UL 1995 CRD-2016 UL Standard for Safety Heating and Cooling Equipment - Section Paragraph Reference 34 41 Subject Editorial revisions to correct references related to Clause 34 41.pdf

《UL 1995 CRD-2016 UL Standard for Safety Heating and Cooling Equipment - Section Paragraph Reference 34 41 Subject Editorial revisions to correct references related to Clause 34 41.pdf》由会员分享，可在线阅读，更多相关《UL 1995 CRD-2016 UL Standard for Safety Heating and Cooling Equipment - Section Paragraph Reference 34 41 Subject Editorial revisions to correct references related to Clause 34 41.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared and published by Underwriters Laboratories Inc.(UL). It is normative for the a

2、pplicable UL Product Certification Program(s); however, it is currently notpart of the UL Standard(s) referenced below.Product Category (CCN): LZFEStandard Number: UL 1995Standard Title: Standard for Heating and Cooling EquipmentEdition Date: July 31, 2015Edition Number: 5Section / Paragraph Referen

3、ce: 34.41Subject: Editorial revisions to correct references related to Clause 34.41.DECISION:34.41 A contactor provided to comply with Clause 34.32 37 or Clause 34.33 38, shall be rated for 100,000endurance cycles.RATIONALE FOR DECISION:When the 5thedition of UL 1995 was published, the clause number

4、s referenced in Clause 34.41 were notupdated, but incorrectly refer to 4thedition clause numbering. This Certification Requirement Decision isintended to document this correction.Clause 34.32 and Clause 34.33 from the 4thedition are the same as Clause 34.37 and Clause 34.38 inthe 5thedition (respect

5、ively).Copyright 2016 Underwriters Laboratories Inc.UL, in performing its functions in accordance with its objectives, does not guarantee or warrant thecorrectness of Certification Requirement Decisions it may issue or that they will be recognized or adoptedby anyone. Certification Requirement Decis

6、ions are the opinion of Underwriters Laboratories Inc. inpractically applying the requirements of the standard. They do not represent formal interpretations of thestandard under American National Standards Institute (ANSI) processes. UL shall not be responsible toanyone for the use of or reliance up

7、on Certification Requirement Decisions by anyone. UL shall not incurany obligation or liability for damages, including consequential damages, arising out of or in connectionwith the use or reliance upon Certification Requirement Decisions. The electronic version of theCertification Requirement Decision is the current version and previously printed copies may be outdated.This document is published as a service to ULs certification customersUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULSTANDARD NUMBER: UL 1995 -2-No Text on This Page