ATIS 0404130-0012-2013 Design Layout Report Guidelines For Access Service Industry Support Interface (DLR-ISI) (Version 12).pdf

《ATIS 0404130-0012-2013 Design Layout Report Guidelines For Access Service Industry Support Interface (DLR-ISI) (Version 12).pdf》由会员分享，可在线阅读，更多相关《ATIS 0404130-0012-2013 Design Layout Report Guidelines For Access Service Industry Support Interface (DLR-ISI) (Version 12).pdf（124页珍藏版）》请在麦多课文档分享上搜索。

1、 ATIS-0404130-0012 Design Layout Report Guidelines For Access Service Industry Support Interface (DLR-ISI) Version 12 ATIS-0404130-0012 Effective March 15, 2014 Issued September 20, 2013 Implemented March 15,2014 The Alliance for Telecommunication Industry Solutions (ATIS) is a technical planning an

2、d standards development organization that is committed to rapidly developing and promoting technical and operations standards for the communications and related information technologies industry worldwide using a pragmatic, flexible and open approach. Over 1,100 participants from more than 350 commu

3、nications companies are active in ATIS 23 industry committees, and ATIS Incubator Solutions Program. ATIS 0404130-0012 Design Layout Report Guidelines for Access Service Industry Support Interface (DLR-ISI). Is an ATIS standard developed by the Ordering Solutions Committee Access Service Ordering Su

4、bcommittee under the ATIS Ordering and Billing Forum (OBF) Published by Alliance for Telecommunications Industry Solutions 1200 G Street, NW, Suite 500 Washington, DC 20005 Copyright 2013 by Alliance for Telecommunications Industry Solutions All rights reserved. No part of this publication may be re

5、produced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. For information contact ATIS at 202.628.6380. ATIS is online at . Limited Exception for “Customized” Forms. In recognition of the business needs and processes implemented by c

6、ompanies throughout the industry, ATIS grants the following limited exception to the copyright policy. The forms contained within, once “Customized,” may be reproduced, distributed and used by an individual or company provided that the following is placed on all “Customized” forms: ATIS-0404130-0012

7、 Effective March 21, 2009 Issued September 26, 2008 Implemented March 21, 2009 “This form/screen is based upon the Ordering and Billing Forums (OBF) industry consensus approved guidelines, found in the Access Service Ordering Guidelines (ASOG) document. The ASOG may be obtained by contacting the All

8、iance for Telecommunications Industry Solutions (ATIS) at 1-800-387-2199 or: https:/www.atis.org/atis/docstore/index.asp.” For purposes of this limited exception, the term “Customized” means, the modification, by a company, of an ASOG form to be issued to a trading partner to make it company specifi

9、c by, for example, adding a company logo, graying-out optional fields not required by that specific issuing company, and converting into an electronic format/screen. This limited exception does not affect the ASOG document itself which remains copyrighted and may not be reproduced in whole or part.

10、Telcordia Technologies, Inc. was formerly known as Bell Communications Research, Inc. or Bellcore. Portions of this document, previously published by Bellcore, may still reflect the former name as it was embedded in the documentation under a prior license from the owners of the BELL trademark, which

11、 license has now expired. The use of this name does not suggest that Telcordia Technologies has licensed the names BELL, Bell Communications Research, or Bellcore for new uses or that the owners of the BELL trademark sponsor, endorse or are affiliated with Telcordia Technologies or its products. Pri

12、nted in the United States of America. Notice of Disclaimer and Limitation of Liability The information provided in this document is directed solely to professionals who have the appropriate degree of experience to understand and interpret its contents in accordance with generally accepted engineerin

13、g or other professional standards and applicable regulations. No recommendation as to products or vendors is made or should be implied. ATIS-0404130-0012 Effective March 15, 2014 Issued September 20, 2013 Implemented March 15,2014 NO REPRESENTATION OR WARRANTY IS MADE THAT THE INFORMATION IS TECHNIC

14、ALLY ACCURATE OR SUFFICIENT OR CONFORMS TO ANY STATUTE, GOVERNMENTAL RULE OR REGULATION, AND FURTHER, NO REPRESENTATION OR WARRANTY IS MADE OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. ATIS SHALL NOT BE LIABLE, BEYOND THE AMOUNT OF

15、 ANY SUM RECEIVED IN PAYMENT BY ATIS FOR THIS DOCUMENT, WITH RESPECT TO ANY CLAIM, AND IN NO EVENT SHALL ATIS BE LIABLE FOR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. ATIS EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PROVIDED IN THIS DOCUMENT IS AT THE RISK

16、OF THE USER. DLR-ISI 12 SYNOPSIS OF CHANGES Page 1 of 3 DLR-ISI 12 CHANGES - ISSUES INCLUDED IN THIS SYNOPSIS ISSUE NUMBER DESCRIPTION 3484 DLR: Allow 7-digit extension on TEL (DSGCON) DLR-ISI 12 SYNOPSIS OF CHANGES Page 2 of 3 The following table depicts the type of change category definitions: TYP

