IEEE C37 2-2008 en Electrical Power System Device Function Numbers Acronyms and Contact Designations《电力系统装置功能编号、首字母缩略词和连接标记》.pdf

《IEEE C37 2-2008 en Electrical Power System Device Function Numbers Acronyms and Contact Designations《电力系统装置功能编号、首字母缩略词和连接标记》.pdf》由会员分享，可在线阅读，更多相关《IEEE C37 2-2008 en Electrical Power System Device Function Numbers Acronyms and Contact Designations《电力系统装置功能编号、首字母缩略词和连接标记》.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、IEEE Std C37.2-2008(Revision of IEEE Std C37.2-1996)IEEE Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations IEEE3 Park Avenue New York, NY 10016-5997, USA3 October 2008IEEE Power and Energy SocietySponsored by theSubstations Committeeand thePower Systems

2、 Relaying CommitteeC37.2TMIEEE Std C37.2TM-2008 (Revision of IEEE Std C37.2-1996) IEEE Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations Sponsor Substations Committee and the Power Systems Relaying Committee of the IEEE Power and Energy Society Approved

3、 12 June 2008 IEEE-SA Standards Board Abstract: The definition and application of function numbers and acronyms for devices and functions used in electrical substations and generating plants and in installations of power utilization and conversion apparatus are covered. The purpose and use of the nu

4、mbers and acronyms is discussed, and 95 numbers and 17 acronyms are assigned. Function numbers or function acronyms for arc fault detection, high impedance fault detection, human machine interface, communications devices, digital fault and sequence of event recorders, power quality recorders, substa

5、tion time sources and synchrophasor devices are among those that have been added. The use of prefixes and suffixes to provide a more specific definition of a function is defined. Device contact designations are also covered. Keywords: control, designations, device functions, device function acronyms

6、, device function numbers, function numbers, IEC 61850, relay, switchgear The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2008 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 3 October 200

7、8. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. iv Copyright 2008 IEEE. All rights res

8、erved. Introduction This introduction is not part of IEEE Std C37.2-2008, IEEE Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations. This standard applies to systems used for the monitoring, protection, switching, and controlling of electric apparatus in u

9、nattended and attended substations, generating stations, power utilization and conversion facilities, and equipment designed for automatic protection of power systems. This standard is a revision of IEEE Std C37.2-1996. A definition for the previously unused Device Number 16 has been added, as well

10、as acronyms for 17 new devices / functions. Acronyms were added for these functions, rather than utilizing numbers above 99, as those numbers are already in use in some installations. See Clause 3.4 for examples. Definitions of some device functions have been improved for present applications, and a

11、dditional suggested suffix letters / definitions have been added. An annex, cross-referencing IEEE Std C37.2 device function numbers to IEC 61850 logical nodes, has been added. Previous revisions were approved and published as standards dated 1996, 1991, 1987, 1979, 1962, 1956, 1945, and 1937. The o

12、riginal work on this subject was approved in 1928 and published by the American Institute of Electrical Engineers (AIEE) as AIEE No. 26. Notice to users Laws and regulations Users of these documents should consult all applicable laws and regulations. Compliance with the provisions of this standard d

13、oes not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable l

14、aws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,

15、 and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rights in copyright to this document. Updating of IEEE documents Users of IEEE standards should be aware that these doc

16、uments may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda,

17、 or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Standards Association web site at http:/ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEE

18、E at the address listed previously. v Copyright 2008 IEEE. All rights reserved. For more information about the IEEE Standards Association or the IEEE standards development process, visit the IEEE-SA web site at http:/standards.ieee.org. Errata Errata, if any, for this and all other standards can be

19、accessed at the following URL: http:/standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL for errata periodically. Interpretations Current interpretations can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/interp/ index.html. Pate

20、nts Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE is not re

21、sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in a

22、ny licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Sta

23、ndards Association. vi Copyright 2008 IEEE. All rights reserved. Participants At the time this standard was submitted to the IEEE-SA Standards Boards for approval., the Joint Working Group C5 had the following membership: John T. Tengdin, Chair William J. Ackerman, Vice Chair Alexander Apostolov Geo

