ARMY MIL-DTL-3943 169 B-2010 DECORATION DIRECTOR扴 AWARD OFFICE OF PROTECTION SERVICES SMITHSONIAN INSTITUTE《奖章 史密森学会文化财产保护办公室主任奖》.pdf

《ARMY MIL-DTL-3943 169 B-2010 DECORATION DIRECTOR扴 AWARD OFFICE OF PROTECTION SERVICES SMITHSONIAN INSTITUTE《奖章 史密森学会文化财产保护办公室主任奖》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-3943 169 B-2010 DECORATION DIRECTOR扴 AWARD OFFICE OF PROTECTION SERVICES SMITHSONIAN INSTITUTE《奖章 史密森学会文化财产保护办公室主任奖》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET DECORATION, DIRECTORS AWARD, OFFICE OF PROTECTION SERVICES, SMITHSONIAN INSTITUTE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein

2、shall consist of this specification sheet and the latest issue of MIL-DTL-3943. MATERIAL: Red Brass FINISH: 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. DIMENSIONS: DIAMETER: 1-3/8 inches (REF) THICKNESS (at edge): 0.

3、125 inch + 0.005 inchINCH-POUND MIL-DTL-3943/169B 19 March 2010 SUPERSEDING MIL-DTL-3943/169A 1 May 1997 OBVERSE REVERSE #11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/169B Page 2 of 2 SUSPENSION BAR: HEIGHT: 9/32 inch + 1/64 inch W

4、IDTH: 1-15/32 inches + 1/64 inch THICKNESS (at edge): 0.100 inch + 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The suspension ring shall have an outside diameter of 3/8 inch + 1/64 inch and finished to match the pendant and suspen

5、sion bar. 3. Enameled areas shall be Green as indicated. The color shall conform to the TIOH Enamel Color Chip Number 11. 4. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the manufacturer. 5. Lettering shall be incised on the reverse. 6. Decoration set shall consist

6、 of a regular size medal and a lapel button all packaged in a presentation case conforming to MIL-C-14633, Type XV, Style 6 with a Class 1 or 1A pad. 7. The ribbon for the pendant drape and service ribbon shall conform to MIL-DTL-11589/387. 8. The lapel button shall conform to MIL-DTL-11484/229. 9.

7、This item is not authorized for commercial sale, and may be produced only under Government contract. A copy of the original purchase order from the Government Agency concerned must accompany all written requests prior to the loan of a Government hub or die. CHANGES FROM PREVIOUS ISSUE: The margins o

8、f this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requi

9、rements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - IH Army - IH Review activities: (Project No. 8455-2010-093) DLA - CT NOTE: The activities listed above were interested in th

10、is document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-