ANSI ISO IEC 11160-1-1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 1 Class 1 and Class 2 printers (A.pdf

《ANSI ISO IEC 11160-1-1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 1 Class 1 and Class 2 printers (A.pdf》由会员分享，可在线阅读，更多相关《ANSI ISO IEC 11160-1-1996 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 1 Class 1 and Class 2 printers (A.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL STANDARD ISOJIEC 11160-1 First edition 1996-08-01 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 1: Class 1 and Class 2 printers Technologies de /information - cquipements de bureau - Information minima/e devant

2、figurer dans /es notices techniques - lmprimantes - Partie 7: lmprimantes classe 1 et classe 2 Reference number ISO/IEC 11160-1 :I 996(E) Adopted by INCITS (InterNational Committee for Information Technology Standards) as an American National Standard.Date of ANSI Approval: 1/11/99Published by Ameri

3、can National Standards Institute,25 West 43rd Street, New York, New York 10036Copyright 2002 by Information Technology Industry Council (ITI).All rights reserved.These materials are subject to copyright claims of International Standardization Organization (ISO), InternationalElectrotechnical Commiss

4、ion (IEC), American National Standards Institute (ANSI), and Information Technology Industry Council(ITI). Not for resale. No part of this publication may be reproduced in any form, including an electronic retrieval system, withoutthe prior written permission of ITI. All requests pertaining to this

5、standard should be submitted to ITI, 1250 Eye Street NW,Washington, DC 20005.Printed in the United States of AmericaISOAEC 11160-l :1996 (E) Contents 1 Scope 2 Normative references 3 Conformance 4 Test and measurement conditions 5 Information to be included in the specification sheets Annex A - Clas

6、sification of printers - Class 1 and Class 2 Annex B - Classification of printers - Class 3 and Class 4 Annex C - Bibliography Q ISOllEC 1996 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanic

7、al, including photocopying and microfilm, without permission in writing from the publisher. ISO/IEC Copyright Office * Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland 1 2 11 13 15 ii ISO/IEC ISO/lEC 11160-1:1996(E) Foreword IS0 (the International Organization for Standardiza

8、tion) and IEC (the International Electrical Commission) form the specialised system for worldwide standardisation. National Bodies that are members of IS0 or IEC participate in the development of International Standards through technical committees established by the respective organisation to deal

9、with particular fields of mutual interest. Other international organisations, governmental and non-governmental, in liaison with IS0 and IEC, also take part to the work. In the field of information technology, IS0 and IEC have established a joint technical committee ISO/IEC JTCl. Draft International

10、 Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75% of the national bodies casting a vote. International Standard ISO/IEC 11160-1, was prepared by Joint Technical Committee ISO/IE

11、C JTCl, information technology, Subcommittee SC28, Office equipment. ISO/IEC 1160 consists of the following parts, under the general title Information technology - Office equipment - Minimum information to be included in specification sheets - Printers: - Part 1: C/ass 1 and Class 2 printers - Part

12、2: C/ass 3 and Class 4 printers Annex A forms an integral part of this part of ISO/IEC 11160. Annexes B and C are for information only. * III ISO/lEC 11169-1:1996(E) 0 ISO/IEC Introduction Printers of many different types and capacities are now available and their specifications vary so widely that

13、it is difficult for potential users to assess which machine might best meet their requirements. iv INTERNATIONAL STANDARD OISOAEC lSO/lEC 11160-1:1996 (E) Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 1: Class 1 and Class 2 p

14、rinters 1 Scope This part of ISO/IEC 11160 specifies the minimum information that is to be included in the specification sheets of printers so that users may compare the characteristics of different machines and select a printer which meets their requirements. It applies to printers that could be op

15、erated in an office environment. Printers requiring specially equipped rooms or specially instructed operators are not within the scope of this part of ISO/IEC 11160. ISO/IEC 11160 will cover different classes of printers. This part covers Class 1 and Class 2 printers, as defined in annex A. 2 Norma

16、tive references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO/IEC 11160. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of

17、 ISO/IEC 11160 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IS0 216:1975 ) , Writing paper and certain classes of printed matter - Trimmed siz

18、es - A and B series. IS0 269: 1985, Correspondence envelopes - Designation and sizes. IS0 7779: 1988 ) , Acoustics - Measurement of airborne noise emitted by computer and business equipment. IS0 9295:1988, Acoustics - Measurement of high-frequency noise emitted by computer and business equipment. IS

19、0 9296: 1988, Acoustics - Declared noise emission values of computer and business equipment. ISO/IEC 10561:1991 ) , Information technology - Printing devices - Method for measuring printer throughput. IEC 950:1991, Safety of information technology equipment, including electrical business equipment.

