BS 9210 N001-1-1975 Detail specification for radio frequency connectors (type BNC) - Sealed soldered captive contact 50 ohms - Full assessment level《射频连接器(BNC型)的详细规范 50Ω的密封、焊接、静态接触.pdf

《BS 9210 N001-1-1975 Detail specification for radio frequency connectors (type BNC) - Sealed soldered captive contact 50 ohms - Full assessment level《射频连接器(BNC型)的详细规范 50Ω的密封、焊接、静态接触.pdf》由会员分享，可在线阅读，更多相关《BS 9210 N001-1-1975 Detail specification for radio frequency connectors (type BNC) - Sealed soldered captive contact 50 ohms - Full assessment level《射频连接器(BNC型)的详细规范 50Ω的密封、焊接、静态接触.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 9210 N001-1:1975 Detail specification forradio frequency connectors (Type BNC) Sealed,soldered, captive contact, 50 7 Fullassessment level UDC 621.37/.39:621.315.683BS9210N001-1:1975 BSI 04-2000 ISBN 0 580 09042 6 A British Standard does not purport to include all the necessary p

2、rovisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to21 an

3、d a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBS9210N001-1:1975 BSI 04-2000 i Contents Page 1 Physical ch

4、aracteristics 1 2 Ratings (including limiting conditions of use) and characteristics 2 3 Related documents 3 4 Additional information (not for inspection purposes) 3 5 Marking of the connectors and packages 3 6 Ordering information 3 7 Control drawings 3 8 Inspection requirements 3 Appendix A Outlin

5、e drawings 16 Appendix B Metal panel piercing details and overlap dimension (panel thickness 0.76/3.30) 21ii blankBS9210N001-1:1975 BSI 04-2000 1 1 Physical characteristics 1.1 ELECTRONIC COMPONENTS OF ASSESSED QUALITY: DETAIL SPECIFICATION Typical outline, styles 01-03 and 06-02 RADIO FREQUENCY CON

6、NECTOR FULL ASSESSMENT LEVEL TYPE BNC SEALED, SOLDERED, CAPTIVE CONTACT, 50 7 For other styles and dimensions seeAppendix A Connector style Description Mass (Grams) Max. Connector variant Cables BS 2316/URM No Matched 01-03 Connector coupler, free, straight 15 AG a AH 72, 108 AJ 43, 76 05-03 Connect

7、or fixed, single-hole mounting, solder bucket 12 AK 301 AL a 06-02 Connector free, straight 20 AM a Unmatched 07-03 Connector fixed, straight, single-hole mounting, cable outlet 22 BD 200 BF 201, 202, 207, 208 BH 104, 106 08-02 Connector free, right angle 35 BJ 70, 210 BK 90, 117, 306 BM 203, 205 ZZ

8、 Equipment wire 18-05 Adaptor connector fixed, straight, single-hole mounting 18 a See BS 9210, Appendix P. NOTEFor covers electrically protective see BS 9210 N003 AppendixA, style 96-12 and style 97-12BS9210N001-1:1975 2 BSI 04-2000 1.2 Body finish. Silver NOTEGalvanic corrosion may occur when conn

9、ectors with dissimilar finishes are mated. 1.3 Centre contact finish. Silver 2 Ratings (including limiting conditions of use) and characteristics Nominal characteristic impedance 50 7 Reflection coefficient (and VSWR) max. Matched variants Unmatched variants Up to 1 GHz Up to 3 GHz not measured a) S

10、traight cable outlet styles 0.024 (1.05) 0.091 (1.20) b) Adaptor, straight 0.048 (1.10) 0.130 (1.30) c) Solder-bucket styles Not measured Capacitance (maximum) (solder-bucket styles only) 5 pF R.F.shunt res (minimum) (solder-bucket styles only) 1 M7 at 30 MHz Working voltage (d.c.or a.c.peak) Inner

11、conductor to shell a) At sea level 500 V b) At altitude of 26 km 125 V Proof voltage (d.c.or a.c.peak) a) At sea level 2 kV b) At altitude of 26 km 500 V Current rating maximum 1 A d.c. Power rating a Before conditioning After conditioning Contact resistance, maximum 2 m7 7 m7 Outer conductor contin

