BS 4993-8-1980 Methods of test for aluminium fluoride for industrial use - Determination of sulphate content《工业用氟化铝试验方法 第8部分 硫酸盐含量测定》.pdf

《BS 4993-8-1980 Methods of test for aluminium fluoride for industrial use - Determination of sulphate content《工业用氟化铝试验方法 第8部分 硫酸盐含量测定》.pdf》由会员分享，可在线阅读，更多相关《BS 4993-8-1980 Methods of test for aluminium fluoride for industrial use - Determination of sulphate content《工业用氟化铝试验方法 第8部分 硫酸盐含量测定》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 4993-8: 1980 BS 5050-11: 1980 ISO 4280:1977 Methods of test for Aluminium fluoride for industrial use Part 8: Determination of sulphate content Methods of test for Cryolite Part 11: Determination of sulphate content ISO title: Cryolite, natural and artificial, and aluminium fluor

2、ide for industrial use Determination of sulphate content Barium sulphate gravimetric method UDC 661.8:555.634 + 661.862.362:546.226BS4993-8:1980 m 2 is the mass, in grams, of the barium sulphate found in the determination (7.2); 0,343 0is the factor for conversion of BaSO 4toSO 3 . 9 Test report The

3、 test report shall included the following particulars: a) the reference of the method used; b) the results and the method of expression used; c) any unusual features noted during the determination; d) any operation not included in this International Standard or in the InternationalStandards to which

4、 reference is made, regarded as optional.BS4993-8:1980 & BS5050-11:1980 BSI 11-1999 3 Annex ISO Publications relating to cyrolite, natural and artificial, and aluminium fluoride for industrial use CRYOLITE, NATURAL AND ARTIFICIAL ISO 1619, Preparation and storage of test samples. ISO 1620, Determina

5、tion of silica content Reduced molybdosilicate spectrophotometric method. ISO 1693, Determination of fluorine content Modified Willard-Winter method. ISO 1694, Determination of iron content 1,10-Phenanthroline photometric method. ISO 2366, Determination of sodium content Flame emission and atomic ab

6、sorption spectrophotometric methods. ISO 2367, Determination of aluminium content 8-Hydroxyquinoline gravimetric method. ISO 2830, Determination of aluminium content Atomic absorption method. ISO 3391, Determination of calcium content Flame atomic absorption method. ISO 3392, Determination of water

7、content Electrometric method. ISO 3393, Determination of moisture content Gravimetric method. ISO 4277, Conventional test for evaluation of free fluorides content. ISO 4280, Determination of sulphate content Barium sulphate gravimetric method. ISO 5930, Determination of phosphorus content Reduced mo

8、lybdophosphate spectrophotometric method. ISO 5938, Determination of sulphur content X-ray fluorescence method. ISO. . ., Sampling. ALUMINIUM FLUORIDE FOR INDUSTRIAL USE ISO 2362, Determination of fluorine content Modified Willard-Winter method. ISO 2368, Determination of iron content 1,10-Phenanthr

9、oline photometric method. ISO 2369, Determination of silica content Spectrophotometric method using the reducec silicomolybdic complex. ISO 2925, Preparation and storage of test samples. ISO 3392, Determination of water content Electrometric method. ISO 3393, Determination of moisture content Gravim

10、etric method. ISO 4279, Determination of sodium content Flame emission spectrophotometric method. ISO 4280, Determination of sulphate content Barium sulphate gravimetric method. ISO 5930, Determination of phosphorus content Reduced molybdophosphate spectrophotometric method. ISO 5938, Determination

11、of sulphur content X-ray fluorescence method. ISO . . ., Sampling.4 blankBS4993-8:1980 & BS5050-11:1980 BSI 11-1999 Publications referred to See national foreword.BS 4993-8: 1980 BS 5050-11: 1980 ISO 4280:1977 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the indepen

12、dent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they pos

13、sess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identit

14、y of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign sta

15、ndards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on stand

16、ards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information

17、 Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Cop

18、yright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted

19、 in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.