ISO 9455-17-2002 Soft soldering fluxes - Test methods - Part 17 Surface insulation resistance comb test and electrochemical migration test of flux residues《软钎焊剂.pdf

《ISO 9455-17-2002 Soft soldering fluxes - Test methods - Part 17 Surface insulation resistance comb test and electrochemical migration test of flux residues《软钎焊剂.pdf》由会员分享，可在线阅读，更多相关《ISO 9455-17-2002 Soft soldering fluxes - Test methods - Part 17 Surface insulation resistance comb test and electrochemical migration test of flux residues《软钎焊剂.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、STANDARD FOR SPILL CONTAINMENT DEVICES FOR FLAMMABLE AND COMBUSTIBLE LIQUID ABOVEGROUND STORAGE TANKS Prepared and Published by: NATIONAL STANDARD OF CANADA CAN/ULC-S663:2011-R2016 (Reaffirmed 2016) Approved by:Underwriters Laboratories of Canada (ULC) was established in 1920 by letters patent issue

2、d by the Canadian Government. It maintains and operates laboratories and certication services for the examination, testing and certication of appliances, equipment, materials, constructions and systems to determine their relation to life, re and property hazards as well providing inspection services

3、. Underwriters Laboratories of Canada is accredited by the Standards Council of Canada as a Certication Organization, a Testing Organization, and an Inspection Body under the National Standards System of Canada. ULC Standards develops and publishes standards and other related publications for buildi

4、ng construction, security and burglar protection, environmental safety, electrical equipment, re protection equipment, gas and oil equipment, thermal insulation products, materials and systems, energy use in the built environment and electrical utility safety. ULC Standards is a not-for-prot organiz

5、ation and is accredited by the Standards Council of Canada as a Standards Development Organization. National Standards of Canada developed by ULC Standards conform to the criteria and procedures established by the Standards Council of Canada. Such standards are prepared using the consensus principle

6、 by individuals who provide a balanced representation of interests relevant to the subject area on a national basis. ULC is represented across Canada as well as many countries worldwide. For further information on ULC services, please contact: Customer Service: 1-866-937-3852 National Standard of Ca

7、nada A National Standard of Canada is a standard developed by an SCC- accredited Standards Development Organization (SDO), and approved by the Standards Council of Canada (SCC), in accordance with SCCs: Requirements and Guidance-Accreditation for Standards Development Organizations, and Requirements

8、 and Guidance-Approval of National Standards of Canada Designation. More information on National Standard requirements can be found at www.scc.ca. An SCC-approved standard reects the consensus of a number of experts whose collective interests provide, to the greatest practicable extent, a balance of

9、 representation of affected stakeholders. National Standards of Canada are intended to make a signicant and timely contribution to the Canadian interest. SCC is a Crown corporation within the portfolio of Industry Canada. With the goal of enhancing Canadas economic competitiveness and social well-be

10、ing, SCC leads and facilitates the development and use of national and international standards. SCC also coordinates Canadian participation in standards development, and identies strategies to advance Canadian standardization efforts. Accreditation services are provided by SCC to various customers,

11、including product certiers, testing laboratories, and standards development organizations. A list of SCC programs and accredited bodies is publicly available at www.scc.ca. Users should always obtain the latest edition of a National Standard of Canada from the standards development organization resp

12、onsible for its publication, as these documents are subject to periodic review. CORPORATE HEADQUARTERS Underwriters Laboratories of Canada 7 Underwriters Road Toronto, Ontario M1R 3A9 Telephone: (416) 757-3611 Fax: (416) 757-9540 REGIONAL OFFICES PACIFIC OFFICE 13775 Commerce Parkway, Suite 130 Rich

13、mond, British Columbia V6V 2V4 Telephone: (604) 214-9555 Fax: (604) 214-9550 EASTERN OFFICE 6505, Rte Transcanadienne, Suite 330 St-Laurent, Qubec H4T 1S3 Telephone: (514) 363-5941 Fax: (514) 363-7014 For further information on ULC standards, please contact: ULC STANDARDS 171 Nepean Street, Suite 40

14、0 Ottawa, Ontario K2P 0B4 Telephone: (613) 755-2729 Fax: (613) 231-5977 E-mail: customerserviceulc.ca Web site: www.ulc.ca The intended primary application of this standard is stated in its scope. It is important to note that it remains the responsibility of the user of the standard to judge its sui

15、tability for this particular application. Copies of this National Standard of Canada may be ordered from ULC Standards. CETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONS FRANAISE ET ANGLAISECAN/ULC-S663:2011-R2016 STANDARD FOR SPILL CONTAINMENT DEVICES FOR FLAMMABLE AND COMBUSTIBLE LIQUID A

16、BOVEGROUND STORAGE TANKS ICS 23.020.10, 75.200 Prepared and Published by: Approved by: First EditionApril 2011 REAFFIRMEDMARCH 2016 Copyright 2016 ULC Standards All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without pri

17、or permission. NATIONAL STANDARD OF CANADATABLE OF CONTENTS ULC STANDARDS COMMITTEE ON FITTINGS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS . .I PREFACE II 1. SCOPE 1 2. REFERENCE PUBLICATIONS .2 3. GLOSSARY 4 4. CONSTRUCTION .4 4.1 ELECTRICAL FEATURES .4 4.1.1 General .4 4.1.2 Hazardous Locations .4 4.1.

18、3 Electrical Bonding 5 4.2 MATERIALS .5 4.3 CORROSION RESISTANCE .5 4.4 CONNECTIONS 5 5. PERFORMANCE .5 5.1 GENERAL .5 5.2 ELECTRICAL CONTINUITY TEST .6 5.3 AIR-OVEN AGING TEST 6 5.4 IMMERSION TEST .6 5.5 LEAKAGE TESTS 7 5.5.1 External Leakage Test 7 5.5.2 Leakage Test for Liquid Conducting Componen

19、ts 7 5.5.3 Internal Leakage Test 7 5.6 IMPACT RESISTANCE LOW TEMPERATURE .7 5.7 FREEZE / THAW TEST .7 5.8 SALT SPRAY TEST 8 6. MARKING 8 7. INSTRUCTIONS 8ULC STANDARDS COMMITTEE ON FITTINGS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS NAME AFFILIATION REGION CATEGORY M. Mailvaganam (Chair) M Mailvaganam Co

20、nsultant Ontario General Interest B. Andrew Veeder-Root U.S.A. Producer W. Armstrong AT Monitors U.S.A. Producer A. Barker Technical Standards B CCME Environmental Code of Practice for Aboveground and Underground Storage Tank Systems Containing Petroleum and Allied Petroleum Products; and C Regulations of the appropriate authority having jurisdiction. APRIL 2011 CAN/ULC-S663:2011-R2016 1