ANSI American Society of Safety Engineers A10.48-2016 Criteria for Safety Practices with the Construction Demolition Modification and Maintenance of Communication Structures Americt.pdf

《ANSI American Society of Safety Engineers A10.48-2016 Criteria for Safety Practices with the Construction Demolition Modification and Maintenance of Communication Structures Americt.pdf》由会员分享，可在线阅读，更多相关《ANSI American Society of Safety Engineers A10.48-2016 Criteria for Safety Practices with the Construction Demolition Modification and Maintenance of Communication Structures Americt.pdf（116页珍藏版）》请在麦多课文档分享上搜索。

1、AmericAn n Ation Al St And Ard ANSI/ASSE A10.48 2016 Criteria for Safety Practices with the Construction, Demolition, Modification and Maintenance of Communication Structures American National Standard for Construction and Demolition Operations AmericAn Society of SAfety e ngineerS 4Casselogo-1200dp

2、i_vector-1c-outline.pdf 1 1/20/2012 1:31:55 PM ANSI/ASSE A10.48 2016 ANSI/ASSE A10.48 2016 The information and materials contained in this publication have been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredi

3、ted A10 Committee or individual committee members accept no legal responsibility for the correctness or completeness of this material or its application to specific factual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations

4、will protect the safety or health of any persons, or preserve property. ANSI ANSI/ASSE A10.48 2016 American National Standard Construction and Demolition Operations Criteria for Safety Practices with the Construction, Demolition, Modification and Maintenance of Communication Structures Secretariat A

5、merican Society of Safety Engineers 520 N. Northwest Highway Park Ridge, Illinois 60068 Approved: August 3, 2016 Effective: January 1, 2017 American National Standards Institute, Inc. Approval of an American National Standard requires verification by ANSI that the requirements for due process, conse

6、nsus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a sim

7、ple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether h

8、e/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstance give an interpretation of any American Nat

9、ional Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretation should be addressed to the secretariat or sponsor whose name appears on the title pa

10、ge of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standard

11、s may receive current information on all standards by calling or writing the American National Standards Institute. Published September 2016 by: American Society of Safety Engineers 520 N. Northwest Highway Park Ridge, Illinois 60068 (847) 699-2929 www.asse.org Copyright 2016 by American Society of

12、Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America American National Standard Foreword (This Foreword is not a

13、part of American National Standard A10.48-2016.) This standard is one of a series of safety standards that have been formulated by the Accredited Standards Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a major applic

14、ation in industry, serving as a guide to contractors, labor and equipment manufacturers. For the convenience of users, a list of existing and proposed standards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Pre-Project & Pre-Task Safety & Health P

15、lanning A10.2 Safety, Health and Environmental Training (under development) A10.3 Powder-Actuated Fastening Systems A10.4 Personnel Hoists and Employee Elevators A10.5 Material Hoists A10.6 Demolition Operations A10.7 Transportation, Storage, Handling and Use of Commercial Explosives and Blasting Ag

16、ents A10.8 Scaffolding A10.9 Concrete and Masonry Construction A10.10 Temporary and Portable Space Heating Devices A10.11 Personnel Nets A10.12 Excavation A10.13 Steel Erection A10.15 Dredging A10.16 Tunnels, Shafts and Caissons A10.17 Safe Operating Practices for Hot Mix Asphalt (HMA) Construction

17、A10.18 Temporary Roof and Floor Holes, Wall Openings, Stairways and Other Unprotected Edges A10.19 Pile Installation and Extraction Operations A10.20 Ceramic Tile, Terrazzo, and Marble Work A10.21 Safe Construction and Demolition of Wind Generation/Turbine Facilities (under development) A10.22 Rope-

18、Guided and Non-Guided Workers Hoists A10.23 Safety Requirements for the Installation of Drilled Shafts A10.24 Roofing Safety Requirements for Low-Sloped Roofs A10.25 Sanitation in Construction A10.26 Emergency Procedures for Construction Sites A10.27 Hot Mix Asphalt Facilities A10.28 Work Platforms

19、Suspended from Cranes or Derricks A10.29 Aerial Platforms in Construction (under development) A10.31 Digger-Derricks A10.32 Personal Fall Protection Used in Construction and Demolition Operations A10.33 Safety and Health Program Requirements for Multi-Employer Projects A10.34 Public Protection A10.3

20、7 Debris Nets A10.38 Basic Elements of a Program to Provide a Safe and Healthful Work Environment A10.39 Construction Safety and Health Audit Program A10.40 Reduction of Musculoskeletal Problems in Construction A10.42 Rigging Qualifications and Responsibilities in the Construction Industry A10.43 Co

21、nfined Spaces in Construction and Demolition Operations A10.44 Lockout/Tagout in Construction A10.46 Hearing Loss Prevention A10.47 Highway Construction Safety A10.48 Communication Structures A10.49 Control of Health Hazards One purpose of these standards is to serve as guides to governmental author

