BS 6356-5-1992 Spraying equipment for crop protection - Specification for tank nominal volume and filling hole diameter《农作物保护用喷雾设备 第5部分 药罐公称容积和注液孔直径规范》.pdf

《BS 6356-5-1992 Spraying equipment for crop protection - Specification for tank nominal volume and filling hole diameter《农作物保护用喷雾设备 第5部分 药罐公称容积和注液孔直径规范》.pdf》由会员分享，可在线阅读，更多相关《BS 6356-5-1992 Spraying equipment for crop protection - Specification for tank nominal volume and filling hole diameter《农作物保护用喷雾设备 第5部分 药罐公称容积和注液孔直径规范》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 6356-5: 1992 ISO 9357:1990 Spraying equipment for crop protection Part 5: Specification for tank nominal volume and filling hole diameter UDC 631.348.45:621.642BS6356-5:1992 This British Standard, having been prepared under the directionof the Agricultural Machinery and Implement

2、s Standards Policy Committee, waspublished under the authorityof the Standards Boardand comes intoeffecton 15September 1992 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference AGE/15 Draft for comment 86/78180 DC ISBN 0 580 21152 5 Committees responsible

3、 for this British Standard The preparation of this British Standard was entrusted by the Agricultural Machinery and Implements Standards Policy Committee (AGE/-) to Technical Committee AGE/15, upon which the following bodies were represented: Agricultural Engineers Association British Agrochemicals

4、Association Ltd. British Crop Protection Council British Plastics Federation Health and Safety Executive Imperial College of Science and Technology Long Ashton Research Station Ministry of Agriculture, Fisheries and Food National Farmers Union Silsoe Research Institute Amendments issued since public

5、ation Amd. No. Date CommentsBS6356-5:1992 BSI 08-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope 1 2 Specifications 1 Table 1 Specifications for hand-held, mounted, trailed or self-propelledsprayers 1BS6356-5:1992 ii BSI 08-1999 National foreword This Part

6、 of BS 6356 has been prepared under the direction of the Agricultural Machinery and Implements Standards Policy Committee. It is identical with ISO9357:1990 Equipment for crop protection Agricultural sprayers Tank nominal volume and filling hole diameter. A British Standard does not purport to inclu

7、de all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages

8、i and ii, page1and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS6356-5:1992 BSI 08-1999 1 1 Scope This International Standard specifies values for the nominal volu

9、me of tanks and dimensions of the filling hole of agricultural sprayers. It applies to hand-held, mounted, trailed of self-propelled equipment with tanks without overpressure for crop protection. It also gives indications for scale between marks for the contents gauge. 2 Specifications The nominal v

10、olume of the tank, the diameter of the filling hole and the contents gauge scale between marks shall correspond to the values in Table 1 for hand-held, mounted, trailed or self-propelled sprayers. Table 1 Specifications for hand-held, mounted, trailed or self-propelled sprayers Nominal volume of tan

11、k a Diameter of filling hole min. Contents gauge scale between two marks b litres mm litres 1 2 3 4 5 c 1 5 and 1 000 300 100 a The difference between total and nominal volumes shall be5% min. b More detailed contents gauges are recommended. c No dimensions are fixed: manufacturers choice.BS6356-5:

12、1992 ISO 9357:1990 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions Br

13、itishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity wh

14、ile using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically

15、 receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implement

16、ation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic informa

17、tion services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For

18、 details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyr

19、ight, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the

20、standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.