BS PD CEN ISO TS 14907-1-2015 Electronic fee collection Test procedures for user and fixed equipment Description of test procedures《电子收费系统 用户设备和固定设备的试验过程 试验规程描述》.pdf

《BS PD CEN ISO TS 14907-1-2015 Electronic fee collection Test procedures for user and fixed equipment Description of test procedures《电子收费系统 用户设备和固定设备的试验过程 试验规程描述》.pdf》由会员分享，可在线阅读，更多相关《BS PD CEN ISO TS 14907-1-2015 Electronic fee collection Test procedures for user and fixed equipment Description of test procedures《电子收费系统 用户设备和固定设备的试验过程 试验规程描述》.pdf（102页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication PD CEN ISO/TS 14907-1:2015 Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test proceduresPD CEN ISO/TS 14907-1:2015 PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN ISO/TS 14907-1:201

2、5. It supersedes DD CEN ISO/TS 14907-1:2010 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems. A list of organizations represented on this committee can be obtained on request to its secretary. This publication doe

3、s not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 89064 2 ICS 35.240.60; 43.040.15 Compliance with a British Standard cannot confer imm

4、unity from legal obligations. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 September 2015. Amendments issued since publication Date Text affected TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 14907

5、-1 September 2015 ICS 43.040.15; 35.240.60 Supersedes CEN ISO/TS 14907-1:2010 English Version Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015) Perception du tlpage - Modes opratoires relatifs aux quipements embarq

6、us et aux quipements fixes - Partie 1: Description des modes opratoires (ISO/TS 14907-1:2015) Elektronische Gebhrenerhebung - Testverfahren fr straenseitige und fahrzeugseitige Einrichtungen - Teil 1: Beschreibung von Testverfahren (ISO/TS 14907- 1:2015) This Technical Specification (CEN/TS) was app

7、roved by CEN on 10 August 2015 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Stand

8、ard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decisi

9、on about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, It

10、aly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Av

11、enue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TS 14907-1:2015 EPD CEN ISO/TS 14907-1:2015 CEN ISO/TS 14907-1:2015 (E) 3 European foreword This document (CEN ISO/TS 14907-1:2015) has been

12、prepared by Technical Committee ISO/TC 204 “Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent transport systems” the secretariat of which is held by NEN. Attention is drawn to the possibility that some of the elements of this document may be the subject

13、 of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN ISO/TS 14907-1:2010. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Accord

14、ing to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germ

15、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO/TS 14907-1:2015 has been approved by CEN as CEN ISO/T

16、S 14907-1:2015 without any modification. PD CEN ISO/TS 14907-1:2015ISO/TS 14907-1:2015(E)Foreword iv Introduction v 1 Scope . 1 2 Normative references 3 3 Terms and definitions . 3 4 Abbreviated terms 6 5 Test parameters and test procedures for EFC 7 5.1 Tests overview . 7 5.1.1 General 7 5.1.2 Func

17、tionality tests 7 5.1.3 Quality tests . 8 5.1.4 Referenced pre-tests . 8 5.2 Parameter overview . 8 5.3 Test plan .15 5.4 Required documentation 15 6 Inspection and tests .16 6.1 Functionality tests .16 6.1.1 Communication 16 6.1.2 EFC application 16 6.1.3 Traffic conditions 21 6.1.4 Vehicle charact

18、eristics22 6.1.5 Environmental influences .24 6.2 Quality tests 25 6.2.1 Quality management .25 6.2.2 Reliability and availability 26 6.3 Referenced pre-tests .26 6.3.1 DSRC 26 6.3.2 Environment .27 6.3.3 EMC.27 7 Evaluation and certification 27 7.1 Evaluation .27 7.2 Certification 27 Annex A (infor

19、mative) How to use this Technical Specification 29 Annex B (informative) Traffic, vehicle, and other performance tests .31 Annex C (informative) Reliability/availability tests 52 Annex D (informative) Classes of equipment .58 Annex E (informative) Examples for statistical calculations 60 Annex F (in

20、formative) Examples of referenced pre-tests based on European test procedures .64 Annex G (informative) Test methods and tools 69 Annex H (informative) Examples of EFC scenarios .77 Annex I (informative) Examples of referenced pre-tests based on Japanese test procedures 85 Bibliography .88 ISO 2015

21、All rights reserved iii Contents PagePD CEN ISO/TS 14907-1:2015ISO/TS 14907-1:2015(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out th

22、rough ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collab

23、orates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approva

24、l criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the sub

25、ject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any tra

26、de name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the T

27、echnical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/TC 204, Intelligent transport systems. This third edition cancels and replaces the second edition (ISO/TS 14907-1:2010). It also incorporates the Technical

28、Corrigenda ISO/TS 14907-1:2010/Cor.1:2010. The main changes are related to the revision of the references. ISO/TS 14907 consists of the following parts, under the general title Electronic fee collection Test procedures for user and fixed equipment: Part 1: Description of test procedures Part 2: Conf

