EN 50491-12-1-2018 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid - Applic.pdf

《EN 50491-12-1-2018 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid - Applic.pdf》由会员分享，可在线阅读，更多相关《EN 50491-12-1-2018 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid - Applic.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid - Application specification - Interface and framework for customerPart 12-1: Interface

2、 between the CEM and Home/Building Resource manager - General Requirements and ArchitectureBS EN 50491-12-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50491-12-1 July 2018 ICS 97.120 English Version General requirements for Home and Building Electronic Systems (HBES) and Building Autom

3、ation and Control Systems (BACS) - Smart grid - Application specification - Interface and framework for customer - Part 12-1: Interface between the CEM and Home/Building Resource manager - General Requirements and Architecture Exigences gnrales relatives aux systmes lectroniques pour les foyers dome

4、stiques et les btiments (HBES) et aux systmes de gestion technique du btiment (SGTB) Rseau intelligent Spcification dapplication Interface et cadre pour le client - Partie 12-1 : Interface entre le gestionnaire dnergie pour le client (CEM, Customer Energy Manager) et le gestionnaire de ressources po

5、ur foyers domestiques/ btiments. Exigences et Architecture gnrales Allgemeine Anforderungen an die Elektrische Systemtechnik fr Heim und Gebude (ESHG) und an Systeme der Gebudeautomation (GA) - Smart grid - Anwendungsspezifikaion - Struktur der Schnittstelle fr Anwender - Teil 12-1: Schnittstelle zw

6、ischen CEM und Heim-/Gebude-Ressourcenmanager - Allgemeine Anforderungen und Architektur This European Standard was approved by CENELEC on 2018-06-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the st

7、atus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, Fren

8、ch, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria,

9、 Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia,

10、Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All ri

11、ghts of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50491-12-1:2018 E National forewordThis British Standard is the UK implementation of EN 50491121:2018. The UK participation in its preparation was entrusted to Technical Committee IST/6/12, Home Ele

12、ctronic Systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Publish

13、ed by BSI Standards Limited 2018ISBN 978 0 580 98930 8ICS 97.120Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2018.Amendments/corrigenda issued since

14、publicationDate Text affectedBRITISH STANDARDBS EN 50491121:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50491-12-1 July 2018 ICS 97.120 English Version General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid -

15、Application specification - Interface and framework for customer - Part 12-1: Interface between the CEM and Home/Building Resource manager - General Requirements and Architecture Exigences gnrales relatives aux systmes lectroniques pour les foyers domestiques et les btiments (HBES) et aux systmes de

16、 gestion technique du btiment (SGTB) Rseau intelligent Spcification dapplication Interface et cadre pour le client - Partie 12-1 : Interface entre le gestionnaire dnergie pour le client (CEM, Customer Energy Manager) et le gestionnaire de ressources pour foyers domestiques/ btiments. Exigences et Ar

17、chitecture gnrales Allgemeine Anforderungen an die Elektrische Systemtechnik fr Heim und Gebude (ESHG) und an Systeme der Gebudeautomation (GA) - Smart grid - Anwendungsspezifikaion - Struktur der Schnittstelle fr Anwender - Teil 12-1: Schnittstelle zwischen CEM und Heim-/Gebude-Ressourcenmanager -

18、Allgemeine Anforderungen und Architektur This European Standard was approved by CENELEC on 2018-06-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterati

19、on. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language mad

20、e by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech R

21、epublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Unite

22、d Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any mean

23、s reserved worldwide for CENELEC Members. Ref. No. EN 50491-12-1:2018 E BS EN 50491121:2018EN 50491-12-1:2018 (E) 2 Contents Page European foreword 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviations 5 3.1 Terms and definitions 5 3.2 Abbreviations 8 4 Design co

24、nsiderations 8 4.1 General 8 4.2 Data security / privacy design guidelines 8 4.2.1 General 8 4.2.2 Data security / privacy on the smart grid side 8 4.2.3 Data security / privacy on premises side 9 4.2.4 Customer Energy Management System security 9 4.3 Device type agnostic energy management 9 4.4 Clo

25、ck alignment 9 5 Background 9 6 Smart Grid premises side Architecture 12 6.1 General 12 6.2 Smart Grid Connection Point (SGCP) 14 6.3 Energy Management Gateway (EMG) 14 6.4 Interface S1 15 6.5 Customer Energy Manager (CEM) 15 6.6 Interface S2 16 6.7 Resource manager 16 6.8 HBES, SASS and Smart Devic

26、es 17 7 User Stories and Use Cases 17 7.1 Requirements for interoperability 17 7.2 Determining the requirements for Interface S2 18 7.3 Extensibility of S2 Requirements 18 Annex A (informative) Use Case example 19 Bibliography 22 BS EN 50491121:2018EN 50491-12-1:2018 (E) 3 European foreword This doc