20、3 Conformance In order to comply with this part of ISO/IEC 11160, specification sheets shall contain, in the order shown, all items listed in clause 5 which are relevant to the machine being described. 4 Test and measurement conditions Unless otherwise specified, all tests and measurements shall be

21、conducted at the following conditions: - Temperature: 18Cto25”C - Relative humidity: 30 % to 70 % - Line voltage: rated input voltage - Line frequency: rated frequency - Paper size: A4 - Paper weight: 60 g/m2 to 90 g/m2 - Paper transport direction: standard direction ) Currently under revision lSO/l

22、EC 11160-l : 1996 (E) OISO/I EC - Test pattern: as specified Instead of A4 paper size, the size most commonly used in the country may be used, both for the test page and the copies. This shall be indicated in the specification sheet. When weight of paper (g/m2) is given, it is assumed that the paper

23、 has been conditioned in the standard atmosphere defined in IS0 3066 (temperature 20 “C f 2 “C; relative humidity 60 % to 70 %). 5 Information to be included in the specification sheets Table 1 defines, for each parameter, the number and name of the parameter and a short description of the entry. Th

24、ese constitute the information to be included in the specification sheet. The heading of the specification sheet shall indicate that it has been prepared in accordance with this part of ISO/IEC 11160. The numbers and headings of table 1 shall be used. Parameters which are not applicable may be ignor

25、ed; the number of the other parameters shall remain unchanged. The “Remarks and examples” column is provided to help prepare the information sheet, and is not intended to appear in the specification sheet. It is intended to be informative. Test methods to be applied, when not defined in other Intern

26、ational Standards, are defined in this column. Whenever a capacity is given in sheets, the reference paper weight shall be specified. Table 1 - Information to be included Parameter I General data Description of the entry Remarks and examples I .l Printer class Class 1 or Class 2 printer. See annex A

27、 for description of classes. 1.2 Machine name, model and/or model number 1.3 Type Product name, model number. State if the machine is desk- top, portable or floor- standing. 1.4 Printing method The printing process used. Non-impact: ink-jet, thermal transfer. Impact: daisy wheel, dot matrix. 1.5 Dot

28、 density Horizontal and vertical dots Note that the theoretical per 25,4 mm. The design writing resolution and the capability of the machine to actual printing resolution place the dots. may be different. If the dot positioning capability is adjustable, indicate the minimum and maximum capabilities.

29、 1.6 Colour printing 1.6.1 Monochrome Specify which colour. 2 OISO/IEC lSO/lEC 11160-l : 1996 (E) Table 1 (contd) Parameter 1.6.2 Multi-colour Description of the entry Available/not available. Remarks and examples Also known as functional colour, spot colour, highlight or accent colour. State the nu

30、mber of discrete colours that can be printed by colorants residing in the machine. 1.6.3 Full colour 1.6.4 Colour transparencies Available/not available. Available/not available. The full colour is often described as YELLOW, MAGENTA, CYAN Or YELLOW, MAGENTA, CYAN, BLACK. State if the machine can pri

31、nt full colour, continues tone, half-tone or both. Applicable to class 2 printers only Indicate if the colour can be projected. 2 Performance data 2.1 Printer throughput Monochrome pages per Specify if monochrome, hour (PPH) according to IS0 colour or both rates are 10561, colour pages per listed. h

32、our. 2.2 Recommended monthly print volume Manufacturers For the determination of this recommended range of use: parameter, the month is number of pages per month. considered consisting of 20 days of 8 hours each. 3 Control 3.1 Interface for hardware State the hardware Centronics, RS232, others. conn

33、ection connector used. 3.2 Interface for connection Identify communication XON/XOFF. control protocols. 3.3 Interface for printer control Identify printer control IS0 10180, IS0 6429, languages, including IS0 646. version. lSO/lEC 11160-l : 1996 (E) OISO/IEC Table 1 (contd) Parameter 3.3 Memory Desc

34、ription of the entry Remarks and examples 3.3.1 Input buffer 3.3.2 Font memory Size in kilobytes. Size in kilobytes. Optional memory that can be added to support additional fonts or font processing. 4 Printing features 4.1 Printing margins In millimetres, from the top, Area in which printing is not

