BS PD ISO TS 13399-308-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts《切削工具数据的表示和交换 三维模型的创建和交换 用于可转位刀.pdf

《BS PD ISO TS 13399-308-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts《切削工具数据的表示和交换 三维模型的创建和交换 用于可转位刀.pdf》由会员分享，可在线阅读，更多相关《BS PD ISO TS 13399-308-2016 Cutting tool data representation and exchange Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts《切削工具数据的表示和交换 三维模型的创建和交换 用于可转位刀.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication PD ISO/TS 13399-308:2016 Cutting tool data representation and exchange Part 308: Creation and exchange of 3D models Milling cutters with arbor hole for indexable insertsPD ISO/TS 13399-308:2016 PUBLISHED DOCUMENT National foreword This Published Document is the UK implement

2、ation of ISO/TS 13399-308:2016. The UK participation in its preparation was entrusted to Technical Committee MTE/18, Tools tips and inserts for cutting applications. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport t

3、o include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 92322 7 ICS 25.100.01; 35.240.50 Compliance with a British Standard cannot confer immunity from lega

4、l obligations. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 29 February 2016. Amendments issued since publication Date Text affectedPD ISO/TS 13399-308:2016 ISO 2016 Cutting tool data representation and exchange Part 308: Creation and ex

5、change of 3D models Milling cutters with arbor hole for indexable inserts Reprsentation et change des donnes relatives aux outils coupants Partie 308: Cration et change des modles 3D Fraises mtaux trou de fixation et plaquettes amovibles TECHNICAL SPECIFICATION ISO/TS 13399-308 Reference number ISO/

6、TS 13399-308:2016(E) First edition 2016-02-01PD ISO/TS 13399-308:2016ISO/TS 13399-308:2016(E)ii ISO 2016 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized othe

7、rwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office

8、 Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.orgPD ISO/TS 13399-308:2016ISO/TS 13399-308:2016(E)Foreword v Introduction vii 1 Scope . 1 2 Normative references 1 3 Starting elements, coordinate systems, planes 2 3

9、.1 General . 2 3.2 Reference system 2 3.3 Coordinate system at the cutting part 3 3.4 Planes 3 3.5 Design of the pocket seat and cutting reference point (CRP) of the insert . 4 3.6 Adjustment coordinate system on workpiece side 7 3.6.1 General 7 3.6.2 Designation of the coordinate system workpiece s

10、ide . 8 4 Design of the model . 9 4.1 General . 9 4.2 Necessary parameters for the connection interface feature 10 4.3 Necessary properties for inserts 10 4.3.1 General.10 4.3.2 Properties for equilateral, equiangular and equilateral, nonequiangular inserts 10 4.3.3 Properties for nonequilateral, eq

11、uiangular and nonequilateral, nonequiangular inserts .11 4.3.4 Design of the pocket seat feature12 5 Face milling cutter .12 5.1 General 12 5.2 Necessary properties 13 5.3 Basic geometry .13 5.4 Determination of the position of the mounting coordinate system of insert 14 5.5 Chip flute and pocket se

12、at 15 5.6 Face milling cutter, assembly .16 6 Shoulder milling cutter .17 6.1 General 17 6.2 Necessary properties 17 6.3 Basic geometry .17 6.4 Determination of the position of the mounting coordinate system of insert 17 6.5 Chip flute and pocket seat 18 6.6 Shoulder milling cutter, assembly .18 7 P

13、lain milling cutter .19 7.1 General 19 7.2 Necessary properties 19 7.3 Basic geometry .20 7.4 Determination of the position of the mounting coordinate system of insert 20 7.5 Chip flute and pocket seat 21 7.6 Plain milling cutter, assembly23 8 Shell milling cutter 23 8.1 General 23 8.2 Necessary pro

