ANSI IEEE N42.53-2013 Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland Security.pdf

《ANSI IEEE N42.53-2013 Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland Security.pdf》由会员分享，可在线阅读，更多相关《ANSI IEEE N42.53-2013 Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland Security.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、 American National Standard Performance Criteria for Backpack- Based Radiation-Detection Systems Used for Homeland Security Sponsored by the National Committee on Radiation Instrumentation, N42 IEEE 3 Park Avenue New York, NY 10016-5997 USA Accredited by the American National Standards Institute ANS

2、I N42.53-2013 ANSI N42.53-2013 American National Standard Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland Security Sponsor National Committee on Radiation Instrumentation, N42 Accredited by the American National Standards Institute Secretariat Institute of Elect

3、rical and Electronics Engineers, Inc. Approved 4 June 2013 American National Standards Institute Abstract: The operational and performance requirements for backpack-based radiation-detection systems (BRDs) used in homeland security applications are specified in this standard. BRDs are typically worn

4、 by the user during operation to detect and possibly identify radiological and nuclear material. Keywords: ANSI N42.53, backpack-based radiation-detection systems The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2013 by The Institute o

5、f Electrical and Electronics Engineers, Inc. All rights reserved. Published 30 August 2013. Printed in the United States of America. IEEE and IEEE 802 are registered trademarks in the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom u

6、se can also be obtained through the Copyright Clearance Center. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and

7、 the general public. The existence of an American National Standard does not in any respect preclude anyone, whether he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standard. American National Standards

8、 are subject to periodic reviews and users are cautioned to obtain the latest editions. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken to affirm, revise, or withdraw thi

9、s standard no later than five years from the date of publication. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Authorization to photocopy portions of any individual standard for internal or

10、 personal use is granted by the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 0192

11、3 USA; +1-978-750-8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Copyright 2013 IEEE. All rights reserved. v Notice to users Laws and regulations Users of IEEE Standards documents should con

12、sult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does no

13、t, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These incl

14、ude both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rights in copy

15、right to this document. Updating of IEEE documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE docu

16、ment at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errat

17、a, visit the IEEE-SA Website at http:/standards.ieee.org/index.html or contact the IEEE at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit IEEE-SA Website at http:/standards.ieee.org/index.html. Errata Errata,

18、if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Copyright 2013 IEEE. All rights reserved. vi Patents Attention is called to the possibility that impleme

19、ntation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement

20、of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation

21、 or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifyin

22、g Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements

23、 are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Cop

24、yright 2013 IEEE. All rights reserved. vii Participants At the time it approved this standard, the Accredited Standards Committee on Radiation Instrumentation, N42, had the following members: Michael P. Unterweger, Chair Michael Kipness, Administrative secretary Organization represented Name of repr

25、esentative Canberra Robert Huckins Commerce Dept, U.S. NIST . Leticia Pibida Computer Dependability Associates, LLC . Gary Johnson Consultant Frank X. Masse Department of Homeland SecurityPeter Shebell Harvard University Joseph Ring Health Physics Society Sandy Perle Institute of Electrical & Electr

26、onics Engineers, Inc. . Michael P. Unterweger International Medcom . Don Sythe Lawrence Berkeley National Laboratory .Edward J. Lampo Lawrence Livermore National Laboratory . Dave Trombino NASA, GSFC R. Sachidananda Babu Nuclear Standards Unlimited . Al N. Tschaeche (Deceased) Oak Ridge National Lab

27、oratory Peter J. Chiaro, Jr Charles Britton (Alt.) Ortec Corp. . Frank Sergent Pacific Northwest National Laboratory Richard Kouzes U. S. Army . Chad B. McKee U. S. Nuclear Regulatory Commission Cynthia G. Jones Members-At-Large . Morgan Cox Edward Groeber Ronald M. Keyser Joseph C. McDonald Jack M.

28、 Selby (Deceased) Joseph Stencel At the time this standard was approved, the Subcommittee N42.HSI had the following membership: Michael P. Unterweger, Co-chair Morgan Cox, Co-chair Peter J. Chairo, Jr. David Gilliam Mark Hoover Cynthia G. Jones Ronald Keyser Joseph C. McDonald Leticia Pibida Peter S

29、hebell David Trombino Copyright 2013 IEEE. All rights reserved. viii At the time this standard was approved, ANSI N42.53 Working Group had the following membership: Peter J. Chiaro, Chair Carl Czajkowski Karin Decker Gerard Garino Achim Kreuels Daniel Masi Mikhail Mayorov Steve Mettler Chris Oertel

30、Martin Ohmes Richard Oxford Leticia Pibida Ed Roberts Richard Schueneman Francis Schulcz Keith Spero Adrian Stoian Dave Trombino Steve Tymoszuk Copyright 2013 IEEE. All rights reserved. ix Introduction This introduction is not part of ANSI N42.53-2013, American National Standard Performance Criteria

