BS 6356-6-1992 Spraying equipment for crop protection Specification for connecting dimensions for nozzles with bayonet fixing《农作物保护用喷雾设备 第6部分 带插接固定装置喷嘴连接尺寸规范》.pdf

《BS 6356-6-1992 Spraying equipment for crop protection Specification for connecting dimensions for nozzles with bayonet fixing《农作物保护用喷雾设备 第6部分 带插接固定装置喷嘴连接尺寸规范》.pdf》由会员分享，可在线阅读，更多相关《BS 6356-6-1992 Spraying equipment for crop protection Specification for connecting dimensions for nozzles with bayonet fixing《农作物保护用喷雾设备 第6部分 带插接固定装置喷嘴连接尺寸规范》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 6356-6: 1992 ISO 10626: 1991 Spraying equipment for crop protection Part 6: Specification for connecting dimensions for nozzles with bayonet fixing UDC 631.348.45:632.98BS6356-6:1992 This British Standard, having been prepared under the directionof the Agricultural Machinery and

2、Implements Standards Policy Committee, waspublished under the authorityof the Standards Boardand comes into effect on 15September 1992 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference AGE/15 Draft for comment 90/81522 DC ISBN 0 580 21153 3 Committees

3、responsible for this British Standard The preparation of this British Standard was entrusted by the Agricultural Machinery and Implements Standards Policy Committee (AGE/-) to Technical Committee AGE/15, upon which the following bodies were represented: Agricultural Engineers Association British Agr

4、ochemicals Association Ltd. British Crop Protection Council British Plastics Federation Health and Safety Executive Imperial College of Science and Technology Long Ashton Research Station Ministry of Agriculture, Fisheries and Food National Farmers Union Silsoe Research Institute Amendments issued s

5、ince publication Amd. No. Date CommentsBS 6356-6:1992 BSI 08-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope 1 2 Normative reference 1 3 Dimensions 1 Figure 1 1 List of references Inside back coverBS 6356-6:1992 ii BSI 08-1999 National foreword This Part o

6、f BS 6356 has been prepared under the direction of the Agricultural Machinery and Implements Standards Policy Committee. It is identical with ISO 10626 Equipment for crop protection Spayers Connecting dimensions for nozzles with bayonnet fixings. A British Standard does not purport to include all th

7、e necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International Standard Corresponding British Standard ISO 8169:1984 BS 6356 Sp

8、raying equipment for crop protection Part 2:1985 Specification for connecting dimensions for nozzles and manometers (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages1 and 2, an inside back cover and a back cover. This standard has been u

9、pdated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS 6356-6:1992 BSI 08-1999 1 1 Scope This International Standard specifies the connecting dimensions for nozzles with bayonet fixing to allow interchangeabili

10、ty. It applies to flat spraying nozzles with bayonet fixing for agricultural sprayers. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was v

11、alid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International St

12、andards. ISO 8169:1984, Equipment for crop protection Sprayers Connecting dimensions for nozzles and manometers. 3 Dimensions Connecting dimensions for flat spraying nozzles with bayonet fixing shall be those given in Figure 1. For dimensions of nozzle body, see ISO 8169. Figure 1 2 blankBS 6356-6:1

13、992 BSI 08-1999 List of references See national foreword.BS 6356-6: 1992 ISO 10626: 1991 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the

14、international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services

15、. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual upd

16、ating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for

17、 international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and i

18、ts Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and

19、 receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the in

20、ternationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. T

21、his does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.