ASD-STAN TR 7000-2-2002 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 2 Rubbers《航空航天系列 非金属材料 材料标准起草和提出规则 第2部分 橡胶 第1版》.pdf
《ASD-STAN TR 7000-2-2002 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 2 Rubbers《航空航天系列 非金属材料 材料标准起草和提出规则 第2部分 橡胶 第1版》.pdf》由会员分享,可在线阅读,更多相关《ASD-STAN TR 7000-2-2002 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 2 Rubbers《航空航天系列 非金属材料 材料标准起草和提出规则 第2部分 橡胶 第1版》.pdf(14页珍藏版)》请在麦多课文档分享上搜索。
1、 AECMA Technical Report TR 7000-2 Rapport Technique AECMA Edition 1 AECMA Fachbericht June 2002 PUBLISHED BY THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES - STANDARDIZATION kl(%k Gulledelle 94 - 8-1200 Brussels -Tel. + 32 2 775 81 10 - Fax. + 32 2 775 81 11 - www.aecrna-stan.org ICs: Edition appr
2、oved for publication Extra copies can be supplied by B.N.A.E. Technopolis 54 - 199, rue Jean-Jacques Rousseau 28 June 2002 92138 ISSY - LES - MOULINEAUX CEDEX - FRANCE ENGLISH VERSION Non-metallic Material Domain Aerospace series Non-metallic materials Rules for the drafting and presentation of mate
3、rial standards Part 2: Rubbers Srie arospatiale Luft- und Raumfahrt Matriaux non-mtalliques Nichtmetallische Werkstoffe Rgles pour la prparation et la presentation Regeln fr die Erstellung und die Gestaltung des normes de matriaux von Werkstoffnormen Partie 2 : lastomres Teil 2: Kautschukmischungen
4、This Technical Report was drawn up by the Non-metallic Material Domain of AECMA-STAN. The reason which led to the publication of the document as a Technical Report is explained in the foreword. Page 2 TR 7000-2: 06-02 Foreword The main task of AECMA-STAN is to prepare EN standards. In exceptional ci
5、rcumstances, however, the publication of a Technical Report of one of the following types may be proposed : - type 1, the subject is still under technical development requiring wider exposure ; - type 2, a Technical Committee has collected data of a different kind from that which is normally publish
6、ed as a European Standard. The Non-metallic Material Domain decided to publish this document in the form of a Technical Report of type 2 in order to facilitate the updating of this document. Contents Page O Introduction . . 3 1 2 Normative references 3 Definitions, symbols and abbreviations 3 4 Rule
7、s for drafting and presentation of material standards . 3 Table AI - Characteristic numbers applicable to Table 1: General requirements 5 Table BI - Characteristic numbers applicable to Tables 2 to 4: Other requirements . . 6 Annex A (normative) Annex B (normative) Annex C (informative) Example . 7
8、Page 3 TR 7000-2: 06-02 O Introduction This standard is part of the series of TR non-metallic materials standards for aerospace applications. The general organisation of this series is described in EN 4385. This document is a level 2 document as defined in EN 4385. It shall be used in conjunction wi
9、th TR 7000-1. 1 Scope This standard specifies the rules for the drafting and presentation of EN aerospace series non-metallic material standards for rubbers for aerospace applications. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other pub
10、lications. These normative references are cited at the appropriate places in the next and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revis
11、ion. For undated references the latest edition of the publication referred to applies. IS0 1629 EN 4385 TR 7000-1 Rubber and latices - Nomenclature Aerospace series - Non-metallic materials - General organisation of standardisation - Links between types of standards 1) Aerospace series - Non-metalli
12、c materials - Rules for the drafting and presentation of material standards - Part 1 : General rules 2) 3 Def i ni tio n s, symbols and ab brevia tio ns See TR 7000-1. 4 Rules for drafting and presentation of material standards NOTE standardised EN products. Examples given below are only intended to
13、 illustrate the rules and may not correspond to real 4.1 Title See TR 7000-1 and annex C of this standard. The following are examples of descriptions which shall be used; these examples may be supplemented by other descriptions as require by the relevant Project Team. 1) Published as AECMA Prestanda
14、rd at the date of publication of this standard 2) Published as AECMA Technical Report at the date of publication of this standard Page 4 TR 7000-2: 06-02 1 Type of rubber - Butadiene (BR) - Silicone (MVQ) - Chloroprene (CR) For rubber nomenclature, see IS0 1629. 2 Hardness 3 Additional information -
15、 Lw compression set - Hight tear strength - Fire resistance 4.2 Contents See TR 7000-1 and annex C of this standard. 4.3 Clause O: Onwards See TR 7000-1 and annex C of this standard. 4.4 General requirements See TR 7000-1 and annex C of this standard. All individual lines shall be sequentially numbe
16、red, starting with number 1 for the material description. 4.4.1 Table 1: General requirements The characteristic numbers applicable to table 1 are given in annex A of this standard. All of the characteristics given in table 1 are mandatory and shall be completed in accordance with TR 7000-1 and anne
17、x C of this standard. 4.4.2 Tables 2 to 4 See TR 7000-1 and annex C of this standard. The characteristic numbers applicable to tables 2 to 4 are given in annex B of this standard. Page 5 TR 7000-2: 06-02 characteristic number 1 .o01 Annex A (normative) Characteristics Material description Table AI -
18、 Characteristic numbers applicable to Table I : General requirements 1 .o02 1 .O03 Formulation Form and method of production 1 .O04 1 .O05 Technical specification Grade I 1 .O06 I Service temperature - 1.010 Storage 1.011 Shelf life 1.013 1 .O93 1 .O94 Processing condition Quality assurance - Certif
19、icate Designation - 1 .O98 1.999 Notes Health, safety and environment Page 6 TR 7000-2: 06-02 Annex B (normative) Table BI - Characteristic numbers applicable to Tables 2 to 4: Other requirements used in table(s) Normal 2 Characteristic number 105 30 I 110 302 305 31 9 501 502 503 51 O 51 2 999 Char
20、acteristic 3 4 Glass transition temperature (DSC, DMA) - TRIO - crystallisation X Density (linear, volume, masshit area) - density X Dimensional - change of mass - change of volume X X Hardness - IRHD Hardness X Tensile intrinsic properties (resistance, modulus, Poissons ratio) - tensile strength -
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASDSTANTR700022002AEROSPACESERIESNONMETALLICMATERIALSRULESFORTHEDRAFTINGANDPRESENTATIONOFMATERIALSTANDARDSPART2RUBBERS

链接地址:http://www.mydoc123.com/p-453857.html