ANSI CSA AM Z21.41-2014 CSA 6.9-2014 Quick disconnect devices for use with gas fuel appliances (Fourth Edition).pdf

《ANSI CSA AM Z21.41-2014 CSA 6.9-2014 Quick disconnect devices for use with gas fuel appliances (Fourth Edition).pdf》由会员分享，可在线阅读，更多相关《ANSI CSA AM Z21.41-2014 CSA 6.9-2014 Quick disconnect devices for use with gas fuel appliances (Fourth Edition).pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、ANSI Z21.41-2014 CSA 6.9-2014Quick disconnectdevices for use with gasfuel appliancesLegal Notice for StandardsCanadian Standards Association and CSA America, Inc. (operating as “CSA Group”) develop standards through a consensus standardsdevelopment process approved by the Standards Council of Canada

2、 and the American National Standards Institute. This process brings togethervolunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers theprocess and establishes rules to promote fairness in achieving consensus,it does not inde

3、pendently test, evaluate, or verify the content ofstandards.Disclaimerand exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents f

4、itness for a particular purpose or use, its merchantability, or its non-infringementof any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranti

5、es regarding this documents compliance with any applicablestatute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OROFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COST

6、S, OR EXPENSES,HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE,BUSINESS INTERRUPTION, LOST OR DAMAGED DATA,OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OFLIABILITY, ARISING OUT OF OR

7、RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEENADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on beh

8、alf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in a

9、ny way from any and all use of or reliance on the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or o

10、ther documents it publishes.Intellectualpropertyrights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee,of all works contained herein that are protected by copyright, all trade-marks (exc

11、ept as otherwise noted to the contrary), and allinventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patentsand applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure o

12、f this document may violate lawsthat protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress forsuch use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectu

13、al property rights inthis document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be heldresponsible for identifying any or all such patent rights. Users of this standard are expressly advised tha

14、t determination of the validity of any suchpatent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is

15、 in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to h

16、ave such copies,and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy o

17、f this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutesyour

18、acceptance of the terms and conditions of this Legal Notice.Revision HistoryANSI Z21.41-2014 CSA 6.9-2014,Quick disconnectdevices for use withgas fuel appliancesRevision from previous edition Revision symbol (inmargin)Clauses 1.1, 1.2, 4.9, 4.9.1, 4.9.2, 4.9.3, 4.9.5, 4.9.6, 4.9.8, 4.9.9,5.1.1, 5.2.

19、1, and 5.4StandardsUpdateServiceANSI Z21.41-2014 CSA 6.9-2014April 2014Title: Quick disconnect devices for use with gas fuel appliancesTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for

20、 updates to this publication is 2422843.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legalto find out how we protect your personalinformation.CSA Group AmericanNationalStandardsInstituteThe Canadian Standards

21、 Association (operating as CSAGroup), under whose auspices this National Standardhas been produced, was chartered in 1919 andaccredited by the Standards Council of Canada to theNational Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership associationengaged in standar

22、ds development and certificationactivities.CSA Group standards reflect a national consensus ofproducers and users including manufacturers,consumers, retailers, unions and professionalorganizations, and governmental agencies. Thestandards are used widely by industry and commerceand often adopted by m

23、unicipal, provincial, and federalgovernments in their regulations, particularly in thefields of health, safety, building and construction, andthe environment.Individuals, companies, and associations across Canadaindicate their support for CSA Groups standardsdevelopment by volunteering their time an

24、d skills toCommittee work and supporting CSA Groups objectivesthrough sustaining memberships. The more than 7000committee volunteers and the 2000 sustainingmemberships together form CSA Groups totalmembership from which its Directors are chosen.Sustaining memberships represent a major source ofincom

25、e for CSA Groups standards developmentactivities.CSA Group offers certification and testing services insupport of and as an extension to its standardsdevelopment activities. To ensure the integrity of itscertification process, CSA Group regularly andcontinually audits and inspects products that bear

26、 theCSA Group Mark.In addition to its head office and laboratory complex inToronto, CSA Group has regional branch offices inmajor centres across Canada and inspection andtesting agencies in eight countries. Since 1919, CSAGroup has developed the necessary expertise to meetits corporate mission: CSA

27、Group is an independentservice organization whose mission is to provide anopen and effective forum for activities facilitating theexchange of goods and services through the use ofstandards, certification and related services to meetnational and international needs.The American National Standards Ins

28、titute (ANSI), Inc.is the nationally recognized coordinator of voluntarystandards development in the United States throughwhich voluntary organizations, representing virtuallyevery technical discipline and every facet of trade andcommerce, organized labor and consumer interests,establish and improve

29、 the some 10,000 nationalconsensus standards currently approved as AmericanNational Standards.ANSI provides that the interests of the public may haveappropriate participation and representation instandardization activity, and cooperates withdepartments and agencies of U.S. Federal, state andlocal go

30、vernments in achieving compatibility betweengovernment codes and standards and the voluntarystandards of industry and commerce.ANSI represents the interests of the United States ininternational nontreaty organizations such as theInternational Organization for Standardization (ISO)and the Internation

31、al Electrotechnical Commission(IEC). The Institute maintains close ties with regionalorganizations such as the Pacific Area StandardsCongress (PASC) and the Pan American StandardsCommission (COPANT). As such, ANSI coordinates theactivities involved in the U.S. participation in thesegroups.ANSI appro