27、ument (EN 50491-12-1:2018) has been prepared by the Technical Committee CLC/TC 205, “Home and Building Electronic Systems (HBES)”. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsem

28、ent (dop) 2019-06-18 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2021-06-18 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identi

29、fying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. EN 50491-12-1 is part of the EN 50491 series of European Standards - General requirements for Home and Building Electronic Systems

30、 (HBES) and Building Automation and Control Systems (BACS) - which will comprise the following parts: Part 1: General requirements; Part 2: Environmental Conditions; Part 3: Electrical Safety Requirements; Part 4-1: General functional safety requirements for products intended to be integrated in Bui

31、lding Electronic Systems (HBES) and Building Automation and Control Systems (BACS); Part 5-1: EMC requirements, conditions and test set-up; Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment; Part 5-3: EMC requirements for HBES/BACS used in indust

32、ry environment Part 6-1: HBES installations - Installation and planning; Part 6-3: HBES installations - Assessment and definition of levels; Part 11: Smart Metering Application Specification Simple External Consumer Display; Part 12: Smart grid - Application specification - Interface and framework f

33、or customer; Part 12-1: Interface between the CEM and Home/Building Resource manager General Requirements and Architecture Future Part 12-2: Interface between the Home/Building CEM and Resource manager(s) Data model and messaging Future Part 12-3: Home/Building Customer Energy Manager (CEM) Future P

34、art 12-4: Resource manager BS EN 50491121:2018EN 50491-12-1:2018 (E) 4 Introduction Traditional electricity networks make use of a primarily one-way flow of energy and communication from the generator to the consumer via the transmission and distribution systems. Although there is some monitoring an

35、d control of equipment in the transmission and distribution systems, there is no communication with, or control of, consumer equipment. In particular, there is no means of requesting short-term control of consumer equipment according to generation and/or transmission/distribution grid conditions. Ge

36、neration equipment is controlled according to the open-ended (uncontrolled) demand of the consumer. Today we are faced with an increase of energy consumption, this is directly connected to an increase of CO2 production. The increased CO2 density in the atmosphere supports the climate warming of the

37、earth. One significant way to cope with the increased energy consumption without increasing the CO2 production is to use more renewable energy resources. Unfortunately, the available renewable energy supply is not aligned with the energy demand. To increase efficiency, the energy demand should be al

38、igned as much as possible with the available energy supply. To reach this goal communication between the various equipment and systems of the stakeholders within the energy field is necessary. This grid, exchanging information and energy between producers, consumers, distributors and metering is kno

39、wn as the “Smart Grid”. The EN 50491-12 series describes aspects of this smart grid that relate specifically to the premises (home/building) part of the smart grid, including the common interface between equipment in the premises and the smart grid. BS EN 50491121:2018EN 50491-12-1:2018 (E) 5 1 Scop

40、e This document specifies General Requirements and Architecture of an application layer interface between the Customer Energy Manager (CEM) and Smart Devices (SD) operating within the smart grid premises-side system (i.e. home or building but not industrial premises). This document does not include

41、requirements for: Safety; EMC; Data security; it is assumed that the underlying protocols will take the data security aspect into account; NOTE Although data security is not within the scope of this standard, in Clause 4 some high-level design guidelines for data security are provided. Special equip

42、ment (e.g. legacy heat pumps) with a direct physical connection to the grid, as such equipment bypasses the CEM and is not HBES/BACS enabled (covered by other standards than the EN 50491 series). 2 Normative references The following documents are referred to in the text in such a way that some or al

43、l of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50491-12, (all parts), General requirements for Home and Building Electroni

44、c Systems (HBES) and Building Automation and Control Systems 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addres

45、ses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1.1 Customer Energy Manager CEM internal automation function for optimizing the energy consumption, production and storage within the premises according to the preferenc

46、es of the customer using internal flexibilities and typically based on external information received through the Smart Grid Connection Point and possibly other data sources 3.1.2 Customer Energy Manager System CEM system allows the management of energy consumption, production and storage within the

47、premises, consisting of a CEM connected to one or more Resource Managers which themselves act as gateways to HBES / BACS, SASS and / or Smart Appliances BS EN 50491121:2018EN 50491-12-1:2018 (E) 6 3.1.3 Energy Management Gateway EMG access point (functional entity) sending and receiving smart grid r

48、elated information and commands between an actor in the Grid and the CEM, letting the CEM decide how to process the events Note 1 to entry: The communication is often ensured through an internet connection. 3.1.4 Head End System HES system that receives metering data in the advanced metering infrast

49、ructure 3.1.5 Home and Building Electronic Systems / Building Automation Control Systems HBES / BACS logical group of devices which uses a multi-application communication system where the functions are distributed and linked through a common communication process Note 1 to entry: HBES/BACS is used in homes and buildings plus their surroundings. Functions of the system are e.g.: switching, open loop controlling, closed loop controlling, monitoring and supervising.