ARMY MIL-P-13533-1954 PACKAGING OF MODIFICATION KIT MX-898( ) GR《MX-898() GR型成套改装用零件的包装》.pdf

《ARMY MIL-P-13533-1954 PACKAGING OF MODIFICATION KIT MX-898( ) GR《MX-898() GR型成套改装用零件的包装》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-P-13533-1954 PACKAGING OF MODIFICATION KIT MX-898( ) GR《MX-898() GR型成套改装用零件的包装》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、MILITARY SPECIFICATION MIL -P -1 3 533( SigC) 6 July 1954 PACKAGING OF MODIFICATION KIT MX-898( )/GR 1. SCOPE z 1.1 This specification covers preservation, packaging, packing and marking of Modification Kit MX-898( )/GR for domestic and overseas shipment or extended storage. 2. APPLICABLE DOCUMENTS

2、2.1 I. The following specifications and standards, of the issue in effect on date of invitations for bids, form a part of this specification. SPECIFICATIONS FEDERAL T-T-901 NN-B-621 NN-B-631 UU-T-111 LLL-B-631 LLL-B-636 LLL-F-291 PPP-B-601 Twine, Hemp Boxes, Wood, Nailed and Lock Corner Boxes, Wood,

3、 Wirebound (For Domestic Shipment) Tape, Paper Gummed, (Sealing and Securing) Boxes, Fiber, Corrugated (For Domestic Shipment) Boxes, Fiber, Solid (For Domestic Shipment) Fiberboard, Corrugated, Single-Faced (Flexible) Boxes, Wood Cleated Plywood MILITARY JAN-P-106 Packaging and Packing fox Overseas

4、 Shipment - Boxes, Wood Nailed, (For Boxes Where Weight of Contents Not In excess of 1,000 Pounds) MIL-B-107 JAN-P-108 Boxes, Wood, Wirebound (Overseas Type) Packaging and Packing for Overseas Shipment - Boxes, Fiberboard (V-Board and W-Board), Exterior and Interior MIL-P-116 Preservation, Methods o

5、f JAN-P-117 JAN-P-127 MIL-B-131 Barrier Material, Water-Vapor-Proof, Flexible MIL-M-12320 Masts, Sections, and Adapter Kit Packaging and Packing for Overseas Shipment - Bags, Packaging and Packing for Overseas Shipment - Tape, Interior Packaging Adhesive, Pressure-Sensitive, Water-Resistant Copyrigh

6、t Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Spec No. MIL-P-13533( SigC) Packaging of Modification Kit MX-898( )/GR U.S. ARMY 19-10 Filler , Interior Packing, Fiberboard, Corrugated, S

7、ingle and Double-Faced, for General Packing Purposes STANDARDS MILITARY MIL-STD-129 Marking of Shipments (Copies of specifications, standards and publications required by contractors in connec- tion with specific procurement functions should be obtained from, or as directed by, the contracting offic

8、er, Both the title and the identifying number or symbol should be stipulated when requesting copies). OTHER PUBLICATIONS Consolidated Freight Classification Ratings , Rules and Regulations (Application for copies should be addressed to the Association of American Railroads, Chicago, Illinois). 1 3.

9、REQUIREMENTS 3.1 Material. - Material shall be as specified herein, Material not definitely specified shall be of good commercial quality entirely suitable for the purpose. Material shall be free from all defects and imperfections that might affect the serviceability of the preservation, packing and

10、 packaging. 3.2 Genelal requirements. - The components of Modification Kit MX-898( )/GR shall be packaged in accordance with procedures specified for the desigpated methods as prescribed in Specification MIL-P-116 and further described in the following paragraphs. 3.3 Preservation and packaging. - 3

11、.3.1 Domestic immediate use, - Modification Kit MX-898( )/GR shall be packaged to afford protection against deterioration and damage during shipment. 3.3.2 Domestic limited storage. - Modification Kit MX-898( )/GR shall be packaged in accordance with Specification MIL-P-116 as follows. Copyright Com

12、munications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Spec No. MIL-P-13533( SigC) Packaging ofModification Kit MX-898( )/GR 3.3.2.1 Technical literature. - Package each technical literature Method I

13、C-3 as follows. Inclose each technical literature within a close-fitting, Type II, Class b bag conforming to Specification JAN-P-117. Properly seal closure. 3.3.2.2 Roll CW-l87/GR, Bag CW-l88/GR. - Package each roll and each bag Method III as follows. Fold each item neatly into a bundle of proportio