12、uity, maximum 2 m7 7 m7 Insulation resistance, minimum 5 G7 500 M7 Vibration severity frequency range 10 Hz to 500 Hz displacement 0.75 mm) acceleration 98 m/s 2 )Cross over at approximately 60 Hz duration 6 hours) Shock severity 490 m/s 2for 11 ms Bump severity 4000 at 390 m/s 2 Climatic category 5

13、5/155/56 Resistance to test prod damage test Applicable a NOTEAs power is dependent on frequency and cable type, for information on power rating refer to the manufacturer.BS9210N001-1:1975 BSI 04-2000 3 3 Related documents BS 2011, Methods for the environmental testing of electronic components and e

14、lectronic equipment. BS 2316, Radio frequency cables. BS 6001, Sampling procedures and tables for inspection by attributes. BS 9000, General requirements for electronic components of assessed quality. BS 9210, Radio frequency connectors of assessed quality: generic data and methods of test. 4 Additi

15、onal information (not for inspection purposes) For panel piercing details and overlap dimension seeAppendix B. 5 Marking of the connectors and packages The marking of the component and package shall be in accordance with 1.1.6 of BS9210. Assembly and cable mounting instructions are to be included in

16、 every individual package of connector piece parts. 6 Ordering information In accordance with the requirements of 1.1.15 of BS9210, orders for connectors and their accessories covered by this specification shall contain the following information: a) The number of this specification i.e.BS9210 N001 b

17、) Style as in 1.1 e.g.06-02. c) Variant as in 1.1 e.g.AH. d) Climatic category i.e.55/155/56. e) Any additional information, e.g.fixing hole details, any special marking or packaging requirements. Example: BS 9210 N001/06-02/AH/55/155/56 7 Control drawings Control drawings, BS 9210 N001-2, are avail

18、able from BSI. NOTENormally required by manufacturer and inspectorates only. 8 Inspection requirements 8.1 Unless otherwise stated in the table of tests the provisions of8.2, 8.3, 8.4 and8.5 shall apply. 8.2 Contact resistance and outer conductor continuity for each mated pair shall be measured usin

19、g the “light current” method specified in 1.2.4.3.3 1) of BS9210. When testing the outer conductor continuity of panel mounted styles, where the connector shell is electrically connected to a mounting plate (see 1.2.1.1 of BS9210) the continuity test shall include a measurement between cable braid(s

20、) and the mounting plate. The initial resistance for each mated pair of contacts or any other conductor path shall not exceed2m7. Measurement after conditioning shall not exceed7m7. 8.3 Insulation resistance measurements between inner conductor and shell shall be made at500 50 V d.c.BS9210N001-1:197

21、5 4 BSI 04-2000 8.4 Voltage proof measurements shall be made at2 0.1 kV d.c.or peak a.c. (40 Hz to 60 Hz). There shall be no breakdown or flashover. 8.5 The sealing test shall be carried out with the lower pressure at the mating face, using a pressure differential of10001100 mbars. The leakage rate

22、shall be less than1cm 3 /h. 8.6 For tests in subgroups C3, C5, D3(iii), D3(v) involving exposure to the upper temperature category it is essential that cable having a compatible temperature capability shall be used. 8.7 Sample submitted to tests which are marked as (D) shall not be accepted for rele

23、ase under BS9000 (see2.6.5 of BS9000-1). 8.8 The tests or measurements prescribed in BS9210 after environmental conditionings are omitted between the environmental conditionings where these form part of a sequence in accordance with 1.2.6 of BS9210. The appropriate tests are included at the end of e

24、ach test sequence. Inspection BS 9210:1971 reference and conditions of test Performance requirements GROUP A To be applied on a sampling basis lot-by-lot (except subgroup A0). Subgroups A2, A3 and A4 are not applicable. Subgroup A0 Visual examination 1.2.2 1) 100% inspection As in 1.2.2 1) of BS 921

25、0 Either on assembled components or on contentsof packages. Subgroup A1 Inspection level S-3, AQL1.5% Visual examination 1.2.2 2) Either on assembled components or on contentsof packages As in 1.2.2 2) of BS 9210 Subgroup A5 CTR information 1.1.11 Attributes information forsubgroup A1 GROUP B To be