24、rge Bartok Robert Beresh Oscar Bolado Arvind Chaudhary Ratan Das Kevin Donahoe Michael Dood Ronald Farquharson Jeffery Gilbert Daniel Goodrich Flavio Graciaa George Gresko Chris Huntley Hachidai Ito Charles Jackson Shoukat Khan Jeffrey Kukla Steven Kunsman Marc Lacroix Craig McClure Bruce Muschlitz

25、Craig Preuss Mario Ranieri Raseek Rifaat Moh Sachdev Samuel Sciacca H. Lee Smith Gary Touryan Joe Uchiyama Eric Udren John Vergis Kevin White Murty Yalla The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstent

26、ion. William J. Ackerman Steven Alexanderson Michael Anderson David Apps Stan Arnot Ali Al Awazi Peter Balma Radoslav Barac George Bartok Michael J. Basler David Bassett David Beach Kenneth Behrendt Robert Beresh Steven Bezner Stan Billings Wallace Binder Kenneth Birt Thomas Blair William Bloethe Os

27、car Bolado Anne Bosma Stuart Bouchey Steven Brockschink Chris Brooks Gustavo Brunello Christoph Brunner Jeffrey Burnworth Ted Burse William Byrd Eldridge Byron Bill Chiu Robert Christman Stephen Conrad Tommy Cooper R. W. Corlew James Cornelison Luis Coronado Ratan Das Kevin Donahoe Gary L. Donner Mi

28、chael Dood Neal Dowling Paul Drum Donald Dunn Douglas J. Edwards Gearold O. H. Eidhin W. Elmore Ahmed Elneweihi Gary Engmann James Fairris Ronald Farquharson Keith Flowers Kenneth Fodero Paul Forquer Fredric Friend Rafael Garcia Jonathan Gardell James Gardner Michael J. Garland Jeffrey Gilbert Miete

29、k Glinkowski Jalal Gohari Manuel Gonzalez Edwin Goodwin Flavio Graciaa James Graham Keith Gray Stephen Grier Charles Grose Randall Groves Charles Henville Gary Heuston Scott Hietpas Werner Hoelzl Gary Hoffman Jerry Hohn Dennis Holstein David Horvath James Huddleston Chris Huntley Paul Jamieson Mlade

30、n Jeftic Brian Johnson Gerald Johnson James Jones Piotr Karocki Ethan Kim J. Koepfinger Boris Kogan David W. Krause Jim Kulchisky Saumen Kundu L. Kurtz Marc Lacroix John Laforce Chung-Yiu Lam Stephen Lambert Raluca Lascu Albert Livshitz Federico Lopez William Lowe Keith N. Malmedal Kenneth Martin Fr

31、ank W. Mayle William Mcbride Walter Mccannon John McDonald vii Copyright 2008 IEEE. All rights reserved. Michael McDonald Michael Meisinger John Merando Jeffrey Merryman T. David Mills Georges Montillet Jose Morales Charles Morse Kimberly Mosley Brian Mugalian Jerry Murphy Anthony Napikoski Dennis N

32、eitzel Arthur Neubauer Michael S. Newman Joe Nims Gary Nissen T. Olsen Donald Parker Donald Platts Louie Powell Craig Preuss Iulian Profir Madan Rana John Randolph Mario Ranieri Peter Raschio Michael Roberts Charles Rogers Charles Ross Edward Rowe Miriam Sanders Steven Sano Bartien Sayogo Thomas Sch

33、ossig Robert Schuerger Samuel Sciacca Tony Seegers Douglas Seely Devki Sharma Hyeong Sim H. Lee Smith James E. Smith Jerry Smith John Spare Charles Sufana Paul Sullivan Alourdes Sully James Swank Richard Taylor John T. Tengdin David Tepen Malcolm Thaden Michael Thesing Michael Thompson Wayne Timm Er