14、nate dimensions and suitably tie with cotton tape. Cushion each bag by wrapping in flexible corrugated paper conforming to Specification LLL-F-291, securing the cushioning with gummed paper tape conforming to Specification UU-T-111. 3.3.2.3 Handset H-33( )/PT. - Package each handset Method III as fo

15、llows. Wind the cord evenly arourrd.the handset and secure by-tying or by-means of suitable tape. Cushion each handset as specified in 3.3.2.2. 3.3.2.4 Mast Sections AB-22/GR, AB-23/GRY AB-24/GR, - Package mast sections, including spares in accordance with Specification MIL-M-12320. 3.3.2.5 Power Ca

16、ble Assembly CX-l209/U and CX-l2lO/U. - Package each cable assembly individually Method III as follows. Wind each cable assembly into a coil of proportionate dimensions and tie at 3 places with cotton tape, securing the cable termi- nals to the coil with the ties, Cushion each cable assembly individ

17、ually by wrapping within flexible corrugated paper, securing the cushioning with gummed paper tape. 3.3.2.6 Battery Box ICase CY-590/GRC). - Package each battery box Method III as follows, Inclose each battery box within a snug conforming wrap of flexible corru- gated paper. Secure all folds and sea

18、ms with gummed paper tape. 3.3.2.7 Antenna Connector MT-652. - Package each antenna connector Method III following procedures specified in 3.3.2.6. 3.3.2.8 Consolidated package, - Consolidate the items packaged as specified in 3.3.2.1 through 3.3.2.7, together within a corrugated fiberboard box, Con

19、forming to Specification LLL-B-631. Fill all voids with flexible corrugated paper to prevent movement, Seal box closures, corners and joints with gummed paper tape. 3.3.2.9 Generator .G-8/GRC. - 3.3.2.9.1 Disassembly. - Disassemble the 2 cranks and the 3 legs from the gen- erator. All hardware remov

20、ed in the disassembly operation shall be inclosed within a cloth draw string bag and suitably secured to the component from which removed. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from

21、IHS-,-,-Spec No. MIL -P -1 3 5 33( Sig C) Packaging of Modification Kit MX-898( )/GR 3.3.2.9.2 Technical manual. - Package each technical manual Method IC-3, following procedures specified in 3.3.2.1. 3.3.2.9.3 Cranks, legs, - Package each crank and each leg Method III as follows. As required, cushi

22、on each element by wrapping within flexible corrugated paper, making a snug conforming wrap, Secure cushioning with gummed paper tape, Nest cranks and legs together and secure by tying with twine conforming to Specification T-T-901. 3.3.2.9.4 Generator G-8/GRC. - Package each generator Method III as

23、 follows. Place the spare fuses within the bag provided within the generator. Continue packaging following applicable procedures specified in 3.3.2.9.3. 3.3.2.9.5 Consolidated package. - Consolidate the items packaged as specified in 3.3.2.9.2 through 3.3.2.9.4 following procedures specified in 3.3.

24、2.8. 3.3.3 Military overseas. - Preserve and package components of Modification Kit MX-898( )/GR in accordance with procedures specified for the designated methods as prescribed in Specification MIL-P-116 and further described in the following paragraphs. 3.3.3.1 Technical literature. - Package each

25、 technical literature Method IC-3 following procedures specified in 3.3.2.1. 3.3.3.2 Roll CW-l87/GR, Bag CW-l88/GR. - Package each item determined in quantity and number from the bid request or contract Method III following procedures specified in 3.3.2.2. 3.3.3.3 Handset H-33( )/PT. - Package each

26、handset Method III following procedures specified in 3.3.2.3. 3.3.3.4 Mast Sections AB-22/GR, AB-23/GR, AB-24/GR. - Package mast sections as specified in Specification MIL-M-12320. 3.3.3.5 Cable Assembly CX-l209/U, CX-l2lO/U. - Package each cable assembly Method IA-8 as follows. Wind each cable asse

27、mbly into a coil of proportionate dimensions and tie at 3 places with cotton tape, securing the cable terminals to the coil with the ties. Cushion each coiled cable assembly by wrapping in flexible corru- gated paper, securing the cushioning with gummed paper tape. Inclose each cushioned cable assem