32、val of standards is intended to verify thatthe principles of openness and due process have beenfollowed in the approval procedure and that aconsensus of those directly and materially affected bythe standards has been achieved. ANSI coordination isintended to assist the voluntary system to ensure tha

33、tnational standards needs are identified and met with aset of standards that are without conflict orunnecessary duplication in their requirements.For further information on CSA Group services, writetoCSA Group5060 Spectrum Way, Suite 100, Mississauga, Ontario,Canada L4W 5N6Responsibility of approvin

34、g American standards restswith theAmerican National Standards Institute, Inc.25 West 43rd Street, Fourth floorNew York, NY 10036ISBN 978-1-77139-434-5 2014 CSA GroupAll rights reserved.No part of this publication may be reproduced in any form whatsoever withoutthe prior permission of the publisher.P

35、ublished in April 2014 by CSA GroupA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mark of the

36、 Canadian Standards Association and CSA America Inc., operating as “CSA Group”American National Standards Institute, Inc.Interprovincial Gas Advisory CouncilApproved on January 13, 2014 by ANSIApproved on October 14,2013 by IGACEffective in Canada June 1, 2015Quick disconnectdevices for use withgas

37、fuel appliancesANSI Z21.41-2014 CSA 6.9-2014ANSI Z21.41-2014 CSA 6.9-2014Quick disconnect devices for use with gas fuel appliancesApril 2014 2014 CSA Group 1ContentsInterprovincial Gas Advisory Council 2CSA Technical Committee on Gas Appliances and Related Accessories 4Z21/83 Technical Committee on

38、Performance and Installation of Gas Burning Appliances and RelatedAccessories 6Z21/CSA Joint Technical Advisory Group on Manually Operated Gas Valves 9Preface 121 Scope 152 Reference publications 163 Definitions 174 Construction 174.1 General 174.2 Dimensions 184.3 Operation 184.4 Safety 194.5 Stren

39、gth 204.6 Materials 254.7 Assembly 254.8 Instructions 254.9 Marking 265 Performance 295.1 Leakage 295.2 Capacity 305.3 Durability at high temperatures 335.4 Continued operation 345.5 Season cracking 345.6 Low temperature operation 345.7 Marking material adhesion and legibility 356 Manufacturingand p

40、roduction tests 35Annex A (Normative) Items unique to Canada 36Annex B Table of conversion factors 37ANSI Z21.41-2014 CSA 6.9-2014Quick disconnect devices for use with gas fuel appliancesApril 2014 2014 CSA Group 2InterprovincialGas AdvisoryCouncilA. Ali Government of Nunavut Community c) Wording of

41、 the proposed change; andd) Rationale for the change.6) To submit a request for interpretation of this Standard, please send the following information toinquiriescsagroup.org and include “Request for interpretation” in the subject line:a) Define the problem, making reference to the specific clause,

42、and, where appropriate, include anillustrative sketch;b) Provide an explanation of circumstances surrounding the actual field condition; andc) Where possible, phrase the request in such a way that a specific “yes” or “no” answer will address theissue.d) Committee interpretations are processed in acc

43、ordance with the CSA Directives and guidelines governingstandardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.ANSI Z21.41-2014 CSA 6.9-2014Quick disconnect devices for use with gas fuel appliancesApril 2014 2014 CSA Group 13History of the developmen

44、t of ANSI Z21.412014 CSA 6.92014Note: This history is informative and is not part of the standard.With the onset of the Free Trade Agreement between the United States and Canada on January 2, 1988,significant attention was given to the harmonization of the United States and Canadian safety standards

45、addressing gas-fired equipment for residential, commercial and industrial applications. It was believedthat the elimination of the differences between the standards would remove potential trade barriers andprovide an atmosphere in which North American manufacturers could market more freely in the Un

46、itedStates and Canada. The harmonization of these standards was also seen as a step toward harmonizationwith international standards. Joint subcommittees were established to facilitate the standardsharmonization process between the United States and Canada.At its meeting of May 12-13, 1993 the Z21/C

47、GA Joint Subcommittee on Standards for Manually-OperatedValves and Quick-Disconnect Devices passed a motion requesting staff to prepare a draft binationalstandard for Quick Disconnect Devices For Use With Gas Fuel Appliances for public review and comment.The first draft harmonized standard was based

48、 on the current coverage from American National Standardfor Quick-Disconnect Devices For Use With Gas Fuel, ANSI Z21.41-1989,Addenda Z21.41a-1990,andZ21.41b-1992,and the National Standard of Canada for Quick Disconnect Devices For Use With Gas Fuel,CAN1-6.9-M79.The first draft was subsequently issue

49、d for public review during September and Octoberof 1995.Following reconsideration and modification of the proposed draft standard, in light of commentsreceived, the joint manual valves subcommittee, at its March 12-13, 1996 meeting, recommended theproposed draft to the Z21 Committee and the CGA Standards Steering Committee for approval.The proposed draft of the harmonized Standard for Quick-Disconnect Devices For Use With Gas FuelAppliances,as modified by the joint subcommittee at its meeting of March 12-13, 1996, was approved bythe Z21/83 Committee by let