26、applied on a sampling basis lot-by-lot. Subgroups B3, B5, B6 and B7 are not applicable. (Thespecimens used for subgroups B1 and B2 may also be used for subgroupB4) Subgroup B1 Inspection level S-3, AQL1% Compatibility, mechanical (assurance) 1.2.5.9 2) As in 1.2.5.9 2) of BS 9210BS9210N001-1:1975 BS

27、I 04-2000 5 Inspection BS 9210:1971 reference and conditions of test Performance requirements Subgroup B2 (D) Inspection level S-3, AQL4% Soldering 1.2.6.1 Bit size 3 mm Iron size (b) Inner contact There shall be no damage or loosening of parts Insulation resistance 1.2.4.6 As in8.3 of this specific

28、ation W 5 G7 Voltage proof 1.2.4.7 As in8.4 of this specification As in8.4 of this specification Sealing (excluding panel seal) 1.2.6.11 As in8.5 of this specification As in8.5 of this specification Subgroup B4 (D) Inspection level S-3, AQL4% Engagement and separation 1.2.5.5 Coupling torque Max. 25

29、0 mN m Min. 70 mN m Gauge retention force 1.2.5.2 See control drawings BS9210 N001-2 for detailsof gauges As in 1.2.5.2 of BS 9210 Subgroup B8 CTR information 1.1.11 Attributes information for subgroups B1, B2 and B4 GROUP C Applied at three monthly intervals except when group D tests are due. Inadd

30、ition the issue number of the manufacturers drawing list shall be checked against that in the approval application or certificate. Specimens used for subgroups C1 may also be used for C3 and C5. Subgroups C2 and C4 are not applicable. Subgroup C1 Inspection level S-3, AQL1% Outline dimensions and ma

31、ss 1.2.3.1 As specified in1.1 andAppendix A, of this specificationBS9210N001-1:1975 6 BSI 04-2000 Inspection BS 9210:1971 reference and conditions of test Performance requirements Subgroup C3 (D) Inspection level S-3, AQL4% 8.6, 8.8 and note 1, of this specification apply to tests in this subgroup T

32、est prod damage 1.2.5.7 Moment 55 mN m Details of the test prod and gauges for this test are givenincontrol drawings. BS9210 N001-2. As in 1.2.5.7 of BS9210 followed by Rapid change oftemperature 1.2.6.9 55 C to +155 C As in 1.2.6.9 of BS 9210 followed by Damp heat, steady state 1.2.6.8 Severity 40

33、2 C for21days. Polarizing voltages 60 5 V d.c. Inner conductor to be positive.Working voltage500 50 V d.c. ora.c.peak. As in 1.2.6.8 of BS 9210 Final measurements Contact resistance 1.2.4.3 As in8.2 of this specification As in8.2 of this specification Outer conductor continuity 1.2.4.4 As in8.2 of t

34、his specification As in8.2 of this specification Insulation resistance 1.2.4.6 As in8.3 of this specification W 500 M7 Voltage proof As in8.4 of this specification As in8.4 of this specification Visual inspection 1.2.2 As in 1.2.2 of BS 9210 Engagement and separation 1.2.5.5 Coupling torques Max. 25

35、0 mM m Min. 70 mM mBS9210N001-1:1975 BSI 04-2000 7 Inspection BS 9210:1971 reference and conditions of test Performance requirements Subgroup C5 (D) Inspection level S-3, AQL4% 8.6, 8.8 and note 1, of this specification apply to tests in this subgroup Mechanical endurance 1.2.7.1 50 operations only

36、at not more than 15 per minute. As in 1.2.7.1 of BS 9210 followed by High temperature endurance 1.2.7.2 Severity 155 5 C for 250 hours with no electrical load. As in 1.2.7.2 of BS 9210 Final measurements Insulation resistance 1.2.4.6 As in8.3 of this specification W 500 M7 Contact resistance 1.2.4.3

37、 As in8.2 of this specification As in8.2 of this specification Outer continuity 1.2.4.4 As in8.2 of this specification As in8.2 of this specification Voltage proof 1.2.4.7 As in8.4 of this specification As in8.4 of this specification Sealing (all seals) 1.2.6.11 As in8.5 of this specification As in8