34、ic Udren John Vergis Jane Verner Kevin White Larry Yonce Richard Young Roland Youngberg Oren Yuen David Zaprazny Matthew Zeedyk James Ziebarth Ahmed Zobaa When the IEEE-SA Standards Board approved this standard on 12 June, 2008, it had the following membership: Robert M. Grow, Chair Thomas Prevost,

35、Vice Chair Steve M. Mills, Past Chair Judith Gorman, Secretary Victor Berman Richard DeBlasio Andy Drozd Mark Epstein Alexander Gelman William Goldbach Arnie Greenspan Ken Hanus Jim Hughes Richard Hulett Young Kyun Kim Joseph L. Koepfinger* John Kulick David J. Law Glenn Parsons Ron Petersen Chuck P

36、owers Thomas Prevost Narayanan Ramachandran Jon Walter Rosdahl Anne-Marie Sahazizian Malcolm Thaden Howard Wolfman Don Wright *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Satish K. Aggarwal, NRC Representative Michael H. Kelley, NIST Representative Lor

37、raine Patsco IEEE Standards Program Manager, Document Development Soo Kim IEEE Standards Program Manager, Technical Program Development vi i Copyright 2008 IEEE. All rights reserved. Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 2. Normative references 2 3. Standard device / function number and

38、 function acronym descriptions 2 3.1 Standard device / function numbers 2 3.2 Device / Function acronyms To be used in the same manner as the function numbers defined in Subclause 3.1. 13 3.3 Addition of prefixes and suffixes. 14 3.4 Suggested prefixes. 15 3.5 Suggested suffix letters 15 3.6 Suffix

39、numbers 19 3.7 Devices performing more than one function . 19 4. Device contacts. 19 4.1 Auxiliary, position, and limit switch contacts . 19 4.2 Limit switches 23 4.3 Torque limit switches 24 4.4 Other switches . 24 4.5 Representation of device contacts on electrical diagrams 24 Annex A (informative

40、) Device 11Multi-function device representations 27 A.1 Introduction 27 A.2 Device 11First representation methodEmpty box. 27 A.3 Device 11Second representation methodFilled box 28 A.4 Device 11Third representation methodList box 28 Annex B (informative) Explanation of device 16 and its suffixes 30

41、Annex C (informative) Device 64Ground detector relay applications . 34 Annex D (informative) Relationship between IEEE C37.2 device function numbers and IEC 61850-7-4 logical nodes. 38 Annex E (informative) Device index 41 Annex F (informative) Bibliography 46 i1 Copyright 2008 IEEE. All rights rese

42、rved. IEEE Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations IMPORTANT NOTICE: This standard is not intended to assure safety, security, health, or environmental protection in all circumstances. Implementers of the standard are responsible for determini

43、ng appropriate safety, security, environmental, and health practices or regulatory requirements. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under t

44、he heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/ disclaimers.html. 1. Overview 1.1 Scope This standard applies to the definition and application of function number

45、s and acronyms for devices and functions used in electrical substations and generating plants and in installations of power utilization and conversion apparatus. NOTEHistorically, device function numbers have typically represented individual or component devices. These numbers and acronyms may also

46、be used to represent individual functions within multi-function devices or software programs, and that may contain both protection- and non-protection-oriented functions.11.2 Purpose A device function number, with an appropriate prefix and appended suffix (or an acronym), is used to identify the fun

47、ction(s) of each device installed in electrical equipment. These numbers and acronyms are to be used in drawings, elementary and connection diagrams, instruction books, publications, and specifications. The device number or acronym may be physically placed on, or adjacent to, each device on the asse

48、mbled equipment. 1Notes in text, tables, and figures are given for information only and do not contain requirements needed to implement the standard. IEEE Std C37.2-2008 IEEE Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations 2 Copyright 2008 IEEE. All r

49、ights reserved. NOTEMost of these device function designations have been developed as a result of usage over many years, with the first version of this standard having been published in 1928. They may define the actual function the device performs in equipment or they may refer to the electrical or other quantity to which the device is responsive. Hence, in some instances, there may be a choice of the function number or acronym to be used for a given application. The preferable choice should be the function number or acronym that is recognized to have the na