manhole tops made of composite materials; Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U). According to the CEN-CENELEC Internal Regulations, the national standards organi

39、zations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, M

40、alta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 124-6:2015EN 124-6:2015 (E) 5 1 Scope This European Standard applies to manhole tops and gully tops made of Polypropylene (PP), Polyethylene (PE) or unplasticize

41、d poly(vinyl chloride) (PVC-U) by a moulding or extrusion process, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic. It is applicable to manhole tops and gully tops

42、for use in areas which can only be used by pedestrians and pedal cyclists (class A 15), and pedestrian areas and comparable areas, car parks or car parking decks (class B 125). This European Standard gives guidance for combinations of covers/grating made of PP, PE or PVCU with frames according to EN

43、 124-2, EN 124-3, EN 124-4 and EN 124-5. This European Standard is not applicable in isolation but only in combination with EN 124-1. This European Standard is not applicable to: rodding point covers according to EN 13598-1; gratings/covers as part of prefabricated drainage channels according to EN

44、1433; floor and roof gullies in buildings which are specified in EN 1253 (all parts); surface boxes. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cite

45、d applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 124-1:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 1: Definitions, classification, general principles of design, performance requirements and test meth

46、ods EN 124-2:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 2: Gully tops and manhole tops made of cast iron EN 124-3:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 3: Gully tops and manhole tops made of steel or aluminium alloys EN 124-4:2015, G

47、ully tops and manhole tops for vehicular and pedestrian areas Part 4: Gully tops and manhole tops made of steel reinforced concrete EN 124-5:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 5: Gully tops and manhole tops made of composite materials EN 513:1999, Unplasticized

48、 polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors Determination of the resistance to artificial weathering EN 1401-1, Plastics piping systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fit

49、tings and the system BS EN 124-6:2015EN 124-6:2015 (E) 6 EN 1852-1, Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) Part 1: Specifications for pipes, fittings and the system EN 12164:2011, Copper and copper alloys Rod for free machining purposes EN 12200-1, Plastics rainwater piping systems for above ground external use Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system EN 12666-1:2005+A1:2011, Plastics piping