22、ities having jurisdiction over subjects within the scope of the A10 Committee standards. If these standards are adopted for governmental use, the reference of other national codes or standards in individual volumes may be changed to refer to the corresponding regulations. Revisions: The A10 Committe

23、e welcomes proposals for revisions to this standard. Revisions are made to the standard periodically (usually five years from the date of the standard) to incorporate changes that appear necessary or desirable, as demonstrated by experience gained from the application of the standard. Proposals shou

24、ld be as specific as possible, citing the relevant section number(s), the proposed wording and the reason for the proposal. Pertinent documentation would enable the A10 Committee to process the changes in a more-timely manner. Interpretations: Upon a request in writing to the Secretariat, the A10 Co

25、mmittee will render an interpretation of any requirement of the standard. The request for interpretation should be clear, citing the relevant section number(s) and phrased as a request for a clarification of a specific requirement. Oral interpretations are not provided. No one but the A10 Committee

26、(through the A10 Secretariat) is authorized to provide any interpretation of this standard. Approval: Neither the A10 Committee nor American National Standards Institute (ANSI) approves, certifies, rates or endorses any item, construction, proprietary device or activity. Appendices: Appendices are i

27、ncluded in most standards to provide the user with additional information related to the subject of the standard. Appendices are not part of the approved standard. Checklists: Checklists included in A10 standards may be copied and used in non- commercial settings only. Committee Meetings: The A10 Co

28、mmittee meets twice per year. Persons wishing to attend a meeting should contact the Secretariat for information. Standard Approval: This standard was processed and approved for submittal to ANSI by the American National Standards Committee on Safety in Construction and Demolition Operations, A10. A

29、pproval of the standard does not necessarily imply (nor is it required) that all Committee members voted for its approval. At the time ANSI approved this standard, the A10 Committee had the following members: Richard King, CSP, Chair Steven Rank, Vice Chair Timothy R. Fisher, CSP, CHMM, ARM, CPEA, S

30、ecretary Ovidiu Munteanu, Assistant Secretary Jennie Dalesandro, Administrative Technical Support Organization Represented Name of Representative Accident Prevention Corporation Frank Burg, CSP, P.E. Terry Krug, CSP, CIH American Insurance Services Group Thad Nosal James G. Borchardt, CSP, CPE, CRIS

31、 ASCE - Construction Institute Committee William R. Nash, P.E. Harlan Fair, P.E. American Society of Safety Engineers Ken Shorter, CSP, ARM, TCDS A. David Brayton, CSP, CPC American Wind Energy Association Christopher Daniels Michele Myers Mihelic American Work Platform Training, Inc. Dennis W. Ecks

32、tine Associated Builders and Contractors, Inc. Ralph Riley Gregory Sizemore Associated General Contractors of America, The Michael McCaffrey Kevin Cannon Association of Union Constructors, The Wayne Creasap, II Kathleen Dobson, CSP, CHST, STS-C A-Z Safety Resources, Inc. Jane F. Williams, CPEA, CCA

33、Barton-Malow Company Jeffrey Oliver Mark Haggenmaker Black & Veatch Richard F. King, CSP John H. Johnson, CSP Building & Construction Trades Department Pete Stafford Chris Trahan, CIH CPWR - Center for Construction Research & Training Bruce Lippy, Ph.D., CIH, CSP Capital Safety Group (3M Corporation

34、) Raymond A. Mann Judd Perner Clark Construction Group Kurt Dunmire, CSP, CHST Cole-Preferred Safety Consulting, Inc. Barry Cole Philip L. Colleran Philip L. Colleran, CSP Construction & Realty Safety Group, Inc. Ron Lattanzio Frank Marino Edison Electric Institute R. Lee Reed, Jr. Elevator Industry

35、 Work Preservation Fund Michael D. Morand James Demmel Ellis Fall Safety Solutions J. Nigel Ellis, Ph.D., P.E., CSP, CPE John T. Whitty, P.E. Engineering Systems, Inc. David Ahearn, P.E. Edward J. Tuczak, P.E. Fluor Corporation Michael Weatherred, CSP Craig Clairmont, CIH Gilbane Building Co. Anthon

36、y ODea, CSP, CHST Charles Praul, Jr., CSP Richard D. Hislop Richard Hislop Shawn Bradfield Independent Electrical Contractors, Inc. John P. Masarick Jerry Rivera Innovative Safety, LLC Daniel M. Paine Barbara Paine Institute of Makers of Explosives Susan JP Flanagan Ronald Thomas Insulators Internat

37、ional Union Terry Lynch Jim E. Lapping, MS, P.E., CSP International Association of Bridge, Structural, Ornamental and Reinforcing Iron Workers Steven Rank International Brotherhood of Boilermakers Mark Garrett Bridget Connors International Brotherhood of Electrical Workers David Mullen International