17、E OF CHANGE = CATEGORY DEFINITIONS NEW = Adding a new field REM = Removing an existing field FN = Field/Tag name change (e.g., EXEMPT REASON changed to ER) FORMAT = Field format change (e.g., moved to another section of the form, etc.) DEF = Definition change DEFN = Definition notes addition, change

18、, deletion VE = Valid entries addition, change, deletion VEN = Valid entry notes addition, change, deletion USE = Usage statement change USES = Usage strip change USEN = Usage notes addition, change, deletion DC = Data characteristics change (e.g., change from numeric to alpha/numeric) DCL = Data ch

19、aracteristics length change DCN = Data characteristics note addition, change, deletion EX = Example addition, change, deletion EXN = Example notes addition, change, deletion FORM = Changes made to the ASR forms (i.e., additions, rearrangements, field length changes or deletions of fields) GLOSSARY =

20、 Identifies changes within the glossary sections (i.e., additions or deletions of fields) TEXT = Identifies changes within the text of a section (i.e., additions or deletions of fields) DLR-ISI 12 SYNOPSIS OF CHANGES Page 3 of 3 SYNOPSIS OF CHANGES SEPTEMBER 20, 2013 PRAC # ISSUE # Field/ Section Ty

21、pe Of Change Description of Change Field Length DLR 3484 TEL (DSGCON) DCL Increased field length. 20 DLR 3484 TEL (DSGCON) EX Increased length of provided Example. 20 DLR 3484 TEL (DSGCON) FORM Increased field length on Camera Ready Form. 20 DLR 3484 TEL (DSGCON) FORM Increased field length on Enume

22、rated Form. 20 ATIS-0404130-0012 Effective March 21, 2009 Issued September 26, 2008 Implemented March 21, 2009 THIS PAGE INTENTIONALLY LEFT BLANK. ATIS-0404130-0012 Effective March 21, 2009 Issued September 26, 2008 Implemented March 21, 2009 DESIGN LAYOUT REPORT GUIDELINE FOR ACCESS SERVICES TABLE

23、OF CONTENTS Section Page 1. INTRODUCTION _ 1-1 2. GENERAL _ 2-1 3. DLR CONTENT AND FORMAT _ 3-1 4. DESCRIPTIONS OF VALID FORM ENTRIES _ 4-1 4.1 ADMINISTRATIVE AND ADDITIONAL DETAIL FORMS ENTRIES _ 4-2 4.1.1 ADMINISTRATIVE SECTION _ 4-2 4.1.2 DESIGN SECTION _ 4-30 4.2 END USER FORM ENTRIES _ 4-61 4.2

24、.1 PRIMARY LOCATION SECTION _ 4-61 4.2.2 SECONDARY LOCATION SECTION _ 4-72 4.3 ADDITIONAL NOTES FORM ENTRIES_ 4-83 4.3.1 NOTE SECTION _ 4-83 5. ALPHABETIC/NUMERIC CROSS REFERENCE GLOSSARY _ 5-1 6. DESIGN LAYOUT REPORT (DLR) FORM NUMBERED _ 6-1 7. DESIGN LAYOUT REPORT (DLR) FORM CAMERA READY _ 7-1 AT

25、IS-0404130-0012 Effective March 21, 2009 Issued September 26, 2008 Implemented March 21, 2009 THIS PAGE INTENTIONALLY LEFT BLANK. ATIS-0404130-0012 Effective March 21, 2009 Issued September 26, 2008 Implemented March 21, 2009 1-1 1. INTRODUCTION 1.1 In order for a Provider to provision lines, trunki

26、ng and transport services, it is necessary that the Provider and the Customer communicate. One document which provides part of this communication is the Design Layout Report (DLR). 1.2 The DLR is initiated by the Provider. It includes pertinent information that will permit the Customer to review the

27、 design and ensure the Providers ability to provide the service being ordered. 1.3 The DLR is divided into four forms: the DLR Administrative Form, the DLR Additional Detail Form, the DLR End User Information Form and the DLR Additional Notes Form. Further description of the information contained on

28、 these forms and their uses in the design of various types of services follow in section 3 of this document. 1.4 All references in this document regarding Feature Group A (FGA) and/or Feature Groups B, C and D (FGB, FGC, FGD) include the equivalent line-side Basic Serving Arrangement (BSA) and equiv

29、alent trunk-side BSA respectively. 1.5 In an effort to ensure that all possible providers, users and customers of services are addressed in all issues and documentation, the terms Provider and Customer will be used, representing the two roles involved with each transaction. Throughout this document,

30、 the terms IC (Interexchange Carrier) and EC (Exchange Carrier) may be used to describe the categories Customer and Provider. This is to maintain consistency with prior uses of this practice, though their use does not imply exclusivity within the Customer and Provider categories. ATIS-0404130-0012 E

