BS 6318-1-1982 Bucket elevators Classification of bucket elevators《斗式升降机 第1部分 分类》.pdf

《BS 6318-1-1982 Bucket elevators Classification of bucket elevators《斗式升降机 第1部分 分类》.pdf》由会员分享，可在线阅读，更多相关《BS 6318-1-1982 Bucket elevators Classification of bucket elevators《斗式升降机 第1部分 分类》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 6318-1: 1982 ISO 7190:1981 Bucket elevators Part 1: Classification of bucket elevators ISO title: Continuous mechanical handling equipment Bucket elevators Classification UDC 621.867.3BS6318-1:1982 This British Standard, having been prepared under the directionof the Mechanical E

2、ngineering Standards Committee, was published underthe authority of the BoardofBSI and comes into effect on 29October1982 BSI 09-1999 The following BSI references relate to the work on this standard: Committee reference MEE/128 Draft for comment 80/76463 DC ISBN 0 580 13027 4 Cooperating organizatio

3、ns The Mechanical Engineering Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following: The organizations marked with an asterisk in the above list, together with the following, were directly represented on the Technical Committee

4、entrusted with the preparation of this British Standard: Associated Offices Technical Committee* Department of Trade (Marine Division) Association of Consulting Engineers* Department of Transport Association of Hydraulic Equipment Electricity Supply Industry in England and Manufacturers Wales Associ

5、ation of Mining Electrical and Energy Industries Council Mechanical Engineers Engineering Equipment Users Association* British Compressed Air Society Federation of Manufacturers of Construction British Constructional Steelwork Association Equipment and Cranes British Electrical and Allied Manufactur

6、ers Health and Safety Executive* Association (BEAMA) Institution of Gas Engineers British Gas Corporation Institution of Mechanical Engineers* British Gear Manufacturers Association Institution of Plant Engineers British Internal Combustion Engine Institution of Production Engineers* Manufacturers A

7、ssociation Lloyds Register of Shipping British Pump Manufacturers Association London Transport Executive British Steel Corporation Machine Tool Industry Research Association British Steel Industry Ministry of Defence British Valve Manufacturers Association Ltd National Coal Board* Chartered Institut

8、ion of Building Services Oil Companies Materials Association Crown Agents for Oversea Governments and Process Plant Association Administrations Society of Motor Manufacturers and Traders Department of Industry (Mechanical Limited Engineering) Telecommunication Engineering attention is drawn especial

9、ly to the following. The comma has been used throughout as a decimal marker. In British Standards it is current practice to use a full point on the baseline as the decimal marker. Wherever the words “International Standard” appear, referring to this standard, they should be read as “British Standard

10、“ A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International Standard

11、Corresponding British Standard ISO 2148:1974 BS 3810 Glossary of terms used in materials handling Part 2:1965 Terms used in connection with conveyors and elevators (excluding pneumatic) and hydraulic handling) (Technically equivalent) Summary of pages This document comprises a front cover, an inside

12、 front cover, pages i and ii, pages 1 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS6318-1:1982 BSI 09-1999 1 1 Scope and field of ap

13、plication This International Standard establishes the classification, according to their principal characteristics, of bucket elevators referenced in2.14.16 and 2.14.17 of ISO 2148. 2 Reference ISO 2148, Continuous mechanical handling equipment Nomenclature. 3 Classification 3.1 Classification accor

14、ding to the construction and to the path of the buckets 3.1.1 Vertical straight bucket elevators Elevators which carry the material along a vertical or inclined path, having an angle less than20 to the vertical axis. 3.1.2 Inclined straight bucket elevators Elevators which carry the material along a

15、 straight path, having an angle between55to 70 to the horizontal axis. 3.1.3 Gravity bucket conveyors in a vertical plane Elevators which carry the material between points located in the same vertical plane, at different levels. Figure 1 Figure 2 Figure 3 BS6318-1:1982 2 BSI 09-1999 3.2 Classificati

16、on according to the type of discharge 3.2.1 Centrifugal 3.2.2 Mixed (centrifugal and gravity) 3.2.3 Gravity, external 3.2.4 Gravity, internal 3.3 Classification according to the type of feeding 3.3.1 With direct external feed 3.3.2 With scraping external feed 3.3.3 With internal feed 3.4 Classificat

17、ion according to the driving medium system 3.4.1 Round links chain 3.4.2 Other types of chains 3.4.3 Belt 3.4.4 Wire ropes 4 Common types of bucket elevators 4.1 Vertical high speed (5 W 1 m/s) bucket elevator with centrifugal discharge and direct external feed, having chain or belt as driving mediu

18、m, with single or double casing. 4.2 Vertical slow speed (5 u 0,8 m/s) bucket elevator with internal gravity discharge and internal feed, having chain as driving medium with continuous buckets, single or double casing. 4.3 Vertical slow speed (5 u 0,8 m/s) bucket elevator with external gravity disch

19、arge and direct external feed, having chain as driving medium with continuous buckets, single or double casing. Figure 4 Figure 5 Figure 6 BS6318-1:1982 BSI 09-1999 3 4.4 Vertical slow speed (5 u 0,8 m/s) bucket elevator with internal gravity discharge and direct or scraping external feed, having ch

20、ain as driving medium, with single or double casing. 4.5 Vertical slow speed (5 u 0,8 m/s) bucket elevator, with external gravity discharge and direct or scraping external feed, having chain as driving medium and with single casing. Positive discharge is effected by means of deflecting sprockets. 4.

21、6 Inclined bucket elevator (5 u 1 m/s) with external gravity discharge and direct or scraping external feed, having chain or belt as driving medium, with or without casing. Figure 7 Figure 8 Figure 9 BS6318-1:1982 4 BSI 09-1999 4.7 Gravity bucket conveyor (5 about 0,5 m/s) with external or internal

22、gravity discharge by tipping the buckets and direct external or internal feed, having chain as driving medium, and with or without casing. Figure 10 BS6318-1:1982 BSI 09-1999 Publication referred to See national foreword.BS 6318-1: 1982 ISO 7190:1981 BSI 389 Chiswick High Road London W4 4AL BSIBriti

23、shStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of Britis

24、hStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the tec

25、hnical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders f

26、or all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless

27、otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its produ

28、cts and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administrati

29、on. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, sto

30、red in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or gr

31、ade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.