38、.5 of this specification Subgroup C6 CTR information 1.1.11 Attributes information for subgroups C3 and C5. GROUP D (D) D3 tests are to be performed at 3 year intervals. In addition, the issue number of the manufacturers drawing list shall be checked against that in the approval application or certi

39、ficate. Subgroups D1 and D2 are not applicable. Specimens D3 (i): 3 sets of piece partsfor a connector in eachstyle and variant Accept on one failureBS9210N001-1:1975 8 BSI 04-2000 Inspection BS 9210:1971 reference and conditions of test Performance requirements GROUP D (D) (contd) The minimum numbe

40、r of specimens (mating pairs) required for each of the remaining subgroups is: D3 (ii) 15 subsequently used for D3 (iv) Accept on one failure D3 (iii) 15 subsequently subdivided and used as follows: Accept on one failure D3 (vii) : 1 No failure permitted D3 (viii) : 2 No failure permitted D3 (ix) :

41、5 Accept on one failure D3 (x) : 7 Accept on one failure D3 (v) : 15 Accept on one failure D3 (vi) : 15 Accept on one failure Subgroup D3 (i) Dimensions and materials (piece parts) 1.2.3.2 Three sets of piece parts foraconnector in each styleand variant It is notnecessary to repeat measurements on c

42、ommon piece parts from the same source of manufacture. As in 1.2.3.2 of BS 9210 Subgroup D3 (ii) Outline dimensions and mass 1.2.3.1 As specified in1.1 andAppendix A of this specification. Compatibility mechanical 1.2.5.9 i) Using compatibility gauges specified in the control drawings BS 9210 N001-2

43、 As in 1.2.5.9 i) of BS 9210 Subgroup D3 (iii) (D) 8.6, 8.8 and note 1, of thisspecification apply toalltests in this subgroup Contact and insert retention 1.2.5.3 Axial forces (1) 22 1 N (2) 67 1 N As in 1.2.5.3 of BS 9210. Permanent displacement of contactu 0.30 mm Permanent displacement of insert

44、u 0.25 mm followed byBS9210N001-1:1975 BSI 04-2000 9 Inspection BS 9210:1971 reference and conditions of test Performance requirements Subgroup D3 (iii) (D) (contd) Reflection coefficient 1.2.4.1 (See note 2 of this specification). Frequency range of measurement up to1 GHz and up to 3 GHz As in 2 of

45、 this specification followed by Partial discharge 1.2.4.12 Extinction voltage shall beW 200 V followed by Bump 1.2.6.3 With appropriate cable from1.1 of this specification. Free length ofcable200300 mm. Acceleration 390 m/s 2 . 400 10. Temperature22.5 7.5 C. Cables to be clamped in axial alignment20

46、0 1 mm from cable entry. Permissible change in circuit resistance u 10 k7 Permissible duration of changeu 10 4s followed by Vibration 1.2.6.4 With appropriate cable from1.1 of this specification. Free length ofcable 200300 mm. Procedure A. Frequency range10Hz to500Hz. Displacement amplitude 0.75 mm

47、(upto60 Hz) and acceleration amplitude 98m/s 2(above 60 Hz). Duration of sweep 30minutes. Duration of test6 hours. Temperature22.5 7.5 C. Cables to be clamped onstationary support 200 1 mm from cable entry. Permissible change in circuit resistance u 10 k7 Permissible duration of changeu 10 4s follow

48、ed by Shock 1.2.6.5 With appropriate cable from1.1 of this specification. Free length of cable 200300 mm. Severity 490 m/s 2for11 ms. Temperature22.5 7.5 C. Cables to be clamped in axial alignment200 1 mm from cable entry. Permissible change in circuit resistance u 10 k7 Permissible duration of chan

49、geu 10 4sBS9210N001-1:1975 10 BSI 04-2000 Inspection BS 9210:1971 reference and conditions of test Performance requirements Subgroup D3 (iii) (D) (contd) Intermediate measurement Visual inspection 1.2.2 As in 1.2.2 1) and2) of BS9210. No mechanical damage, movement or displacement of parts. followed by Rapid change of temperature 1.2.6.9 (See8.6 of this specification) 55 C and+155 C No measurements atthisstage followed by Climatic sequence 1.2.6.7.6 Procedure1 Severity 55/155/56 As in 1.2.6.7.6 of BS 9210 Final measu