IEEE 1431 CORR 1-2008 en Standard Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros Corrigendum 1 Figure 1 Gyro Axes and Misalignment A.pdf

《IEEE 1431 CORR 1-2008 en Standard Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros Corrigendum 1 Figure 1 Gyro Axes and Misalignment A.pdf》由会员分享，可在线阅读，更多相关《IEEE 1431 CORR 1-2008 en Standard Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros Corrigendum 1 Figure 1 Gyro Axes and Misalignment A.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、IEEE Std 1431-2004/Cor 1-2008(Corrigendum toIEEE Std 1431-2004)IEEE Standard Specification Format Guide and Test Procedure for Coriolis Vibratory GyrosCorrigendum 1: Figure 1 Gyro Axes and Misalignment AnglesSponsorGyro and Accelerometer Panelof theIEEE Aerospace and Electronic Systems SocietyApprov

2、ed 26 September 2008IEEE-SA Standards BoardCopyright 2008 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved.Published 2008. Printed in the United States of America.This correction sheet may be freely reproduced and distributed in order to maintain the utility and cur

3、rencyof the underlying standard. This correction sheet may not be sold, licensed, or otherwise distributed for anycommercial purposes whatsoever. The content of this correction sheet may not be modified. Thisinformation has been incorporated into the second printing of IEEE Std 1431-2004.Introductio

4、nThis is the first corrigendum to IEEE Std 1431-2004.Notice to usersLaws and regulationsUsers of these documents should consult all applicable laws and regulations. Compliance with theprovisions of this standard does not imply compliance to any applicable regulatory requirements.Implementers of the

5、standard are responsible for observing or referring to the applicable regulatoryrequirements. IEEE does not, by the publication of its standards, intend to urge action that is not incompliance with applicable laws, and these documents may not be construed as doing so. CopyrightsThis document is copy

6、righted by the IEEE. It is made available for a wide variety of both public and privateuses. These include both use, by reference, in laws and regulations, and use in private self-regulation,standardization, and the promotion of engineering practices and methods. By making this documentavailable for

7、 use and adoption by public authorities and private users, the IEEE does not waive any rights incopyright to this document.Updating of IEEE documentsUsers of IEEE standards should be aware that these documents may be superseded at any time by theissuance of new editions or may be amended from time t

8、o time through the issuance of amendments,corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of thedocument together with any amendments, corrigenda, or errata then in effect. In order to determine whethera given document is the current edition and

9、whether it has been amended through the issuanceof amendments, corrigenda, or errata, visit the IEEE Standards Association website at http:/ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEEE at the address listed previously.For more information about the IEEE Standards Association or the IEE

10、E standards development process,visit the IEEE-SA website at http:/standards.ieee.org.ErrataErrata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL forerrata periodi

11、cally.InterpretationsCurrent interpretations can be accessed at the following URL: http:/standards.ieee.org/reading/ieee.updates/interp/index.html. This introduction is not part of IEEE Std 1431-2004/Cor 01-2008, IEEE Standard Specification Format Guide andTest Procedure for Coriolis Vibratory Gyros

12、 Corrigendum 1: Figure 1Gyro Axes and Misalignment Angles.PatentsAttention is called to the possibility that implementation of this standard may require use of subject mattercovered by patent rights. By publication of this standard no position is taken with respect to the existence orvalidity of any

13、 patent rights in connection therewith. The IEEE is not responsible for identifying EssentialPatent Claims for which a license may be required, for conducting inquiries into the legal validity or scopeof Patents Claims or determining whether any licensing terms or conditions provided in connection w

14、ithsubmission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patentrights, and the risk of infringement of such rights, is entirely their own responsibility.

15、 Further informationmay be obtained from the IEEE Standards AssociationRandall Curey, ChairReese Sturdevant, Vice ChairThe following members of the individual balloting committee voted on this corrigendum. Balloters mayhave voted for approval, disapproval, or abstention.When the IEEE-SA Standards Bo

16、ard approved this standard on 26 September 2008, it had the followingmembership:Robert M. Grow, ChairThomas Prevost, Vice ChairSteve M. Mills, Past ChairJudith Gorman, Secretary*Member EmeritusAlso included are the following nonvoting IEEE-SA Standards Board liaisons:Satish K. Aggarwal, NRC Represen

17、tativeMichael H. Kelly, NIST RepresentativeCleon BarkerHoward HavlicsekJean-Francois Kieffer Robert MartinezBruce YoumansCleon BarkerKeith ChowRandall CureyRandall GrovesWerner HoelzlJean-Francois KiefferToru KitamuraRobert MartinezBartein SayogoDaniel TazartesVictor BermanRichard DeBlasioAndy Drozd

18、Mark EpsteinAlexander GelmanWilliam R. GoldbachArnold M. GreenspanKenneth S. HanusJim HughesRichard H. HulettYoung Kyun KimJoseph L. Koepfinger*John KulickDavid J. LawGlenn ParsonsRonald C. PetersenChuck PowersNarayanan RamachandranJon Walter RosdahlAnne-Marie SahaziziaMalcolm V. ThadenHoward L. Wol

19、fmanDon WrightCorrigendum 1: Figure 1 Gyro Axes and Misalignment AnglesIMPORTANT NOTICE: This standard is not intended to assure safety, security, health, or environmental protectionin all circumstances. Implementers of the standard are responsible for determining appropriate safety, security,enviro

20、nmental, and health practices or regulatory requirements.This IEEE document is made available for use subject to important notices and legal disclaimers. These notices anddisclaimers appear in all publications containing this document and may be found under the heading “ImportantNotice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained onrequest from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html.On page 13, subclause 5.4.5, replace Figure 1 with the following:Figure 1Gyro axes and misalignment angles