29、ormance test for the onboard unit application interfaceiv ISO 2015 All rights reservedPD CEN ISO/TS 14907-1:2015ISO/TS 14907-1:2015(E) Introduction For an electronic fee collection (EFC) system, approvals and tests are required to determine whether the system (or individual components of the system)

30、 conforms to standards and application requirements and to enable parameters such as quality, availability, and maintainability to be measured. There are complete EFC systems available, including documentation and approvals, and these could already be in operation in some European countries. This pa

31、rt of ISO/TS 14907 provides a toolbox of tests and procedures for the assessment and proof of such EFC systems that they are suitable for specified EFC applications under specific operational conditions. Dependent on a system to be tested and based on the available documentation and the status of pr

32、eviously performed approvals, this part of ISO/TS 14907 enables parties involved, e.g. system provider, operators, and test houses, to take into consideration already proven references and to identify such parameters which still have to be tested according to the specified applications. At the time

33、of publication of this part of ISO/TS 14907, the determination of common system requirements for Europe (or any other region) has not been agreed. For this reason, this part of ISO/TS 14907 does not specify any particular performance requirements, unless these are already determined elsewhere (such

34、as safety or radio regulations), but rather identifies the key parameters which will comprise such requirements. Where reference to an existing test is available, this part of ISO/TS 14907 provides that reference. This part of ISO/TS 14907 defines only the test and test procedures, not the benchmark

35、 figures that these are to be measured against. Benchmark figures which the systems or components under test can be compared with and validated against might form the subject of a future part of this Technical Specification. Within the framework of the European Electronic Toll System (EETS), this pa

36、rt of ISO/TS 14907 could provide inputs for the work of the notified bodies in view to certify the different systems part of the EETS in particular to check the suitability for use. This part of ISO/TS 14907 is furthermore limited to automated (electronic) payment using a standardized dedicated shor

37、t-range communication (DSRC). The scope of this part of ISO/TS 14907 does not include manual payment, conventional money transaction, nor payment by means of sticker, vignettes, tickets, or magnetic-stripe cards, etc. The applications to which EFC is related are toll collection, road pricing, parkin

38、g, and individual traffic information. This part of ISO/TS 14907 enables groups of operators to determine common specific performance levels and operating conditions and to enable regional variation where appropriate. It provides operating and environmental parameters (or classes of operating and en

39、vironmental parameters) within which such systems shall successfully function without impairing interoperability to ensure that the person who specified the system can state their requirements clearly to implementation designers and integrators and to enable the measurement of the performance of suc

40、h systems. The following guidelines have been followed when selecting the test procedures for test parameters: reference as far as possible to existing standardized test procedures; focusing on those tests that are essential to ensure that EFC equipment is able to exchange information and mutually u

41、se the exchanged information. A brief guide describing how to use this part of ISO/TS 14907 is provided by Annex A. While this part of ISO/TS 14907 relates to general test procedures, certain provisions relate specifically to test procedures for certification purposes. Many features of this part of

42、ISO/TS 14907 are relevant internationally; it is recognized that due to different regulatory requirements outside Europe, extension may be required to make its applicability as comprehensive in non-EU countries, before this International Standard can be reviewed for acceptance as in EU countries. Th

43、e ISO/TS 17444 series provides an examination framework for EFC charging performance. ISO 2015 All rights reserved vPD CEN ISO/TS 14907-1:2015PD CEN ISO/TS 14907-1:2015Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures 1 Scope This part of I

44、SO/TS 14907 specifies the test procedures of EFC roadside equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically. The scope of this part of ISO/TS 149

45、07 is restricted to systems operating within the radio emission, electromagnetic compatibility (EMC) regulations, traffic, and other regulations of the countries in which they are operated. This part of ISO/TS 14907 identifies a set of suitable parameters and provides test procedures to enable the p

46、roof of a complete EFC system, as well as components of an EFC system, e.g. OBE, related to the defined requirements of an application. The defined parameter and tests are assigned to the following groups of parameters: functionality; quality; referenced pre-tests. An overview of the tests and param

47、eters provided by this part of ISO/TS 14907 is given in 5.1 and 5.2. This part of ISO/TS 14907 describes procedures, methods and tools, and a test plan which shows the relation between all tests and the sequence of these tests. It lists all tests that are required to measure the performance of EFC e

48、quipment. It describes which EFC equipment is covered by the test procedures; the values of the parameters to be tested are not included. It also describes how the tests are to be performed and which tools and prerequisites are necessary before this series of tests can be undertaken. It is assumed t

49、hat the security of the system is inherent in the communications and EFC functionality tests, therefore they are not addressed here. All tests in this part of ISO/TS 14907 provide instructions to evaluate the test results. The test procedures can be used for prototype testing, type approvals, test of installations, and periodic inspections. Thus this part of ISO/TS 14907 defines only the test and test procedures, not the benchmark figures that these are to be measured against. Related to a conceptual model of an EFC system, this part of