31、 for Backpack-Based Radiation-Detection Systems Used for Homeland Security. This standard is the responsibility of the Accredited American Standards Committee on Radiation Instrumentation, N42. The standard was approved on N42 letter ballot. Copyright 2013 IEEE. All rights reserved. x Contents 1. Ov

32、erview 1 1.1 Scope . 1 1.2 Purpose 2 2. Normative references 2 3. Definitions, acronyms, and abbreviations 3 3.1 Definitions . 3 3.2 Acronyms and abbreviations . 5 4. General considerations . 6 4.1 BRD evaluation . 6 4.2 Maintaining performance . 6 4.3 Units and uncertainties 6 4.4 Special word usag

33、e 6 4.5 Standard test conditions . 6 4.6 Tests performed under standard test conditions . 7 4.7 Tests performed with variation of influence quantities . 7 4.8 Statistical fluctuations 7 5. Design requirements . 8 5.1 General characteristics . 8 5.2 Physical configuration . 8 5.3 Data storage and com

34、munication interface 9 5.4 Markings .10 5.5 Power supply 10 5.6 Protection of switches .11 5.7 Energy and response range .12 5.8 User interface 12 5.9 Operating parameters 14 5.10 Explosive atmospheres .14 5.11 Diagnostics .14 6. Radiological tests.15 6.1 General .15 6.2 False alarm test .17 6.3 Det

35、ector response to gamma radiation 18 6.4 Detector response to neutron radiation, when provided .19 6.5 Gamma-ray exposure rate indication, when available 19 6.6 Personal protection alarm and response time 20 6.7 Angular dependence and verification of directional indication 20 6.8 Over-range test .20

36、 6.9 Neutron indication in the presence of photons .21 6.10 Detection of gradually increasing radiation levels 21 6.11 Networked area monitors, if applicable 22 6.12 Radionuclide identification, when provided .23 6.13 Natural background variation .27 Copyright 2013 IEEE. All rights reserved. xi 7. E

37、nvironmental performance requirements 28 7.1 Ambient temperature 28 7.2 Relative humidity .29 7.3 Moisture and dust protection 30 7.4 Maritime environment, if required 32 7.5 Extreme temperature start up 33 8. Electrical and electromagnetic performance requirements 35 8.1 Radio frequency (RF) .35 8.

38、2 Radiated emissions .36 8.3 Magnetic field .36 8.4 Electrostatic discharge (ESD) .37 9. Mechanical performance requirements 38 9.1 Vibration .38 9.2 Mechanical shock and drop 40 9.3 Impact (microphonics) 41 10. Documentation 42 10.1 Type test report .42 10.2 Certification 42 10.3 Operation and main

39、tenance manual 42 Annex A (normative) Summary of fluence rate (or flux density) calculations 44 Annex B (normative) Guidance regarding identification performance .46 B.1 Complete & Correct .46 B.2 Incomplete .46 B.3 Incorrect .46 B.4 Incomplete & Incorrect 47 Annex C (informative) Bibliography.48 Co

40、pyright 2013 IEEE. All rights reserved. 1 American National Standard Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland Security IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, health, or environmental protection, or ensure against int

41、erference with or from other devices or networks. Implementers of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. This IEEE document is

42、made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtain

43、ed on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. 1. Overview 1.1 Scope This standard specifies the basic performance requirements for backpack-based radiation-detection systems (BRDs) used in homeland security applications. BRDs shall detect gamma radiation and may

44、 include neutron detection and/or the identification of gamma-ray emitting radionuclides. They are typically worn by the user during operation but may also be used as temporary area monitors. This standard establishes the radiological performance and testing requirements and those requirements assoc

45、iated with the expected electrical, mechanical, and environmental conditions while in use. ANSI N42.53-2013 American National Standard Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland Security Copyright 2013 IEEE. All rights reserved. 2 1.2 Purpose This standard

46、specifies the performance criteria and test methodologies for BRDs that are used to detect gamma-ray emitting radioactive material, detect neutron emitting radioactive material, and/or identify radionuclides. Successful completion of the radiation tests described in this standard should not be const

47、rued as an ability to successfully detect gamma radiation, detect neutron radiation, and/or identify radionuclides in all environments. 2. Normative references The following referenced documents are indispensable for the application of this document (i.e., they must be understood and used, so each r

48、eferenced document is cited in text and its relationship to this document is explained). For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments or corrigenda) applies. ANSI/HPS N13.11, Personnel Dosimetry

49、PerformanceCriteria for Testing.1ANSI N42.42, American National Standard Data Format for Radiation Detectors Used for Homeland Security. Brookhaven National Laboratories, Evaluated Nuclear Structure Data File (ENSDF).2IEC 60068-2-27, Environmental TestingPart 2-27: TestsTest Ea and Guidance: Shock. IEC 60068-2-64, Environmental TestingPart 2-64: TestsTest Fh: Vibration, Broadband Random and Guidance. IEC 60068-2-75, Environmental TestingPart 2-75: TestsTest Eh: Hammer Tests. IEC 60529, Degrees of Protection Provided by Enclosures (IP Code). IEC 61000-4-2, Elect