14、perties 24 8.3 Basic geometry .24 8.4 Determination of the position of the mounting coordinate system of insert 25 8.5 Chip flute and pocket seat 25 8.6 Shell milling cutter, assembly 25 9 Full-side-slot milling cutter 25 ISO 2016 All rights reserved iii Contents PagePD ISO/TS 13399-308:2016ISO/TS 1

15、3399-308:2016(E)9.1 General 25 9.2 Necessary properties 26 9.3 Basic geometry .26 9.4 Determination of the position of the mounting coordinate system of insert 27 9.5 Chip flute and pocket seat 28 9.6 Assembly of a full-side slot milling cutter 30 10 Half-side slot milling cutter .31 10.1 General 31

16、 10.2 Necessary properties 31 10.3 Basic geometry .31 10.4 Determination of the position of the mounting coordinate system of insert 31 10.5 Chip flute and pocket seat 32 10.6 Half-side slot milling cutter, assembly .32 11 F ull-side pr ofile slot milling cutt er .33 11.1 General 33 11.2 Necessary p

17、roperties 33 11.3 Basic geometry .34 11.4 Determination of the position of the mounting coordinate system of insert 34 11.5 Chip flute and pocket seat 34 11.6 Full-side profile slot milling cutter, assembly34 12 Full-side angular slot milling cutter 35 12.1 General 35 12.2 Necessary properties 35 12

18、.3 Basic geometry .36 12.4 Determination of the position of the mounting coordinate system of insert 36 12.5 Chip flute and pocket seat 36 12.6 Full-side angular slot milling cutter, assembly .36 13 Saw blade/slitting cutter 36 13.1 General 36 13.2 Necessary properties 37 13.3 Basic geometry .37 13.

19、4 Determination of the position of the mounting coordinate system of insert 38 13.5 Chip flute and pocket seat 40 13.6 Saw blade/slitting cutter, assembly .41 14 Design of details .42 14.1 Basics for modelling 42 14.2 Fixing threads for inserts 42 14.3 Contact surfaces/drive keys Orientation .42 14.

20、4 Chamfers, roundings, others 42 15 Attributes of surfaces Visualization of the model features 42 16 Structure of the design elements (tree of model) .42 17 Data exchange model 43 Annex A (informative) Information about nominal dimensions 45 Bibliography .46 iv ISO 2016 All rights reservedPD ISO/TS

21、13399-308:2016ISO/TS 13399-308:2016(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member bod

22、y interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrote

23、chnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of IS

24、O documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held re

25、sponsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information gi

26、ven for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the follow

27、ing URL: Foreword - Supplementary information The committee responsible for this document is ISO/TC 29, Small tools. ISO/TS 13399 consists of the following parts, under the general title Cutting tool data representation and exchange: Part 1: Overview, fundamental principles and general information m

28、odel Part 2: Reference dictionary for the cutting items Technical Specification Part 3: Reference dictionary for tool items Technical Specification Part 4: Reference dictionary for adaptive items Technical Specification Part 5: Reference dictionary for assembly items Technical Specification Part 50:

29、 Reference dictionary for reference systems and common concepts Technical Specification Part 60: Reference dictionary for connection systems Technical Specification Part 80: Creation and exchange of 3D models Overview and principles Technical Specification Part 100: Definitions, principles and metho

30、ds for reference dictionaries Technical Specification Part 150: Usage guidelines Technical Specification Part 201: Creation and exchange of 3D models Regular inserts Technical Specification Part 202: Creation and exchange of 3D models Irregular inserts Technical Specification Par t 203: Cr e at ion

31、and e xc hange of 3D mo de l s Re plac e able in s e r t s f or dr illing Technical Specification Part 204: Creation and exchange of 3D models Inserts for reaming Technical Specification Part 301: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of thread

32、cutting taps, threadforming taps and threadcutting dies Technical Specification ISO 2016 All rights reserved vPD ISO/TS 13399-308:2016ISO/TS 13399-308:2016(E) Part 302: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of solid drills and countersinking to