38、 Brotherhood of Teamsters LaMont Byrd, CIH Asher Tobin International Safety Equipment Association Cristine Fargo International Union of Bricklayers & Allied Craftworkers Michael Kassman, CHST Gerard Scarano International Union of Operating Engineers Barbara McCabe Jack L. Mickle & Associates Jack Mi

39、ckle, Ph.D., P.E. Steve Stock, P.E., PLS Kiewit power Constructors Co. Rusty Brown, CSP Jason Scollin, CSP Laborers International Union of North America Scott Schneider, MS, CIH Walter A. Jones, MS, CIH Lamar Advertising Chuck Wigger, CSP Micky Vint Lend Lease Joel Pickering, CET, CHMM Michael Lentz

40、 Liberty Mutual Insurance Daniel P. Lavoie, CSP, ARM Stan Williams, ARM, CHST Marsh USA, Inc. Timothy Bergeron, CSP Maryland Occupational Safety & Health Mischelle Vanreusel Michael Daughaday Mechanical Contractors Association of America Peter Chaney, MS, CSP Dennis Langley National Association of H

41、ome Builders Robert Matuga Chelsea Vetick National Association of Railroad Safety Consultants & Investigators Lewis Barbe, P.E., CSP, CRSP National Electrical Contractors Association Michael J. Johnston Wesley Wheeler National Institute for Occupational Safety & Health Thomas G. Bobick, Ph.D., P.E.,

42、 CSP, CPE G. Scott Earnest, Ph.D., P.E, CSP National Railroad Contractors & Maintenance Association Jeffrey D. Meddin, CSP, CHEP, CHCM National Roofing Contractors Association Harry Dietz Tom Shanahan National Society of Professional Engineers E. Ross Curtis, P.E., DFE Paul Swanson, P.E. Operative P

43、lasterers and Cement Masons International Association Deven Johnson Phoenix Fabricators and Erectors, Inc. Luke Humphrey Frank Massey Powder Actuated Tool Manufacturers Institute James A. Borchers Craig Pratt Power Consultants, Incorporated David Goldsmith Camille Villanova Professional Safety Consu

44、ltants, Inc. Jim E. Lapping, MS, P.E., CSP Anthony Brown Ryland Group, Inc., The Bob Masterson, CSP Safety Environmental Engineering, Inc. Matthew Murphy Elliot Niefeld Scaffolding, Shoring & Forming Institute Granville Loar Shafer Safety Solutions, LLC Carmen Shafer, CSP, CHST, CRIS Sheet Metal & A

45、ir Conditioning Contractors National Association Mike McCullion, CSP, ARM Sheet Metal Workers International Association Randall Krocka Charles Austin, MS SPA, Incorporated Stanley Pulz, CSP, P.E. Turner Construction Company Cindy L. DePrater, ALCM Paul Huntley United Association of Plumbers and Pipe

46、fitters Rich Benkowski United Brotherhood of Carpenters and William Irwin Joiners of America Dale Shoemaker United Union of Roofers, Waterproofers and Allied Workers Keith J. Vitkovich U.S. Department of the Army Corps of Engineers Brian Becker, MS Andrew Blaisdell, MS, EI U.S. Department of Energy

47、Bill R. McArthur, Ph.D., CIH Terry Meisinger West Virginia University Extension Service Brandon Takacs, CSHM Mark Fullen, Ed.D., CSP ZBD Constructors (Zurn Industries) Greg Thompson, CSP Jeffrey D. Meddin, CSP, CHEP, CHCM Independent Experts & Observers: Balfour Beatty Construction, LLC Charles Bird

48、 PAR Electrical Contractors Steven T. Theis Lee Boulanger Subgroup A10.48 had the following members: Gordon Lyman, Chair Scott Kisting J. Nigel Ellis, Ph.D., P.E., CSP, CPE, Liaison Loui McCurley Lewis Barbe, P.E., CSP, CRSP Robert Medlock Jeremy Buckles Miles Mellor Pat Cipov Eric Munsell, CSP Robe

49、rt E. Clouse, CSP, CHST Daniel M. Paine Jim W. Coleman Clay Parchewsky Drue Ann Conley Marina Perilli Sean Cooper Michael Serpe, CSP Ed Dennis Terry Sharp Joey Deuer Tom Silliman, P.E. Don Doty Kathryn L. Stieler Kevin Dougherty Shelly Trego Kyle Fulton Jocko Vermillion Jim Goldwater Wesley Weis Ed Hartmann, III Jane Williams, CPEA, CCA John Paul Jones Ernie Jones Contents SECTION PAGE 1. General . 14 1.1 Scope . 14 1.2 Application 14 1.3 History 14 2. References . 14 3. Definitions . 15 4. Pre-Job Planning 23 4.1 Objective 23 4.2 Risk Assessment 23 4.3 Scope of Work (SOW)