35、bottom, left and right edges possible.(This area is given of the paper. on the condition that the print paper is fed through its ideal position). If the printing margins vary with paper sizes, this situation should be described. 4.2 Printed image orientation Portrait and/or landscape. The capability

36、 of the printer to print in portrait and landscape orientation without changing the paper feed direction. 5 Fonts and character sets Specify external cartridges or downloadable fonts applicable to this class of printers. The capabilities of the basic machine and the capabilities that can be added by

37、 additional print elements (external cartridges, external print elements, downloaded fonts) shall be clearly identified. 5.1 Basic capability List character sets and fonts Indicate types of fonts supplied with the printer in (Times, Helvetica, OCR-A basic configuration. (IS0 1073-l), OCR-B (IS0 1073

38、-2), others); supported orientation of fonts (portrait, landscape); support for bit- mapped and scaleable fonts per IS0 9541. 4 OISO/IEC ISO/lEC 11160-l : 1996 (E) Table 1 (contd) Parameter 5.2 Optional capability Description of the entry List optional character sets and fonts available from supplie

39、rs. Remarks and examples Indicate additional types of fonts (Times, Helvetica, OCR-A (IS0 1073-l), OCR- B (IS0 1073-2), others); supported orientation of fonts (portrait, landscape); support for bit-mapped and scaleable fonts per IS0 9541. Obtained via external cartridges, downloaded fonts, etc. 5.3

40、 Coded character set List the number of the IS0 6937, IS0 10646, IS0 International Standard or the 8859 l-10, ISO/IEC 10367. registration number. 5.4 Character set List character sets or glyph collections available. IS0 10036. 5.5 Rendition appearance 5.6 Inter-character spacing 5.7 Inter-line spaci

41、ng 6 Output material 6.1 Paper type Indicate which. Normal, italic, bold, bold italic. Indicate character spacing Fixed pitch (10 characters method and maximum and per 25,4 mm), proportional minimum spacing. spacing. Indicate line spacing method Fixed spacing (6,8 lines per and maximum and minimum 2

42、5,4 mm), proportional spacing. spacing. Plain, coated, thermal paper. The manufacturer shall specify for which characteristics of the paper, other than normal paper, normal warranted performance can be assured. 6.2 Special material The manufacturer shall specify the printing materials that can be pr

43、ocessed, possibly with degraded performances, e.g. Transparent sheets, labels, envelopes and recycled paper. lSO/lEC 11160-l : 1996 (E) OISO/IEC Table 1 (contd) Parameter 6.3 Multi-part forms Description of the entry Available/not available. Remarks and examples 1 + n. Indicate the maximum number of

44、 copies (n) and carbons (if applicable). Also indicate the maximum weight of all parts (l+n). Indicate if the print head force is adjustable. 6.4 Paper size State the minimum and maximum width and the minimum and maximum length of the paper. This indication can be given either in millimetres or by q

45、uoting standard paper sizes. 6.4.1 Paper in sheets 6.4.2 Paper in continuous forms (roll or fanfold) Available/not available. A sizes (IS0 216), B sizes Standard name and/or sizes (IS0 216), North American of paper in millimetres. sizes. Available/not available. Indicate if length is manually Width,

46、 maximum and pre-selectable (maximum minimum in millimetres; and minimum); and if the length in meters; diameter paper is cut automatically. of the roll, in millimetres. 6.4.3 Envelopes State minimum and maximum sizes of envelopes that can be printed. Sizes according to IS0 269. 6.5 Paper weight Min

47、imum and maximum in g/m2. Specify if for sheet or roll. 7 Paper handling 7.1 Paper supply device Manual, cassette, tray. Indicate which are standard and which are optional. 7.2 Paper supply capacity For roll paper supply: diameter of the roll. For cut sheets paper supply: number of sheets for each p

48、aper supply device. OISO/IEC lSO/lEC 11160-l : 1996 (E) Table 1 (contd) Parameter 7.3 Paper feed orientation Description of the entry Long edge feed or short edge feed. Remarks and examples Indicate the paper size. B Output handling Indicate any special function. 9 Physical characteristics 9.1 Dimen

49、sions Width x depth x height (all Indicate if it is the envelope expressed in centimetres or around or if trays, knobs or millimetres). other are not included. 9.2 Space required - operation Width x depth (both Varies with options. expressed in centimetres or This parameter includes millimetres). space for operator functions such as paper handling and jam removal. Indicate if it is with or without accessories. 9.3 Space required - maintenance Width x depth (both Varies with options. expressed in centimetres or This parameter includes millimetres). space for access to all service are