28、bly within an individual close-fitting bag, fabricated of water-vapor-proof barrier material, qualified for Class 2 application conforming to Specification MIL-B-131. Properly seal closure. /- _- 4 K ! ! Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for Re

29、saleNo reproduction or networking permitted without license from IHS-,-,-Spec No. MIL -P -1 3 5 33 (Sig C) Packaging of Modification Kit MX-898( )/GR 3.3.3.6 Battery Box (Case CY-590( )/GRC). - Package each battery box Method III following procedures specified in 3.3.2.6 applied along the carton fla

30、ps where they meet in the center. Close battery box and secure all fastenings. Cushion each battery box on all surfaces with cells or pads or both fabricated of corrugated fiberboard, designed to take up the shock of impact normally encountered in handling and transit and conforming to Specification

31、 19-10 (A or C flutes acceptable). Place each cushioned battery box within a close-fitting suitable style and grade corrugated fiberboard box conforming to Specification LLL-B-631. Seal all box closures, corners and joints with gummed paper tape. 3.3.3.7 Antenna Connector MT-652. - Package each ante

32、nna connector Method IA-8 following applicable procedures specified in 3.3.3.5. 3.3.3.8 Consolidated package. - Consolidate the items packaged as specified in 3.3.3.1 through 3.3.3.7 following procedures specified in 3.3.2.8, except the carton used shall conform to Specification JAN-P-108 and the se

33、aling tape used shall be water-resistant, pressure-sensitive tape conforming to Specification JAN-P-127. 3.3.3.9 Generator G-8/GRC. - 3.3.3.9.1 Disassembly. - Disassembly shall be as specified in 3.3.2.9.1. .3.3.3.9.2 Technical manuals. - Package each technical manual Method IC-3 following procedure

34、s specified in 3.3.2.1. 3.3.3.9.3 Cranks, legs. - Package cranks and legs Method III following procedures specified in 3.3.2.9.3. 3.3.3.9.4 Generator G-8/GRC. - Package each generator Method IIb as follows. Place spare fuses within the bag within the generator. Cushion each generator on all surfaces

35、 with cells or pads or both fabricated of corrugated fiberboard, conforming to Specification 19-10, and designed to absorb the shock of impact normally encountered in handling and transit. Place each cushioned generator, together with the required amount of desiccant as prescribed in Specification M

36、IL-P-116 within a close-fitting, suitable style and grade corrugated fiberboard box. Seal entire closure with gummed paper tape conforming to Specification UU-T-111. Blunt all corners of the box. Place the boxed generator within a water-vapor-proof barrier, qualified for Class 1 application in accor

37、dance with the requirements of Specification MIL-B-131. Heat seal closure. Place the water-vapor-proofed generator within a close-fitting, suitable style and grade fiberboard box conforming to Specification LLL-B-631. Seal entire box closures, corners and joints with gummed paper tape. 3.3.3.9.5 Con

38、solidated package, - Consolidate the items packaged as specified in 3.3.3.9.1 through 3.3.3.9.4 together following procedures specified in 3.3.3.8. ?- - 5 Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted witho

39、ut license from IHS-,-,-Spec No. MIL-P-13533 (SigC) Packaging of Modification Kit MX-898( )/GR 3.4 Packing.- 3.4.1 Domestic immediate use. - The Modification Kit MX-898( )/GR shall be so packed as to insure arrival at destination in satisfactory condition and in containers complying with Consolidate

40、d Freight Classification Rules at lowest rates. 3.4.2 Domestic limited storage. - The Modification Kit MX-898( )/GR shall be packed in wood cleated plywood, nailed wood or wirebound boxes conforming to Speci- fication NN-B-621, NN-B-631 or PPP-B-601. The gross weight shall not exceed 65 pounds for f

41、iberboard boxes and 200 pounds for plywood or wood boxes. Closure shall be made in accordance with the applicable box specification. 3.4,3 Military overseas. - Place one each consolidated package specified in 3.3.3.8 and one each consolidated package specified in 3.3.3.9 together within a wood cleat

42、ed plywood, nailed wood or wirebound box conforming to the requirements of Specification PPP-B-601, JAN-P-106 or MIL-B-107 respectively. Fabricate the box to fit the contents snugly. As required, suitably block and brace the contents to prevent movement. Close each shipping container as specified in

43、 the appendix of the applicable box specification. 3.4.4 skipping containers shall be strapped in conformance with the requirements Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-7 Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-