31、ffective March 21, 2009 Issued September 26, 2008 Implemented March 21, 2009 THIS PAGE INTENTIONALLY LEFT BLANK. ATIS-0404130-0012 Effective March 21, 2009 Issued September 26, 2008 Implemented March 21, 2009 2-1 2. GENERAL 2.1 Where the tariff/contract/negotiation requires, a DLR should be issued b

32、y the Provider whenever a Customer requests one via the ASR. Administrative changes to the service are excluded. A DLR may be issued for the discontinuance of a switched access digital interface. 2.2 If the service cannot be provided as ordered the Provider will notify the Customer and the provision

33、ing process will stop until: A. The service ordered can be provided by the Provider, or B. The service ordered is changed by the Customer or C. The service ordered is canceled by the Customer 2.3 DLR confirmation is the option of the Customer. If the Customer chooses to confirm the DLR, the Customer

34、 will determine the amount of time required between the Design Layout Report Date (DLRD) and the Confirming Design Layout Report Date (CDLRD). The DLRD and CDLRD are communicated via the Confirmation Notice, ATIS-0404011. This additional time is added to the overall interval and should include: A. T

35、he time for the DLR to be received by the Customer from the Provider B. The time required to review the DLR by the Customer and C. The time required to return the confirming DLR to the Provider. The maximum allowable interval is 10 days 2.4 Verbal confirmation may be accepted by the Provider based u

36、pon local agreements. Confirming DLR changes to the DLR may require supplements to the service ordered. 2.5 Reasonable requests for resends and reissues are a normal part of the business and may be supplied when requested by the Customer. The Provider will identify a DLR point of contact to which re

37、quests may be forwarded. ATIS-0404130-0012 Effective March 21, 2009 Issued September 26, 2008 Implemented March 21, 2009 2-2 2.6 If a DLR is requested after the service is in effect, it can be provided; however, the Customer may incur additional charges from the Provider for assembling the DLR(s). T

38、he Customer should forward their requests to the Providers DLR point of contact and each request will be handled on an Individual Case Basis (ICB) for charges and response time. 2.7 Requests to issue duplicate DLRs to the same location or to multiple locations should be negotiated between the Custom

39、er and appropriate Provider. 2.8 This practice is reissued to clarify current definitions as recommended by users of this practice. Additions, deletions and significant changes are summarized in the synopsis of changes. 2.9 The Design Layout Report Guideline does not convey licensing rights to non-C

40、OMMON LANGUAGE licensees to use the COMMON LANGUAGE code sets identified throughout the Design Layout Report Forms in their internal operations. Where COMMON LANGUAGE is provided, its intended use by non-COMMON LANGUAGE licensees is limited. Allowable uses will be specified by the COMMON LANGUAGE li

41、censee per their COMMON LANGUAGE contract. 2.10 Options described in this practice may not be applicable to individual provider tariffs; therefore, use of either the field or valid entries within the field is based on provider tariffs/contracts/negotiations. _ COMMON LANGUAGE is a registered tradema

42、rk and CLLI is a trademark of Telcordia Technologies, Inc. ATIS-0404130-0012 Effective March 21, 2009 Issued September 26, 2008 Implemented March 21, 2009 3-1 3. DLR CONTENT AND FORMAT 3.1 The DLR document represents the information needed on the DLR and the actual field name, usage and data charact

43、eristics. 3.2 The DLR is divided into four forms with nine subdivided sections. 3.3 The DLR Administrative Form of the DLR is sent with each DLR and contains two sections: The Administrative section which includes: A. Customer and Provider identification and contact B. Critical date information C. I

44、ssue date, issue number, page number and page range D. Remarks The Design section which includes: A. The service technical requirements B. Sequential listing The DLR sequential listing should contain the ID of the last assigned equipment or facility at the interface excluding any locally assigned ti

45、e pairs, e.g., HICAP CFA, Bay, Panel, Jack and Pin. 3.4 The DLR Additional Detail Form section of the DLR is an optional form based upon additional sequential listings being required to provide a complete document. This form is separated into two sections: The Administrative section provides a subse

46、t of the previous Administrative section, relating additional forms with the DLR Administrative Form as part of a complete DLR document. The Design section is a continuation of a sequential listing information presented on the DLR Administrative Form. ATIS-0404130-0012 Effective March 15, 2014 Issue

47、d September 20, 2013 Implemented March 15, 2014 3-2 3.5 The DLR Additional Notes Form section of the DLR is optional, it is provided when the Note Indicator (N) field in the Design section has an entry(s). This page is separated into two sections: The Administrative section provides a subset of the

48、previous Administrative section, relating additional forms with the DLR Administrative Form as part of a complete DLR document. The Notes section provides details relative to an entry(s) in the Note Indicator field in the Circuit Design section of the DLR. 3.6 These three forms (Administrative, Additional Detail, and Additional Notes) are the forms that could be utilized to provide a DLR for all s