33、ols Technical Specification Part 303: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of end mills with solid cutting edges Technical Specification Part 304: Concept for the design of 3D models based on properties according to ISO/TS 133993: Modelling of

34、 milling cutters with arbor hole and solid cutting edges Technical Specification Part 307: Creation and exchange of 3D models End mills for indexable insert s Technical Specification Part 308: Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts Technical Specific

35、ation Part 309: Creation and exchange of 3D models Tool holders for indexable inserts Technical Specification Part 311: Creation and exchange of 3D models Solid reamers Technical Specification Part 312: Creation and exchange of 3D models Reamers for indexable inserts Technical Specification Part 401

36、: Creation and exchange of 3D models Converting, extending and reducing adaptive items Technical Specification Part 405: Creation and exchange of 3D models Collets Technical Specification The following parts are under preparation: Part 70: Graphical data layout Layer settings for tool designs Techni

37、cal Specification Part 71: Graphical data layout Creation of documents for the standardized data exchange Graphical product information Technical Specification Part 72: Creation of documents for the standardized data exchange Definition of properties for drawing header and their XMLdata exchange Tec

38、hnical Specification Part 305: Creation and exchange of 3D models Modular tooling systems with adjustable cartridges for boring Technical Specification Par t 310: Creat ion and exchange of 3D model s Tur ning t ool s w it h carbide t ips Technical Specificationvi ISO 2016 All rights reservedPD ISO/T

39、S 13399-308:2016ISO/TS 13399-308:2016(E) Introduction This part of ISO/TS 13399 defines the concept, the terms and the definitions on how to design simplified 3D models of milling cutters with arbors hole for indexable inserts that can be used for NC- programming, simulation of the manufacturing pro

40、cesses and the determination of collision within machining processes. It is not intended to standardize the design of the cutting tool itself. A cutting tool is used in a machine to remove material from a workpiece by a shearing action at the cutting edges of the tool. Cutting tool data that can be

41、described by the ISO/TS 13399 series include, but are not limited to, everything between the workpiece and the machine tool. Information about inserts, solid tools, assembled tools, adaptors, components and their relationships can be represented by the ISO/TS 13399 series. The increasing demand prov

42、iding the end-user with 3D models for the purposes defined above is the basis for the development of this series of International Standards. The objective of this International Standard is to provide the means to represent the information that describes cutting tools in a computer sensible form that

43、 is independent from any particular computer system. The representation will facilitate the processing and exchange of cutting tool data within and between different software systems and computer platforms and support the application of this data in manufacturing planning, cutting operations and the

44、 supply of tools. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing and sharing product databases and for archiving. The methods that are used for these representations are those developed by ISO/TC 184 for the representation of

45、 product data by using standardized information models and reference dictionaries. Definitions and identifications of dictionary entries are defined by means of standard data that consist of instances of the EXPRESS entity data types defined in the common dictionary schema, resulting from a joint ef

46、fort between ISO/TC 184/SC 4 and IEC/TC 3/SC 3D and in its extensions defined in ISO 13584-24 and ISO 13584-25. ISO 2016 All rights reserved viiPD ISO/TS 13399-308:2016PD ISO/TS 13399-308:2016Cutting tool data representation and exchange Part 308: Creation and exchange of 3D models Milling cutters w

47、ith arbor hole for indexable inserts 1 Scope This part of ISO/TS 13399 specifies a concept for the design of tool items, limited to any kind of milling cutters with arbor hole for indexable inserts, together with the usage of the related properties and domains of values. This part of ISO/TS 13399 sp

48、ecifies a common way of design simplified models that contain the following: definitions and identifications of the design features of milling cutters with arbor hole for indexable inserts, with an association to the used properties; definitions and identifications of the internal structure of the 3

49、D model that represents the features and the properties of milling cutters with arbor hole for indexable inserts. The following are outside the scope of this part of ISO/TS 13399: applications where these standard data may be stored or referenced; concept of 3D models for cutting tools; concept of 3D models for cutting items; concept of 3D models for other too